Vulcan-Hart 1T4024D User manual

Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
A2780
ISO9001
Vulcan-Hart Co.
F-32385 (2-06)
SPECIFICATIONS:
2/3jacketed direct steam tilting kettle, 40 quart capacity,
Vulcan-Hart Model No. 1T4024D. Steam jacketed kettle
mounted on (18") (28") high base cabinet with stainless steel
frame, front full height door, stainless steel side and alumi-
nized rear panel with 6" adjustable legs with flanged feet for
anchoring. Fully welded hemispheric bottom kettle with type
304 stainless steel jacket and type 316 stainless steel liner.
Jacket tested to 50 psi (3.4 kg/cm2). Requires 22 lbs./hr. of
steam flow at 15 psi at the kettle. 12" single temperature
deck mounted faucet. Includes safety pop-off valve, pressure
reducing valve and steam control valve on right trunnion leg.
Exterior dimensions: 24"w x 35.4"d x (18") (28")h on 6" adjust-
able legs.
Classified by U L to NSF Std. #4. Meets ASME code.
MODEL 1T4024D
40 QUART DIRECT STEAM TILTING
KETTLE ON CABINET BASE
MODEL: 1T4024D 40 Quart Direct Steam Tilting Kettle on Cabinet Base
STANDARD FEATURES
■2/3jacketed direct steam tilting kettle, 40 quart capacity.
■Steam jacketed kettle mounted on (18") (28") high base
cabinet with stainless steel frame, front full height door,
stainless steel side and aluminized rear panel with 6"
adjustable legs with flanged feet for anchoring.
■Fully welded hemispheric bottom kettle with type 304 stain-
less steel jacket and type 316 stainless steel liner. Jacket
tested to 50 psi (3.4 kg/cm2). Requires 22 lbs./hr. steam
flow at 15 psi at the kettle.
■12" single temperature deck mounted faucet.
■Includes safety pop-off valve, pressure reducing valve and
steam control valve on right trunnion leg.
■One year limited parts and labor warranty.
OPTIONS
■■Correction package.
-Cabinet door with hasp (lock by others).
-Security type tamper resistant fasteners.
■■Tilting kettle strainer.
■■Pressure reducing valve if steam supply exceeds 50 psi.
■■12" dual temperature faucet.
■■Mount and interconnect kettle with boiler base at factory.
Includes steam supply piping. Shipped on one skid.
■■Second year extended limited parts and labor warranty.
ACCESSORIES
■■Stainless steel back panel.
■■Lift-off cover.
■■Contour measuring strip.
■■Single perforated stainless steel basket.
■■Ball float trap.
■■Pressure reducing valve.

Printed On Recycled Paper
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]
502-778-2791 QUOTE & ORDER FAX: [phone]
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32385 (2-06)
MODEL 1T4024D
40 QUART DIRECT STEAM TILTING
KETTLE ON CABINET BASE
SERVICE CONNECTIONS:
ASteam Supply Connection: 3/4".
BDrain: Condenser box, compartment and boiler,11/4" NPT. (Provide an
openairgaptypedrainwithin12"ofcondenserboxandforbestresults
at a distance so that steam vapors will not enter the steamer from
underneath the control area. Do not connect solidly to any drain
connection.)
CWater Supply Connection for Kettle Filler Faucet: 1/4" NPT.
NOTE:
•Dimensions which locate the above connections have a tolerance of
+ or -3" (+ or -75 mm).
•Installation of backflow preventers, vacuum breakers and other specific
code requirements is the responsibility of the owner and installer. It is
the responsibility of the owner and installer to comply with local codes.
•Plastic drains are not recommended due to inherent limited tempera-
tures of the plastic. Boiler purge temperatures may exceed 180°F. The
installer may be required to provide means to reduce boiler purge water
temperature to be that of the condensate temperature of 140°F or less.
•This appliance is manufactured for commercial installation only and is
not intended for home use.
DIRECT STEAM DATA:
Steam supply to the kettle must:
1. Maintain a steady 13 psi flow under operating conditions.
2. Have a minimum flow rate of 22 lbs. (0.6 BHP)/hr., dry steam.
3. Be adequately trapped to provide dry steam. (See ball float trap.)
EQUIPMENT CLEARANCE:
Rear: 2" Right: 0" Left: 0"
CAPACITIES (in 4 oz. servings):
40 quarts / 10 gallons / 37.5 liters - 320 servings