Vivo MOUNT-KB05T User manual

[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Black Clamp-on Tilting Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05t
SKU: MOUNT-KB05T

2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Keyboard
Tray
B(x2)
Connecting Plate
C (x2)
Tilting Track
S-A (x6)
M4x7mm
Screw
S-B (x8)
M5x12mm
Panhead Screw
S-C (x12)
M5x12mm
Flathead Screw
F (x2)
Clamp Pad
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
D (x2)
Clamps
E (x1)
Keyboard Stop
NOTE: Some hardware will not be used.

3
ASSEMBLY STEPS
STEP 1
STEP 2
Connect Keyboard Tray (A) using Connecting Plate (B), M5x12mm Flathead Screws (S-C), and a
Phillips screwdriver.
Attach Keyboard Stop (E) to tray assembly using M5x12mm Flathead Screws (S-C) and a Phillips
screwdriver.
A
S-C
E
B
S-C

4
STEP 3
STEP 4
Connect Tilting Track (C) to tray assembly using M5x12mm Panhead Screws (S-B) and a Phillips
screwdriver.
Note: Make sure the tilt adjustment knobs are closer to the front edge of the tray
Turn assembly over and connect Clamps (D) to side of Tilting Track (C) using M4x7mm Screws (S-A)
and a Phillips screwdriver, as shown below.
C
S-B
D
S-A
C

5
STEP 5
Place Clamp Pad (F) onto Clamp (D), as shown below. Slide assembly onto desktop and secure by
tightening Clamp (D) knobs.
F
D
potkseD

6
STEP 6
STEP 7
Gently pull keyboard tray to bring it forward. Gently push it back to return it to it’s under desktop
storage position.
Remove both locking knobs from Tilting Brackets (C), adjust to desired position, then reinstall
locking knobs into new adjustment position to secure.
C

7
THIS PAGE INTENTIONALLY LEFT BLANK

LAST UPDATED: 08/15/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303