Vulcan-Hart VELT20 User manual

Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
A2780
ISO9001
Vulcan-Hart Co.
F-31644 (10-03)
SPECIFICATIONS:
Electric, self-contained, stainless steel, 2/3jacketed floor mounted
tilting steam kettle, Vulcan-Hart Model No. ___________. Fully
welded hemispheric bottom kettle with type 304 stainless steel
jacket and lining (316 stainless steel liner, 20, 30 & 40 gallon).
Jacket tested to 50 psi (3.4 kg/cm2). Stainless steel enclosure for
self locking tilt mechanism. Kettle tilts forward 90° to completely
empty. Tubular stainless steel legs with flanged feet. Controls
enclosed in stainless steel housing include a power switch,
thermostat, power "on" light, vacuum/pressure gauge, pressure
relief valve and low water signal light. Elements are field replace-
able. Requires 208 or 240 volts, 60 Hz, 3 phase.
NSF listed. U L listed. Meets ASME code.
VELT SERIES
ELECTRIC FLOOR MOUNTED
TILTING 2/3JACKETED KETTLE
MODELS: VELT SERIES Electric Floor Mounted Tilting 2/3Jacketed Kettle
■■VELT20 12 KW, 20 gallon capacity
■■VELT30 15 KW, 30 gallon capacity
■■VELT40 18 KW, 40 gallon capacity
■■VELT60 18 KW, 60 gallon capacity
■■VELT80 18 KW, 80 gallon capacity
■■VELT100 24 KW, 100 gallon capacity
STANDARD FEATURES
■Electric, self-contained stainless steel, 2/3jacketed floor
mounted tilting steam kettle.
■Fully welded hemispheric bottom kettle with type
304 stainless steel jacket and lining. (316 stainless steel liner
for 20, 30 & 40 gallon models.)
■Stainless steel enclosure for self locking tilt mechanism.
■Kettle tilts forward 90° to completely empty.
■Tubular stainless steel legs with flanged feet.
■Faucet bracket.
■Controls enclosed in stainless steel housing include a power
switch,thermostat,power"on"light,vacuum/pressuregauge,
pressure relief valve and low water signal light.
■Elements are field replaceable.
■Requires 208 or 240 volts, 60 Hz, 3 phase.
■One year limited parts and labor warranty.
OPTIONS
■■Spring assist cover (20 - 40 gallon).
■■2" compression draw-off valve with perforated strainer.
■■3" compression draw-off valve with perforated strainer.
■■Correction facility package:
a. Security type tamper resistant fasteners with tack welds.
b. Controls protected by lockable cover.
c. Stainless steel step cover over draw-off valve with chain.
d. Type 316 liner (60 - 100 gallon).
■■Stainless steel receiving pan support.
■■Single phase, 12 or 15 KW.
■■24 KW elements (40, 60 & 80 gallon models only).
■■33 KW (60, 80 & 100 gallon models only).
■■480 volts, 60 Hz, 3 phase.
■■Second year extended limited parts and labor warranty.
ACCESSORIES
■■Lift-off cover.
■■Contour measuring strip.
■■Perforated stainless steel basket assembly (single - 20 gal.)
(triple - 20 through 100 gallon).
■■Clean-up kit, includes draw-off brush with 36" handle and
paddle scraper with 40" handle.
■■Stainless steel 48" whip.
■■Solid disk.
■■18" double jointed single pantry faucet.
■■18" double jointed double pantry faucet.
■■Double pantry washdown hose with 16" add-on faucet with
backflow preventer.
■■Double pantry washdown hose with backflow preventer.
■■Double pantry pot filler with backflow preventer.

Printed On Recycled Paper
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-31644 (10-03)
AMPS PER LINE
MODEL KW PHASE 208V 220V 240V 380V 415V 480V
VELT20 12 1 57.7 54.5 50.0 — — —
12 3 33.3 31.5 28.9 18.2 16.7 14.4
VELT30 15 1 72.1 68.2 62.5 — — —
15 3 41.6 39.4 36.1 22.8 20.9 18
VELT40, 60, 80 18 3 50 47.2 43.3 27.3 25 21.7
VELT100 24 3 66.6 63.0 57.7 36.5 33.4 28.9
VELT SERIES
ELECTRIC FLOOR MOUNTED
TILTING 2⁄3JACKETED KETTLE
NOTE:
• Dimensions which locate the above connections have a tolerance of +
or -3" (+ or -75 mm).
• Installation of backflow preventers, vacuum breakers and other spe-
cific code requirements is the responsibility of the owner and installer.
It is the responsibility of the owner and installer to comply with local
codes.
• Plastic drains are not recommended due to inherent limited tempera-
tures of the plastic. Boiler purge temperatures may exceed 180°F. The
installer may be required to provide means to reduce boiler purge
water temperature to be that of the condensate temperature of 140°F
or less.
• This appliance is manufactured for commercial installation only and is
not intended for home use.
SERVICE CONNECTIONS:
Electric Connection: To be as specified on data plate.
BRIMFUL CAPACITIES (in 4 oz. servings):
Working capacity 70% to 80% of brimful depending on model.
80 quarts/20 gallons/76 liters/640 servings
100 quarts/30 gallons/95 liters/800 servings
120 quarts/40 gallons/152 liters/1,280 servings
160 quarts/60 gallons/227 liters/1,920 servings
240 quarts/80 gallons/303 liters/2,560 servings
400 quarts/100 gallons/379 liters/3,200 servings
ELECTRICAL CHARACTERISTICS
MODEL CAP. A B C D E F G H J(2") J(3") K(2") K(3") L M
VELT20 20 gallons 21 18 38 36 15 18 14 19.5 14.75 15.5 18 17.5 - 63.5
76 liters 533 457 965 914 381 457 356 495 375 394 457 445 - 1613
VELT30 30 gallons 24 20 38 39 16.5 19 12.375 22 16.75 17.25 16 15.5 - 66.5
114 liters 610 508 965 990 419 483 314 559 425 438 406 394 - 1689
VELT40 40 gallons 26 22.5 38 41 17.5 23 10 22.5 17.5 18.5 13.5 13 - 68.5
152 liters 660 572 965 1041 445 584 254 572 445 470 343 330 - 1740
VELT60 60 gallons 29.5 26 42 44.5 19.125 24 11 25 19.5 20.75 14 13.5 11 76
227 liters 749 660 1067 1130 4886 610 280 635 495 527 356 343 279 1930
VELT80 80 gallons 33 28 45 48 20.875 27 12.625 25.5 20.25 21.25 15 14.5 24 82.5
303 liters 838 711 1143 1219 530 686 321 648 514 540 381 368 610 2096
VELT100 100 gallons 35.25 29.75 48.75 49.5 22.25 32 14.5 24.5 20.25 21.25 18.75 18.25 28 88.5
379 liters 895 755 1238 1257 565 813 368 622 514 540 476 464 711 2248