Vivo DESK-AC36MH User manual

Clamp-on Under Desk Mesh Cable Management
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-ac36mh
SKU: DESK-AC36MH
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1
WARNING!
B (x4)
Connector
E (x2)
Clamp
F (x5)
Velcro Cable Ties
A (x6)
Support Bar
Attach Connectors (B) to the ends of two Support Bars (A).
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
C (x1)
Mesh Panel
D (x2)
Hook
B
A
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 11lbs
(5kg)

3
STEP 2
Feed assembled Support Bars (A)
through middle holes of Mesh Panel
(C), then slide them to the right.
Insert Support Bars (A) into
the middle holes of Mesh Panel
(C), then slide them to the le
and attach to existing le side
Connectors (B).
Feed Support Bars (A) into
middle hole from le side and
push all the way to the right;
connect to existing right side
Connectors (B) of installed
Support Bar (A).
1
2
3
A
B
A
A
C
B

4
STEP 3
Loosen Clamp (E) hand crank to lower Plastic Screwhead (E1). Slide Hook (D) through back of
Clamp (E), with teeth facing up and keyhole in front.
Aligh Hook (D) keyhole over Plastic Screwhead (E1) and slide all the way back so that the Hook is
secure in place.
ED
E1
E1
D

5
STEP 4
Place Clamps (E) onto desktop and being to tighten. Leave a small gap of space between Hooks (D)
and the desktop to ensure the mesh assembly can be properly secured.
D

6
STEP 5
Place mesh assembly onto front teeth of Hooks (D) and tigten Clamps (E) to secure.
D
E

7
STEP 6
Pull lower portion of mesh assembly back and secure into back slots of Hooks (D). Use Velcro Cable Ties
(F) to secure cable bundles and place onto mesh assembly.
F
D

LAST UPDATED: 10/06/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303