Vivo MOUNT-KB15EN User manual

Clamp-on Extra Long Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb15eb
SKU: MOUNT-KB15EB/EN/EW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
11lbs
(4.99kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please contact our product support team at 309-278-5303 or [e-mail]
for further assistance. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A(x1)
Tray Set
C(x2)
Slider Bracket
B(x2)
Connecting
Brackets
E (x2)
Pad
F (x1)
Keyboard
Stop
D(x2)
Clamp
S-A (x6)
M4x7mm
Screws
S-B (x8)
M5x12mm
Pan Head
Screws
S-C (x12)
M5x12mm
Flat Head
Screws
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

4
ASSEMBLY STEPS
STEP 1
Assemble Slider Brackets (C) to Clamps (D) using M4x7mm Screws (S-A). Tighten with a Phillips
screwdriver.
NOTE: Clamp can be oset using the extra holes in Slider Brackets (C) to allow the tray to be pulled
out an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from desk edge.
D
Right
Side
Le
Side
S-A
C

5
STEP 2
Assemble Keyboard Tray Set (A) together with Connecting Brackets (B) using M5x12mm Flathead
Screws (S-C). Tighten with a Phillips screwdriver.
Attach Keyboard Tray Stop (F) to the underside of assembled keyboard tray using M5x12mm
Flathead Screws (S-C). Tighten with a Phillips screwdriver.
S-C
A
B
F
S-C

6
STEP 3
Assemble slider bracket assembly to tray assembly using M5x12mm screws (S-B), and tighten with a
Phillips screwdriver. The clamps must be on the opposite end from the center cable guide.
STEP 4
Place Pads (E) on the underside of each clamp. Place assembled keyboard mount on edge of desk and
tighten clamps. NOTE: To ensure keyboard tray is level, do not over-tighten clamps.
Slide keyboard tray forward/back to desired position.
S-B
Right
Side
Le
Side
Desktop
E

7
STEP 5
Slide keyboard tray forward/back to desired position.
Desktop

Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 08/04/2023
REV1.1
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303