Vivo MOUNT-PC01D User manual

Under Desk Slider PC Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-pc01d
SKU: MOUNT-PC01D
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Slider Track
B(x1)
CPU Holder
C(x4)
Spacer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
Drill
D(x4)
Screw
E(x6)
Screw
F (x12)
Rubber Pad
G(x1)
Allen Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Insert screws (D) and spacers (C) into one end of slider track (A).
STEP 2
Position slider track (A) on underside of desktop and mark drilling locations with a pencil. Insert
screws (E) in le-front and right-rear holes, leaving 3mm of thread exposed. Place keyholes in slider
track (A) over screws (E) and slide into position, then tighten screws (E).
A
D
C
E
3mm
E

4
STEP 3
Apply adhesive so pads (F) on the CPU holder (B).

5
STEP 4
Remove knob from CPU holder (B), and loosen screw with Allen wrench (G).
Adjust height and width of CPU holder (B) to fit your computer tower, then install knob and tighten
previously loosened screw.
G
4mm
B
B
b
b c
c

6
STEP 5
Slide CPU holder (B) with computer into slide track (A).

7
STEP 6
Insert screws (D) and spacers (C) into open end of slider track (A).
D
C
A
A

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303