Vivo STAND-V006F User manual

Hex Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v006f
SKU: STAND-V006F
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Pole
B(x1)
Base
C1 (x4)
VESA Plate
(Side)
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
C2 (x2)
VESA Plate
(Center)
D (x4)
Curved Arm
E (x2)
Arm Connect
Bracket
F (x2)
Pole Mount
Bracket
G (x8)
M6x25
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
H (x8)
M6 Washer
I(x4)
Arm Cap
J(x3)
M6x29
K (x1)
Decorative Cover
L (x1)
Allen Wrench
Set
M (x48)
M4 Washer
N(x24)
M4x12 Thumb Bolt
P(x24)
M4 Spacer
O (x24)
M8x10
R (x4)
Wire Clip
Q (x4)
M8x10
S(x4)
M4x16 with
Washer

3
ASSEMBLY STEPS
TOOLS NEEDED
Phillips
Screwdriver
STEP 1
Install the pole (A) to the weighted base (B) using M6x29 bolts (J). Tighten with a Phillips screwdriver
and install decorative cover (K).
22 lbs
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
a
b
k
j

4
STEP 2
Assemble the curved arms (D) and arm connect brackets (E) to pole mount brackets (F) using M6x25
bolts (G) and M6 washers (H). Tighten with the medium Allen wrench (L). Carefully slide assembled
monitor arms down onto the pole, making sure center monitor hooks on arm connect brackets are
facing up, and secure with M8x10 bolts (Q) using the medium Allen wrench (L). Attach the wire clips
(R) to the monitor arms.
d
ghe
f
q
r

5
STEP 3
OPTION A: Flat Back Monitor
Attach the VESA brackets (C1, C2) to the monitors using M4x12 thumb bolts (N) with M4 washers (M).
NOTE: Hand tighten screws to avoid stripping the plastic screw heads.
OPTION B: Curved Back Monitor
Attach the VESA brackets (C1, C2) to the monitors using M4 spacers (P) and M4x30 bolts (O) with M4
washers (M). Tighten with a Phillips screwdriver.
m
n
p
m
o
m

6
STEP 4
Hang the center monitors onto the hooks of arm connect brackets. Secure with the M4x16 bolts with
washers (S) and tighten with a Phillips screwdriver. Slide the side monitors onto the curved arms and
tighten knobs. Press arm caps (I) onto ends of curved arms.
Tighten the grub screw on the back of each monitor joint using the small Allen wrench (L) to fix tilt
angle of monitors.
c2
s
i
c1
Plasti c Knob
c1
gru b screw

7
STEP 5
To adjust monitor height, slightly loosen the M4x16 bolts on the sides of each bracket and turn the
screw on top using a Phillips screwdriver. Tighten the M4x16 bolts aer adjustment.
Bolt
Manage cables using the wire clips. Remove the split cap from the pole and feed cables through,
pulling ends out from the opening in back. Replace the split cap when finished.

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303