Vivo MOUNT-KB05HB User manual

Clamp-on Height Adjustable Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05hb
SKU: MOUNT-KB05HB/HA/HD/HW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please contact our product support team at 309-278-5303 or [email protected]om for further assistance.
Check carefully to make sure there are no missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
A(x1)
Keyboard Tray
B(x2)
Slider Bracket
D(x2)
Support Bracket
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
C(x2)
Clamp
E(x2)
Pad
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-A (x6)
M4x7mm Screws
S-B (x8)
M5x12mm Screws
S-C (x6)
M5x8mm Screws
T-A (x1)
4mm Allen Wrench
PACKAGE CONTENTS

3
ASSEMBLY STEPS
STEP 1
Assemble Slider Brackets (B) to the Support Brackets (D) using M4x7mm Screws (S-A),
making sure the countersunk holes on Support Brackets (D) are facing outward, as shown
below. Tighten with a Phillips screwdriver.
S-A
D
B
OTHER ASSEMBLY OPTIONS:
Increased Tray Extension
Clamp can be oset using the extra
holes in Slider Brackets (B) to allow
the tray to be pulled out an extra 1.2”
(30mm) when in use. If mounted this
way the tray will sit further out from
desk edge.
Compact Desk Setups
For increased leg room under keyboard
tray, the desk clamps can be installed
directly to the Slider Brackets (B) without
use of Support Brackets (D).
Secure Clamps (C) to the side of Slider
Brackets (B) using M4x7mm Screws
(S-A) with Phillips screwdriver. Ensure
countersunk holes are facing outward.
NOTE: Countersunk holes
should be facing outward.
S-A
C
B

4
STEP 2
Assemble Slider Brackets (B) with Support Brackets (D) to the Keyboard Tray (A)
using M5x12mm Screws (S-B), and tighten with a Phillips screwdriver. The Support
Brackets (D) be on the opposite side of the tray as the Keyboard Stopper (A1).
A
A1
S-B
B
D

5
STEP 3
Assemble Clamps (C) to Support Brackets (D) at desired height using M5x8mm
Screws (S-C). Tighten with a Phillips screwdriver.
Adjusting Clamp for Greater Desktop
Thickness
Clamps are pre-assembled for
compatibility with desktops 0-65mm
(2.56”) thick. The clamp features two
additional height settings if the
pre-assembled clamp does not work with
your desktop.
Remove the preinstalled screws using
4mm Allen Wrench (T-A) and adjusting the
position of the upper clamp according to
your desktop thickness.
0-45mm (1.77”)
Desktop Thickness:
Use upper hole set.
5-85mm (0.197” - 3.35”)
Desktop Thickness:
Use lower hole set.
T-A
5 Height
Settings
Highest
Setting
Lowest
Setting
C
D
S-C

6
STEP 4
Place assembled keyboard mount on edge of desk, then slide Pads (E) on the
underside of each Clamp (C). Tighten clamps to secure to desktop
NOTE: To ensure keyboard tray is level, do not over-tighten clamps. Slide
keyboard tray forward/back to desired position.
Keyboard tray now ready for use.
E
C

7
[ THIS PAGE INTENTIONALLY LEFT BLANK ]

LAST UPDATED: 08/28/2023
REV3
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303