Volt Stemless VPL-1053 User manual

VOLT®LOW VOLTAGE LANDSCAPE LIGHTING
V O LT ® Stemless Brass Bronze Directional Path Light
ITEM: VPL-1053
INSTALLATION INSTRUCTIONS
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

V O LT ® Stemless Brass Bronze Directional Path Light - VPL-1053
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ BEFORE INSTALLATION
!
IMPORTANT SAFETY INSTRUCTIONS
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation, operation
maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or
more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that are
suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is located within
6 inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before reducing lamp.
2. Lamp gets HOT quickly!
3. Do not touch the hot lens, guard or cowl.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time.
6. Use a soft cloth.
7. Oil from skin may damage lamp.
8. Do not operate the xture with a damaged or missing lens or shield.
813.978.3700 • [email protected] • www.voltlighting.com
2

PACKAGE CONTENTS
REMOVE SHADE
1
813.978.3700 • [email protected] • www.voltlighting.com
3
PRODUCT DIMENSIONS
Parts Required (Sold Separately)
A. (1) Fixture Body
B. (1) Mounting Bracket
C. (3) Anchors
D. (3) Screws
E. (1) Coupling
A. Mounting Accessory
B. (1) G4 Bulb
2.71”
2.58”
1.96”
Remove the shade from the
xture body by removing the
screw on the bottom.
Fixture Body
Screw
Shade

INSTALL G4 BULB
2
INSTALL THE SHADE
3
V O LT ® Stemless Brass Bronze Directional Path Light - VPL-1053
INSTALLATION INSTRUCTIONS
813.978.3700 • [email protected] • www.voltlighting.com
4
Insert G4 bulb into the socket
properly with the correct wattage
and type marked on the xture
label.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
Socket G4 Bi-Pin Bulb
Two installation methods are available for this product
(Mounting Option A & B). Refer to respective installation
instructions and then continue to Step 4 for wire connections.
Install the shade back onto
the xture body and secure
with previously removed
screw. Hand tighten until
snug.
Fixture Body
Screw
Shade

Install Mounting Bracket
1
813.978.3700 • [email protected] • www.voltlighting.com
5
Mounting Option A: Surface Mount
1. Attach the mounting
bracket to your desired
mounting surface. Use a
pencil, mark 3 points on
the mounting surface from
3 holes on the mounting
bracket.
2. Set the mounting bracket
aside and drill 1/4” holes on
the marks on the mounting
surface.
3. Insert anchors into the
drilled holes completely.
4. Attach the mounting
bracket onto the mounting
surface and secure with
screws. Hand tighten until
snug with screwdrivers.
WALL
Mark Hole
Anchor
Mounting
Screw
2
Install Fixture Body to Mounting Bracket
Lay the supply cable into
the wireway slot on the
mounting bracket. Align two
screw heads on the bottom
of the xture body to the
keyholes on the mounting
bracket. Push the xture
body onto the mounting
bracket and rotate it until it
is locked into place
Go to Step 4 for wire
connections.
ROTATE
WALL
Supply Cable
Wireway Slot
Fixture Body
Screw Head
Mounting Bracket
Key Hole

Install Stake Into Soil
2
V O LT ® Stemless Brass Bronze Directional Path Light - VPL-1053
INSTALLATION INSTRUCTIONS
813.978.3700 • [email protected] • www.voltlighting.com
6
813.978.3700 • [e-mail] • www.voltlighting.com
Mounting Option B: Stake Mount
Install Stake to Fixture Body
1
Pass supply cables through
the coupling and the stake.
Thread the coupling and
the stake to the xture body
and hand tighten until snug.
Fixture
Supply Cable
Coupling
Stake
Clear away an area in the
ground at the wireway slot.
Lay the supply cables into the
wireway slot and insert the
stake into the soil until ange
of stake is ush to ground.
Go to Step 4 for wire
connections.
Supply Cable
Ground
Stake
Soil
Fixture

813.978.3700 • [email protected] • www.voltlighting.com
6
WIRE CONNECTIONS
4
813.978.3700 • [email protected] • www.voltlighting.com
7
Strip both leads from the luminaire pigtail. Using two UL listed wire
connectors (sold separately), connect the leads from the luminaire to
the main supply cable leads.
Wire Connectors
Supply Cable
Pigtail
Main Supply Cable
Install/Replace Lamp
Remove the xture body from the mounting bracket or the stake
rst. Reverse Step 1 - Step 3 to expose the G4 bulb and replace it
with the correct wattage and type marked on the xture label.
Then, reinstall the shade and xture body.
IMPORTANT: G4 Bi-pin bulb must be protected from moisture
and dust at all times. Always reinstall the shade when removed.

Specications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • www.voltlighting.com
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)