Vivotek AO-20W User manual

1
User Manual
VIVOTEK Wiegand Converter
AO-20W (900061700G)

2
Table of Contents
Overview ................................................................................................................... 3
Scenario description ............................................................................................. 3
System Deployment .............................................................................................. 3
Configuration in ANPR software ....................................................................... 4
How to configure mapping list ...................................................................... 4
Configure VIVOTEK Wiegand converter settings in ANPR service ... 7
Configuration in VIVOTEK Wiegand converter management tool ........ 8

3
Overview
Wiegand protocol is commonly used in traditional access control
system and users can acquire access using a badge with valid
Wiegand ID numbers. VIVOTEK’s LPR cameras, with the onboard
ANPR software, can match a license plate number to a specific
Wiegand ID number using a Wiegand converter. The Wiegand
converter can convert the Ethernet signal to Wiegand output signal
(Data 0, Data 1) so that an easy integration is possible with existing
access control systems.
Using the VIVOTEK ANPR software, you can easily configure the
mapping list to link plate number to a specific ID number, and
configure different actions in individual user groups.
Scenario description
System Deployment

4
Configuration in the ANPR software
l How to configure a mapping list
1. Click the “List” tab on the top menu.
2. You can see different types of lists that you can edit. You can also
create your own list by clicking the “+” icon.
3. Click the list you would like to configure. You will see the “list of
license plates” and the “action for the list”.

5
4. Adding a new plate number to a specific list. You can click “+” icon
to add a new plate number,
u Plate: The plate numbers you would like to add to this specific
list, for example, ABC321, please remove the dash “-” in the plate
number.
u Description: #ID Card Number#. In this column, you can enter
the Facility Code and “.” and Card Number, or you can enter a
Full Card Number, either way will work.
u Insert date: System will fill this column automatically.
u Start validity date: you can click the calendar icon to select the
date you would like to add.
u End validity date: you can click the calendar icon to select the
date you would like to add.

6
Please do not forget to click the “Save” button, when you complete
the configuration. You can also edit or delete any plate number using
the “edit” or “delete” buttons.
5. Adding action to the group.
Click the “+” icon, you can fill in any information on description column,
and select “Wiegan Vivotek” on the action type column.
Select “Enabled” on the active column.

7
Please do not forget to click the “Save” button, when you are
completing the configuration. You can also edit or delete the action,
using the “edit” or “delete” buttons.
l Configure VIVOTEK Wiegand converter settings in
ANPR service
Click “Wiegand Vivotek” on the action type column to show the
“Action properties,” and configure the converter information to ANPR
service so that ANPR service is able to find the VIVOTEK Wiegand
Converter and know the output format and output bit length it should
use to send to the converter.

8
Configuration in the VIVOTEK Wiegand Converter
management tool
1. Connect the device to a computer, then open a Web Browser and
enter "http://192.168.1.127" on IP address field to start a web console.
This is the default IP. You may have to configure your PC IP to
192.168.1.x.
2. On the web console, you will see the current state page.
3. The tool would ask you to login, the default user name is SuperAdm
and password is 721568.

9
4. Click on “Network Setting” on the Main Menu to configure a new IP
address. You can enter the new IP address, LAN Net Mask and
Default Gateway and click the “Update” button to save the new
settings.
5. Click on “User Password” on the main menu to change the
password.