Vivo STAND-SHELF2C User manual

Above/Below Clamp-on 13” Dual Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-shelf2c
SKU: STAND-SHELF2C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x2)
Shelf
B(x2)
Vertical Support
C(x2)
Shelf Bracket
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D(x2)
Clamp Brace
F(x2)
So Pad
G(x2)
Foam Pad
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Per Shelf
S-A (x2)
M4x10mm Screw
S-B (x4)
M6x12mm Screw
S-C (x12)
M6x30mm Screw
S-D (x2)
M8x40mm Screw
S-E (x2)
M4 Washer
T-A (x1)
4mm Allen Wrench
T-B (x1)
6 mm Allen Wrench
TOOLS NEEDED
Phillips
Screwdriver
E(x2)
Clamp Plate

3
ASSEMBLY STEPS
STEP 1
Secure Shelf (A) into top holes on Vertical Support (B) using M6x30mm Screws (S-C) and
4mm Allen Wrench (T-A).
Secure remaining Shelf (A) to Shelf Bracket (C) using M6x30mm Screws (S-C) and 4mm
Allen Wrench (T-A).
S-C
A
T-A
B
Attach Shelf Bracket (C) to middle holes
of Vertical Support (B) using M6x30mm
Screws (S-C) and 4mm Allen Wrench
(T-A). Select mounting holes based on
desired shelf height.
T-A
C
S-C
A
S-C
T-A
C
B

4
INSTALLATION STEPS
INSTALLATION OPTIONS:
Choose your desired installation method and follow appropriate steps below.
ABOVE DESK
Page 4-5
BELOW DESK
Page 6-7
Above Desk
STEP 1
Thread M8x40mm Screws (S-D) into Clamp Braces (D) with Clamp Plate (E), M4x10mm
Screws (S-A) and M4 washer (S-E). Tighten using 6mm Allen Wrench (T-B) and a Phillips
Screwdriver. Mount the clamp assemblies to Vertical Supports (B) using M6x12mm
Screws (S-B) and 4mm Allen Wrench (T-A).
D
S-A
S-E
S-D
T-A
B
S-B
T-B

5
STEP 2
STEP 3
Remove adhesive backing from So Pads (F) and Foam Pads (G) and apply them to Vertical
Supports (B) as shown below.
Secure the shelf assembly above the desktop by tightening M8x40mm Screws (S-D) using
6mm Allen Wrench (T-B).
F
F
T-B
S-D

6
Below Desk
STEP 1
STEP 2
Thread M8x40mm Screws (S-D) into Vertical Supports (B) with Clamp Plates (E),
M4x10mm Screws (S-A) and M4 Washers (S-E). Tighten using 6mm Allen Wrench (T-B)
and a Phillips Screwdriver.
Assemble Clamp Braces (D) to Vertical Supports (B) using M6x12mm Screws (S-B) and
4mm Allen Wrench (T-A).
S-D B
E
S-A
S-E
T-B
T-A
B
DS-B

7
STEP 3
Remove adhesive backing from So Pads (F) and apply them to Clamp Braces (D) as
shown below.
Secure the shelf assembly below the desktop by tightening M8x40mm Screws (S-D) using
6mm Allen Wrench (T-B).
F
D
T-B
S-D

LAST UPDATED: 04/05/2023
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303