VTech Baby Toot-Toot Animals Thee House User manual

User’s Manual
© 2014 VTech
Printed in China
91-002932-000 UK
Tree House

2
INTRODUCTION
Thank you for purchasing the VTech®Toot-Toot Animals Tree House
learning toy!
Explore the Toot-Toot Animals Tree House by VTech®. Learn about
animals, colours and more with the included SmartPoint™ Toot-Toot
Animals panda. Ride the lift to the top of the tree house, then take a ride
down the slide! For added fun, you can connect this play set to other
Toot-TootAnimals and Toot-Toot Drivers play sets (each sold separately).
Please note SmartPoint responses may vary.
Introduction
Panda
Three Shape Sorter Pieces
Swing
Turning
Telescope
Platform
Tree House
Shape Sorter
Six Smartpointtm
Locations
Lift Basket
Launcher

3
Included In This Package
INCLUDED IN THIS PACKAGE
One tree house
shape sorter
One lift basket bracket
with hand crank
One SmartPoint™
launcher
One SmartPoint™
lift basket
One treetop
platform
One welcome sign
One 90 degree
track, female
One SmartPoint™
straight track
One 90 degree
track, male
One SmartPoint™
entrance track
One tree base One entrance piece

4
Included In This Package
One tree trunk
with track
Four screws
One VTech®Toot-Toot
Animals panda
One turning SmartPoint™
telescope platform
One swing bracket
One shape sorter
container
Three shape
sorter pieces
One sheet of labels
Two spiral
ramp pieces
One SmartPoint™
swing

5
Please stick the labels to the play set securely
as indicated below:
Label Instructions
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
NOTE: Please keep user’s manual as it contains important
information.
1
1
2
2
3
3
4
4

6
GETTING STARTED
BATTERY INSTALLATION - PANDA
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the panda. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AAA’ (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc)orrechargeable(Ni-Cd,Ni-MH),ornewandusedbatteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started

7
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specied value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com
ASSEMBLY INSTRUCTIONS
With the VTech® Toot-Toot Animals
Tree House,safetycomes
first.Toensureyourchild’ssafety,adultassemblyisrequired.
1. Attach the tree trunk with track to the
tree base as shown. You will hear a
click sound to indicate the track is
secure.
Assembly Instructions

8
2. Attach the treetop platform to the tree
trunk with track. You will hear a click
sound to indicate the track is secure.
3. Attach the SmartPoint™ launcher to
the treetop platform as shown. You
will hear a click sound to indicate the
track is secure.
4. Attach the lift basket bracket to the
SmartPoint™ lift. You will hear
a click sound to indicate the lift
basket is secure. Once the bracket is
connected to the lift basket, it cannot
be detached.
5. Place the lift basket with hand crank
on the treetop platform as shown,
and fasten it with the four screws
provided.
6. Attach the tree house shape sorter
to the treetop platform. You will hear
a click sound to indicate the treetop
platform is secure. Once the tree
house shape sorter is connected
to the treetop platform, it cannot be
detached.
Assembly Instructions

9
7. Attach the swing bracket to the
SmartPoint™ swing. You will hear
a click sound to indicate the track is
secure. Once the bracket is connected
to the SmartPoint™ swing, it cannot
be detached.
8. Attach the swing bracket to the tree
house shape sorter as shown. You
will hear a click sound to indicate the
swing is secure.
9. Attach the SmartPoint™ turning
telescope platform to the tree house
shape sorter. You will hear a click
sound to indicate the telescope
platform is secure.
10. Connect the shape sorter container
to the tree base.
11. Connect the SmartPoint™ entrance
track to the container as shown.
Assembly Instructions

10
12. Insert the entrance piece to the
SmartPoint™ entrance track.
13. Attach the upper most spiral track
piece to the tree trunk with track and
entrance piece as shown.
14. Connect the two spiral ramp pieces
as shown.
15. Insert the welcome sign into the
bottom most spiral ramp piece as
shown.
16. Once you’ve completed the above
steps, you are ready to play! You
can connect these pieces to the other
included track pieces or you can
connect this play set to other Toot-
Toot Animals and Toot-Toot Drivers
play sets (each sold separately).
Please note SmartPoint responses
may vary.
Assembly Instructions

11
PRODUCT FEATURES – PANDA
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH to the ON ( ) position. To
turn the unit OFF ( ), slide the ON/
OFF SWITCH to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Toot-Toot Animals panda will
automatically power-down after approximately 60 seconds without
input. The unit can only be turned on again by pressing the light-up
button or pushing the panda quickly.
ACTIVITIES – PANDA
1. Slide the ON/OFF SWITCH to the
ON position to turn the unit on. You
will hear a panda sound, a song and
a phrase. The light will ash with the
sounds.
2. Press the LIGHT-UP BUTTON to hear
fun sounds, sing-along songs and
phrases. The light will ash with the
sounds.
3. Push the panda to hear fun sounds and
melodies. While a melody is playing,
push the panda again to add in fun
sounds on top of the melody. The light
will ash with the sounds.
Product Features-Panda/Activities-Panda

12
4. For added fun, the panda interacts
with VTech®Toot-Toot Animals play
sets (each sold separately). Simply roll
the panda over one of the play sets
SmartPoint™ locations to see the light
ash and to hear greetings, fun sounds,
short tunes and sing-along songs.
You can also play with your animal on
Toot-Toot Drivers play sets (each sold
separately). Please note SmartPoint
responses may vary.
ACTIVITES – TREE HOUSE
1. Move the panda or any SmartPoint™
animal (each sold separately) over
the tree house’s six SmartPoint™
locations to trigger fun sounds, songs,
or phrases.
2. Lift the panda to the top of the tree on
the lift basket by turning the lift handle.
3. To launch the pan da down t he
spiral track, place the panda on the
LAUNCHER at the top of the treetop
platform. Lift up the LAUNCHER to see
the panda slide down.
Activities-Tree House

13
4. Rotate the SmartPoint™ telescope
platform for the animals to enjoy great
views.
5. Insert the shape sorter pieces into
the tree house shape sorter’s correct
locations.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
Care & Maintenance

14
Troubleshooting
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or [phone] (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the value of our
products. However, errors sometimes can occur. It is important for
you to know that we stand behind our products and encourage you
to call our Consumer Services Department on 01235 546810 (from
UK) or [phone] (outside UK), with any problems and/or
suggestions that you might have. A service representative will be
happy to help you.

15