Vivo STAND-V101C User manual

    
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- - !! "#   !
E (x1)
Pole
B (x1)
C-Clamp
C (x1)
Plastic Cap D (x1)
Clips
A (x1)
VESA Plate
F (x1)
Base Cover
G (x1)
Grommet
Base
H (x )
Soft Pads
I (x1)
Metal Pad
J (x1)
3mm Allen
Key
K (x1)
mm Allen
Key
L (x1)
6mm Allen
Key
M-C (x4)
M6x14
N (x2)
VESA
Bracket
O(x8)
M x12
P (x8)
M
M-A (x4)
M4x12
M-B (x4)
M x12
M (x2)
VESA
Bracket
M-D (x4)
M8x20
M-E (x4)
D
M-F (x4)
D8
M-G (x8)
Spacer

#$% 
2
 
Attach plastic cap (C) to pole (E).
 &
' 
Slide cable management clip (D) and base cover (F) on to bottom of pole (E). Attach pads (H)
to clamp (B) as shown in the diagram. Thread pole (E) onto clamp (B). Tighten grub screws in
bottom of clamp (B) using 3mm allen key (J). Secure clamp (B) to desktop as shown in
diagram.
' (
Remove screw from top of bolt in clamp (B). Stick soft pads (H) to bottom of grommet
base (G). Slide cable management clip (D) and base cover (F) on to bottom pole (E).
Thread pole (E) onto grommet base (G). Tighten grub screws in bottom of grommet
base (G) using 3mm allen key (J). Slide metal pad (I) over bolt and slide through
grommet hole in bottom of desktop. Thread into bottom of pole (E).
E
- '  
 )
- '  &
- '  )
Attach VESA bracket (A) to pole (E) using mm allen key (K).
Attach two bolts (M-A or M-B) and washers (M-E) to top mounting holes of
monitor, making sure to leave 3mm of threads exposed. Align bolts (M-A or M-B)
in VESA plate. Secure using two more bolts (M-A or M-B) and washers (M-E) in the
bottom two holes. Tighten all four bolts using phillips screwdriver.
Adjust tension in bracket
using 6mm allen key (L).
- '  * - '  +
Store allen keys (L,K) in
cable management clip (D)
for future adjustments.
Adjust as desired.
D

3
- ' ( )
- ' ( *
Attach VESA bracket (A) to pole (E) using mm allen key (K).
Adjust tension in bracket using 6mm allen key (L).
 ) ,-  ) ,-  ) ,-  ) ,-
A
E
 ) ,-
- ' ( 
- ' ( &
Mount VESA extension (M,N) to VESA bracket (A) using the
M x12 bolt (O) and the M nut (P) in 200mmx200mm or
200mmx100mm orientations according to mounting holes on
your monitor.
Attach VESA bracket (A) to back of monitor using bolts (M-C or M-D) and
washers (M-F). Spacer (M-G) may be required.
A
A

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
.% /
  
Last updated: 0 /1 /18 4
- ' ( +
Store allen keys (L,K) in cable management clips (D) for future adjustments.
- ' ( 0 Adjust as desired.
 ) ,-