Vivo MOUNT-DS01 User manual

Universal Docking Station Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-ds01
SKU: MOUNT-DS01
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
17.6lbs
(8kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
A (x1)
VESA Adapter
B(x1)
Mounting Bracket
C(x2)
Velcro Strap
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-A (x2)
M6x5mm
Screw
M-B (x4)
ST5x14mm
Screw
M-A (x4)
M4x10mm
Screw
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x2)
0.25” x 0.5”
Screw
D(x1)
Clamp
ASSEMBLY OPTION A | VESA Mounting
STEP 1
Connect Mounting Bracket (B) to VESA Adapter (A) using M6x5mm Screw (S-A) and a Phillips
screwdriver.
S-A
A
B

3
STEP 2
STEP 3
Mount assembly to VESA holes on monitor or over VESA plate using M4x10mm Screws (M-A) using a
Phillips screwdriver.
Slide Velcro Straps (C) through the bottom and side slots on Mounting Bracket (B), as shown.
C
B
OR
M-A
M-A

4
ASSEMBLY OPTION B | Under Desk Mounting
STEP 1
STEP 2
Slide Velcro Straps (C) through the bottom and side slots on Mounting Bracket (B), as shown.
Mark and drill pilot holes using a 3/32” (2.5mm) bit, drilling 3/8” (10mm) deep. Install Mounting Bracket
(B) to underside of desktop using ST5x14mm Screws (M-B) and a Phillips screwdriver.
C
B
M-B
B

5
ASSEMBLY OPTION C | Clamp Mounting
STEP 1
STEP 2
Choose one of the orientations below and attach Mounting Bracket (B) to Clamp (D) using 0.25” x 0.5”
Screws (S-B) and a Phillips screwdriver.
Slide Velcro Straps (C) through the bottom and side slots on Mounting Bracket (B), as shown.
B
D
D
D
B
B
S-B
S-B
S-B
C
B
B
B
C
C
1
1
2
2
3
3

6
STEP 3
Secure Clamp (D) to desired location.
12
3

7
THIS PAGE INTENTIONALLY LEFT BLANK

LAST UPDATED: 07/25/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303