Vivo STAND V011 User manual

1
Single Monitor Extra Tall
Desk Mount
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: STAND V011
Scan the QR code with your mobile device or follow the link to
helpful videos and specifications related to this product.
Tools Required:
phillips screwdriver
Package Contents
- -htt s://vivo us.com/ roducts/stand v011
A (x1)
Pole Set
B (x1)
Clam
C (x1)
Clam Brace
D (x1)
Swivel Arm
E (x1)
VESA Plate
F (x3)
M5x14 Bolt
H (x1)
Nut
J (x1)
Su ort Plate
K (x1)
M10 Washer
G (x2)
M8x12 Bolt
I (x1)
M10 Bolt
L (x1)
S ring Washer
M (x1)
Grommet Base
Plate
-N 1 (x3)
Wire Cli
O (x1)
Allen Key
P (x1)
Wrench
Q (x4)
M4x12 Thumb Bolt
R (x4)
M4x30 Bolt
S (x4)
M4 S acer
-N 2 (x2)
Wire Cli
- T 1 (x1)
Soft Pad
- T 2 (x1)
Soft Pad

2
Assembly Ste s
Assemble the Pole Set
Remove the grub screws with
provided Allen key (O).
Connect the poles (A) by threads.
Install the previously removed
grub screws and fasten them with
the Allen key (O).
Ste 1: Install the Pole to the Deskto
Install the clamp brace (C) to the pole (A) using 3pcs M x14 bolts (F).
Attach soft pad (T-1) to the clamp brace (C).
O tion A: Desk Clam Install
For self-drilled grommet installation drill a 3/8” (10mm) hole
through the mounting surface. Install using Option B instructions.
A
C
F-T 1
G
O
B
Plastic knob
Note:
Install the clamp (B) to the pole assembly according to the thickness
of the desktop. The thickness can be changed to three positions.
Connect it using 2 M8x12 bolts (G), and tighten using the Allen key
(O). Tighten the clamp to the desktop using the plastic knob.

3
M
A
F-T 2
J
K
I
L
If the existing grommet hole comes with a plastic protector, remove
it to ensure a flat surface before installing the desk mount.
Install the grommet base plate (M) to the pole (A) using 3pcs M x14
bolts (F). Attach soft pad (T-2) to the grommet base plate (M).
O tion B: Grommet Base Install
Position the pole (A) on the mounting surface and secure using the
support plate (J), M10 washer (K), spring washer (L) and M10 bolt (I).
Fasten the M10 bolt using provided wrench (P).
Ste 3: Attach the VESA Plate to the Monitor
For Monitor with Flat Back For Monitor with Curved or
Recessed Back
Note: Hand tighten screws to avoid over tightening.
QS
R
Ste 2: Install Arm to the Pole
D
-N 2 O-N 1
Install the swivel arm (D) to the pole (A). Fasten the bolt with the
supplied Allen key (O). Attach the wire clip (N-1, N-2) to the pole (A)
and swivel arm (D).

4
If you do not understand these directions, or if you have
any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are
no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual.
We cannot be liable for damage or injury caused by
incorrect assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please
contact us. We are happy to replace parts to ensure you
have a fully functional product.
Safety Warning
Contact us at
Last updated: 4/27/2018
Ste 6: Manage Cables and Store Allen Keys
Use wire clips (N1, N2) to
manage cables. Store
Allen Keys (O) in wire clip
(N1) for future
adjustments.
Ste 5: Make Necessary Adjustments
Tighten the bolt with the supplied
Allen key (O) to fix the tilt angle.
Use the supplied Allen key (O) to
make the necessary adjustments.
O
O
Ste 4: Slide Monitor on to Swivel Arm
Slide the monitor onto the head
of swivel arm (D) as shown in the
above diagram.
Install the security nut (H). Make
sure the security nut is installed
before you rotate the monitor.
H