Vivo STAND-V002C User manual

Single Monitor and Laptop Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002c
SKU: STAND-V002C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Pole
B(x1)
Clamp
C(x2)
Arm
I(x4)
Arm Cable Clip
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x2)
VESA Plate
E(x1)
Laptop Tray
F (x1)
Grommet Base
G(x1)
So Pad
H (x1)
Support Plate
K (x1)
Pole Cap
J(x1)
Pole Cable Clip
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-A (x4)
M4x8 Screw
S-B (x4)
M4 Nut
S-C (x2)
M6 Nut
S-D (x3)
M6x16 Screw
T-A (x1)
3mm Allen
Wrench
T-B (x1)
5mm Allen
Wrench
T-C (x1)
6mm Allen
Wrench
T-D (x1)
Wrench
M-A (x8)
M4x12
Thumbscrew
M-B (x8)
M4x30 Screw
M-C (x8)
M4 Spacer

3
ASSEMBLY STEPS
STEP 1
Option A: Desk Clamp Install
Loosen Clamp Bolt (B1) on Clamp (B). Install
Clamp (B) to Pole (A) using M6x16 Screws (S-D)
and 3mm Allen Wrench (T-A). Secure the clamp
assembly to the desktop.
Option B: Grommet Install
Using a Phillips screwdriver, remove the screw
from Clamp (B) and separate Clamp Bolt (B1)
from the clamp assembly. Install Grommet Base
(F) to Pole (A) using M6x16 Screws (S-D) and
3mm Allen Wrench (T-A). Remove adhesive
backing from So Pad (G) and stick it to the
bottom of Grommet Base (F). If not using an
existing through-hole for mounting, use a 3/8”
(10mm) drill bit to create a mounting hole in the
desired location. Thread Clamp Bolt (B1) with
Support Plate (H) through the mounting hole
and into Pole (A).
B
A
T-A
S-D
T-A
S-D
B1
B
F
A
H
B1
G

4
STEP 2
Slide Arm (C) over Pole (A). Secure Arm (C) at the desired height using 6mm Allen Wrench (T-C).
STEP 3
Slide Arm (C) over Pole (A). Secure Arm (C) at the desired height using 6mm Allen Wrench (T-C).
Insert Pole Cap (K) into the top of Pole (A).
K
CT-C
A
C
T-C
A

5
STEP 4
Attach Arm Cable Clips (I) to Arm (C) and Pole Cable Clip (J) to Pole (A).
STEP 5
Attach VESA Plate (D) to the back of the monitor using M4x12 Thumbscrews (M-A) or M4x30 Screws
(M-B) with M4 Spacers (M-C).
D
I
J
C
A

6
STEP 6
Assemble VESA Plate (D) to Laptop Tray (E) using M4x8 Screws (S-A) and M4 Nuts (S-B).
Tighten using Wrench (T-D) and a Phillips screwdriver.
STEP 7
Slide VESA Plates (D) onto Arms (C). Secure the assembly in place using M6 Nuts (S-C).
S-C
D
C
D
E
S-A
T-D
S-B

7
STEP 8
Place your laptop on Laptop Tray (E).
STEP 9
Adjust the tilt using 5mm Allen Wrench (T-B).
E
T-B

LAST UPDATED: 11/17/2021
REV1L
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303