Vivo STAND-SP03B User manual

Speaker Stand for Surround Sound Speakers - 2 Pack
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-sp03b
SKU: STAND-SP03B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A (x4)
Bottom Pole
B(x4)
Top Pole
C(x2)
Base
S-A (x8)
M6x30mm Screw
S-B (x8)
M6x15mm Screw
S-D (x16)
M6 Nut
S-C (x8)
M6x25
T-A (x1)
4mm Allen Key
44lbs
(19.96kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF SPEAKER OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
D(x2)
Shelf
E(x8)
Pad

3
ASSEMBLY STEPS
STEP 1 STEP 2
Thread Top Poles (B) onto
Bottom Poles (A). Secure the
pole assemblies to Bases (C)
using M6x25mm Screws (S-C)
and 4mm Allen Wrench (T-A).
Assemble Shelves (D) to Top
Poles (B) using bolts M6x25mm
Screws (S-C) and 4mm Allen
Wrench (T-A).
Thread M6x15mm Screws (S-B)
into Shelves (D), and secure
with M6 Nuts (S-D).
STEP 3
STEP 4
OPTION A
Thread M6x30mm Screws (S-A) into Base (C), and
secure with M6 Nuts (S-D).
NOTE: Floor M6x15mm Screws (S-B) can be
adjusted to level the stand.
OPTION B
Remove adhesive backing from Pads (E) and
place them in the corners of Base (C).
B
A
C
S-C T-A
D
B
S-C
T-A S-B
D
S-D
S-A
C
S-D
E
C

LAST UPDATED: 06/14/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303