Vivo STAND-TV07-S User manual

Black TV Stand with Storage Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv07-s
SKU: STAND-TV07-S
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x2)
Feet
C(x1)
Center Pole
K (x8)
M5 Lock Nut
L x5)
M6x65mm
Carriage Bolt
M(x5)
D6 Washer
N (x5)
M6 Lock Nut
J(x8)
M5x10mm
Bolt
E (x2)
VESA
Adapter
F (x2)
VESA
Adapter
G (x1)
Plastic Cover
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
P (x4)
M6x12mm
Bolt
O(x1)
M6 Flange
Nut
R x1)
4mm Allen
Wrench
M-F (x4)
D8 Washer
M-G (x8)
Spacer
M-E (x4)
D5 Washer
M-A (x4)
M4x14
M-B (x4)
M5x14
M-D (x4)
M8x20
M-C (x4)
M6x14
T x1)
Wrench
D (x1)
VESA Plate
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Q x2)
M6x60 Socket
Head Bolt
S x1)
5mm Allen
Wrench
H(x1)
Shelf
I(x1)
Shelf
Bracket

3
ASSEMBLY STEPS
STEP 1
Attach base (A) to feet (B) using x4 M6x60mm carriage bolts (L), x4 D6 washers (M), and x4 M6 lock nuts
(N). Tighten using the provided wrench (T).
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
SHELF
44lbs
(20kg)
STEP 2
Remove the two bolts, four washers, and two
nuts from the center pole (C) using the 4mm
Allen wrench (R) and the wrench (T).
Separate the two halves.
TV

4
STEP 3
Slide the plastic cover (G) over the pole (C).
G
Slide the top half of the pole back into the bottom
half and secure using the hardware you removed
in step 2.
STEP 4
Attach the center pole (C) to the base (A) using x1 M6x65 carriage bolt (L) through the front of the
base, D6 washer (M) and M6 lock nut (N). Use the x4 M6x12mm bolts (P) to secure the top. Tighten
using the 4mm Allen wrench (R) and wrench (T).

5
STEP 5
OPTION A: VESA Plate Only
Use (M-A or M-B) bolts along with (M-E) washers to attach the VESA plate (D) without the
adapters to the TV monitor. Make sure the “VIVO” logo on the front is right side up.
M-A/M- B
M- E
TV
TV
TV
OPTION B: VESA Plate with Adapters
For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA adapters (E, F) are
required. Attach adapters to VESA plate (D) using x8 M5x10mm bolts (J) and x8 M5 lock nuts
(K). Tighten using the wrench (T) and a Phillips screwdriver.

6
STEP 5 (Continued)
OPTION B: VESA Plate with Adapters (Continued)
Use bolts (M-A-M-D) along with washers (M-E,
M-F) to secure VESA plate with the adapters to
the back of your television. Make sure the “VIVO”
logo on the front is right side up. For a curved
television, spacer (M-G) may be required. TV
TV
TVTV
STEP 6
To attach the TV to the stand, loosen the nut at the top of the VESA plate and slide into the slot
on the top of the mounting plate on the pole. Secure the top and bottom of the VESA plate to
the stand by tightening both nuts using the wrench (T).

7
STEP 7
Remove clear protective film from both the
shelf clamp plate (H) and mounting bracket
(I). Partially insert M6x60 socket head bolts (Q)
into the shelf using the 5mm Allen wrench (S)
as shown.
NOTE: Do not fully tighten screws at this time.
STEP 8
Hold the shelf (H) to the pole (C). Place the
mounting bracket (I) over the screw heads,
then tighten with the 5mm Allen wrench (S).
Adjust as desired.

LAST UPDATED: 07/09/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303