Vivo STAND-PRO1 User manual

22lbs
Portable Tripod Device Stand
[email protected]
STAND-PRO1
Assembly Instructions

• Please be sure you have read and understand all
instrucons prior to installaon.
• Use proper safety equipment during installaon. Install
and operate this product with care.
• Please call a qualied installaon contractor for help if you
do not understand these direcons or have any doubts
about the safety of the installaon.
UNPACKING INSTRUCTIONS
• Carefully open the carton. Remove contents and lay out on
cardboard or other protecve surface to avoid damage.
• Check package contents against the Supplied Parts List on
the next page to assure that all components were
received.
• Check parts for any damage or defects. Do not use
damaged or defecve parts.
IMPORTANT SAFETY INFORMATION
Questions or concerns?
[e-mail]
This product should be assembled with care. If the
tray is not properly installed it may fall, resulting in
possible injury and/or damage.

Supplied Parts Tools
required
Step 1 Unfold tripod base and tighten lower knob.

Step 2 Adjust the pole to the desired height. Insert
retainer pin, and tighten upper knob.
Step 3 Install mounting bracket using the thumbscrew
provided

Step 4 Attach tray to mounting bracket using nuts and
bolts provided.
Still need help?
Please contact us at:
[e-mail]

For more VIVO products please visit us at:
WWW.VIVO-US.COM