VTech Baby Peek-a-Boo-Bear Assembly Instructions

Parent's Guide
Peek-a-Boo-Bear
91-003764-001 UK

3
3
3
INTRODUCTION
Introducing the Peek-a-Boo Bear by VTech®! Baby will get a lovely
surprise when they press one of the two learning buttons on the
honey pot, as a friendly fabric bear will pop up to play hide and seek!
The buttons also play exciting music, catchy songs and fun phrases
which support and encourage language development.
Soft Peek-a-Boo Bear
On/Off/Volume
Switch
Music Button
Spinner
Bee Slider
Number Button
Light Up
Music Note

4
4
4
INCLUDED IN THIS PACKAGE
• One Peek-a-Boo-Bear
• One Parent`s Guide
WARNING: All packing materials, such as tape, plastic
sheets, packaging locks, removable tags,
cable ties and packaging screws are not part
of this toy and should be discarded for your
child’s safety.
NOTE: Please keep this Parent`s Guide as it contains
important information.
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on
the back of the unit and use a
screwdriver to loosen the screw
and open the battery cover.
3. If used or spent batteries are
present, remove these batteries
from the unit by pulling up on one
end of each battery.
Unlock the packaging locks:
Rotate the packing locks
90 degrees anticlockwise
Pull out the packing locks

5
5
5
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram
inside the battery box. (The use of new alkaline batteries is
recommended for maximum performance).
5. Replace the battery cover and tighten the screw to secure the
battery cover.
BATTERY NOTICE
• Use new alkaline batteries or fully charged NI-MH (Nickel
Metal-hydride) rechargeable batteries for best performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

6
6
6
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates
they must not be disposed of in domestic waste as
they contain substances that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the
specified value of mercury (Hg), cadmium (Cd) or lead
(Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on
the market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com
PRODUCT FEATURES
1. On/Off/Volume Switch
To turn the unit On, slide the On/Off/
Volume Switch to the Low Volume
or the High Volume position.
You will hear a cute song and
phrase. To turn the unit Off, slide the
On/Off/Volume Switch to the Off
position.
2. Automatic Shut Off
To preserve battery life, the Peek-a-Boo-Bear will automatically
shut off after approximately 50 seconds without input. The unit
can be turned on again by pressing any button.
NOTE: If the unit powers down during play, we suggest changing
the batteries.

7
7
7
ACTIVITIES
1. Number Button
When the bear is hiding in the pot,
press the Number Button to pop
up the bear, hear playful peek-a-
boo phrases and to learn numbers.
If the bear is popped up, press the
Number Button to hear a cute
phrase about the bear. The light will
flash with the sounds.
2. Music Button
Press the Music Button to hear
one of three songs and a variety of
melodies. If the bear is hiding in the
pot, pressing the Music Button will
pop up the bear. The light will flash
with the sounds.
3. Hiding Bear
When the soft bear is popped up,
press him down so he is hiding in the
pot ready to play peek-a-boo. The
bear will respond with fun phrases
and a playful song. The light will flash
with the sounds.
4. Bee Slider
Pull down on the Bee Slider to spin
the spinner and hear phrases about
the bees, playful sounds and music.
The light will flash with the sounds.

8
8
8
SONG LYRICS
Song 1
I'm hiding, are you too?
Pop up so I can see you.
Peek-a-boo, peek-a-boo.
Song 2
Honey is so yummy, in my little tummy,
It's tasty and sweet, my special little treat!
Song 3
Circle, triangle, heart and square,
doo-dah, doo-dah!
Look around and you will see,
Shapes are hiding everywhere!
MELODY LIST
1. There is a Tavern in the Town
2. Teddy Bear's Picnic
3. Hokey Cokey
4. Pop! Goes the Weasel
5. BINGO
6. Alphabet Song
7. Flight of the Bumblebee
8. Au Clair De La Lune
9. Skip to My Lou
10. Toyland
11. Polly Wolly Doodle
12. Here We Go Round the Mulberry Bush
13. Oh Susanna
14. Hickory, Dickory Dock
15. Animal Fair

9
9
9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose the
unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working or
malfunctions, please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit sit for a few minutes, then replace the batteries.
4. Turn the unit ON.The unit should now be ready to play with
again.
5. If the product still does not work, install a brand new set of
batteries.
If the problem persists, please contact our Consumer Services
Department and a service representative will be happy to help you.
CONSUMER SERVICES
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make every
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.

1010
10
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.vtech.com.au
NZ Customers:
Phone: [phone]
Website: support.vtech.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to vtech.com.au/
consumerguarantees for further information.

TM & © 2019 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003764-001UK
Visit our website for more
information about our products,
downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au