Vivo MOUNT-SF04R User manual

Under/Above TV Glass VESA Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-sf04r
SKU: MOUNT-SF04R
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
1 (x1)
Shelf
2(x2)
VESA Bracket
3(x1)
Horizontal
Bracket
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
4 (x1)
Right Shelf
Support
5 (x1)
Le Shelf
Support
6 (x6)
Adhesive Pad
7(x6)
M6 Nut
8(x6)
M6 Washer
9(x6)
M6 Bolt
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
11 (x1)
Wrench
10 (x8)
Plastic Washer

3
ASSEMBLYSTEPS
STEP 1
OPTION A
Insert M6 bolts (9) through the sides of the horizontal bracket (3) making sure the screw
thread is facing out, and place a plastic washer (10) on each one. Install the right and
(4, 5) by placing onto the bolts, then secure using another plastic
washer, M6 washer (8) and M6 nut (7) on each bolt. Assemble with the open side of the
horizontal bracket facing up for below TV mounting (Option A), or open side down for
above TV mounting (Option B). Tighten with the wrench (11).
OPTION B
78
3
5
4
10
10
9
78
3
5
4
10
10
9
11
11

4
STEP 2
OPTION A
Assemble the horizontal bracket (3) to the lower or
upper holes of the VESA brackets (2) using M6 bolts
(9), x2 M6 washers (8) and x2 M6 nuts (7), making
sure the small flat side on each VESA bracket is
facing out. Adjust according to the width of your
TVʼs VESA mounting hole pattern and tighten with
the wrench (11).
NOTE: Only if mounting to TV with 400mm wide
VESA pattern, the VESA brackets (2) will need to be
flipped as shown.
11
3
2
9
8
7
11
8
7
9
3
2
OPTION B
400mm Wide VESA Pattern

5
STEP 3
OPTION A
Apply x3 adhesive pads (6) to the top of each support bracket, then place the shelf (1) on
top, making sure the shelf is straight and centered.
OPTION B
6
1
6
1

6
STEP 4
Mount the assembled shelf to the TV. If TV will
be installed to a VESA mount, place the shelf
brackets between the TV and VESA mount.
(Please note, mounting screws are not included
with the shelf).
NOTE: Only if mounting to TV with 400mm wide
VESA pattern, some VESA mounts will require
the shelf brackets to be installed behind the
VESA mount.
OPTION B
OPTION A

7
STEP 5
To adjust the tilt angle, loosen the lower M6 nut on each side, adjust to desired angle, then
re-tighten.
NOTE: It is recommended to set 5 degrees above the desired tilt to compensate for any
bracket settling
OPTION B
OPTION A

LAST UPDATED: 06/01/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303