VooPoo REX User manual

3GT[GR/TYZX[IZOUT

Seven Security Protection :
- Overtime protection
- Over temperature protection
- Output over-current protection
- Overcharge protection
- Low battery protection
- Atomizer short-circuit protection
- Battery anti-reverse protection

Parameters :
Size : 88 x 38 x 24mm
Power Output : 5-80W
Battery : Single Battery,18650 x 1
Resistance Range :
1RQ7&ZLUHȍ（±5%）
7&ZLUHȍ（±5%）
Program upgradable ：YES
Product description :
1. Appearance & Main Parameters:

2.Electric Parameter :

Instructions :
1. Basic Operation
①. Turn ON / OFF: Press fire button 5 times
Switch Mode: Press fire button 3 times
②. Enter the function Menu interface: Press “+” and “-”
③. LOCK/UNLOCK: Press Fire button and “+”
④. Switch screen orientation: Press Fire button and “-”
①
④
③
②

b). Press up and down buttons at the same
time，enter the function Menu interface：
a). Boot default , Press up or down button
to select the three options .
a). Adjust the wattage from 5W to 80W, The
product automatically recommends the
output wattage according to the resistance
of the atomizer when it detects that a new
atomizer has been attached.

a). Support SS, Ni, Ti, NC, TC, 5 kinds of
heating wire, factory default SS, Ni, Ti,
Connect computer APP to open NC, TC；
- When the temperature setting is at 100℃,
keep pressing “-”, it will turn to be 600℉;
- When the temperature setting is at 200℉,
keep pressing “-”, it will turn to be 315°C.
b). To adjust wattage while in TC Mode, press
fire button 4 times rapidly to activate
wattage adjustment. You will see the “W”
wattage icon flashing. The wattage can be
adjusted from 5W to 80W.
c). Press “+” and “-”at the same time，Enter
the function Menu interface：

- Press “+” and “-”at the same time，Enter
the function Menu interface , select ，
Switch M1 to M5；
- Press fire button 4 times，Switch ：FIT
PRGHĺ3RZHUFXVWRPL]DWLRQ:ĺ7&
FXVWRPL]DWLRQ661L7L；