Volt VPL-1043-4-BBK User manual

INSTALLATION INSTRUCTIONS
VOLT®LOW VOLTAGE LANDSCAPE LIGHTING
VOLT® Wide Modernelle Brass Path & Area Light
ITEM: VPL-1043-4-BBK
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT®- Wide Modernelle Brass Path & Area Light - VPL-1043-4-BBK
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ BEFORE INSTALLATION
!
IMPORTANT SAFETY INSTRUCTIONS
!
This luminaire is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and instruc-
tions may result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, operation
maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. Warning: risk of electrical shock. Install all luminaires 10 feet (3.05M) or
more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply (transform-
er) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that are
suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is located within
6 inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before reducing lamp.
2. Lamp gets HOT quickly!
3. Do not touch the hot lens, guard or cowl.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time.
6. Use a soft cloth.
7. Oil from skin may damage lamp.
8. Do not operate the xture with a damaged or missing lens or shield.
813.978.3700 • [email protected] • www.voltlighting.com
2

PACKAGE CONTENTS
PARTS REQUIRED (SOLD SEPARATELY)
A. (1) Fixture Body
813.978.3700 • [email protected] • www.voltlighting.com
3
PRODUCT DIMENSIONS
A. (1) G4 Bi-Pin
22”
6”2”
1”

REMOVE LENS
1
Install G4 Bulb
2
813.978.3700 • [email protected] • www.voltlighting.com
4
Remove the lens from the
xture by loosening the
screws.
Fixture
Lens
Screw
Insert the Bi-Pin with
correct wattage and type
marked on xture label and
push into place.
CAUTION: Do not exceed
maximum wattage marked
on luminaire label.
NOTE: DO NOT touch bulb
with bare hands. Use soft
cloth to handle bulb.
Socket
Bi-Pin
VOLT®- Wide Modernelle Brass Path & Area Light - VPL-1043-4-BBK
INSTALLATION INSTRUCTIONS

Install Lens
3
Install Stake
4
813.978.3700 • [email protected] • www.voltlighting.com
5
Place the lens back onto
the xture and secure with
the previously removed
screws. Tighten until snug.
Fixture
Lens
Screw
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until ange of stake is
ush to grade. To avoid damage
to the stake, place a board on top
of the stake while hammering.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Board
GroundSoil
Stake