W-Link WL-G510 Series User manual

WL-G510 Series Router User Manual
1
V1.0
http://www.wlink-tech.com
March, 2018
User Manual
---Apply to WL-G510 Series Industrial 4G/3G Router
V1.0
http://www.wlink-tech.com
March, 2018

WL-G510 Series Router User Manual
2
Copyright © Shenzhen WLINK Technology Company Limited 2012 ～2018
Without our written approval, anyone can’t extract, copy whole or part of content of this file and can’t spread
out in any format.
Caution
Due to product updates or functional upgrading, we may renew the content of this file, and this file only for
reference. All statement, information, suggestion .etc in this file does not compose any form of guarantee and
we WLINK reserves the right of final explanation.
Shenzhen WLINK Technology Company Limited
Add：
3F, Yiben Building, Chaguang Road, Xili, Nanshan Dist., China, 518000
Web：
http://www.wlink-tech.com
Service Email：
[e-mail]
Tel：
86-755-86089513
Fax：
86-755-26059261

WL-G510 Series Router User Manual
3
Contents
1Hardware Installation..............................................................................................................................................4
1.1 Panel..............................................................................................................................................................4
1.2 LED Status....................................................................................................................................................6
1.3 Dimension.....................................................................................................................................................7
1.4 How to Install................................................................................................................................................7
2Router Configuration............................................................................................................................................ 10
2.1 Local Configure..........................................................................................................................................10
2.2 Status...........................................................................................................................................................11
3.3 WLAN Setting.............................................................................................................................................18
3.4 Advanced Network Setting...................................................................................................................... 21
3.5 Firewall........................................................................................................................................................ 29
3.6 VPN Tunnel................................................................................................................................................ 31
3.7 Administration............................................................................................................................................ 40
3.8 Debugging Setting.....................................................................................................................................52
3.9 “Reset” Button for Restore Factory Setting...........................................................................................55
3.10 Appendix (For advanced optional features only)...............................................................................56

WL-G510 Series Router User Manual
4
1Hardware Installation
This chapter is mainly for installation introduction, there would be some difference between the scheme
and real object. But the difference won’t have any influence to products performance.
1.1 Panel
Table 1-1 WL-G510 Structure
WLINK Tech.
G510 series
Front
Top
There are some difference on Antenna interface and indicator light for the device with extended
Wi-Fi, GPS features.
Table 1-2 Router Interface
Port
Instruction
Remark
USIM
Plug type SIM Slot, support 1.8/3V/5V automatic
detection.

WL-G510 Series Router User Manual
5
Port
Instruction
Remark
Main
LTE antenna, SMA connector, 50Ω.
Aux
LTE MIMO antenna
GPS
GPS antenna, SMA connector, 50Ω.
Wi-Fi1
Wi-Fi dual-band antenna, SMA connector
Wi-Fi2
Wi-Fi dual-band antenna, SMA connector
LAN
10/100/1000Base-TX，MDI/MDIX self-adaption.
WAN/LAN
10/100/1000Base-TX，MDI/MDIX self-adaption.
Default as LAN
Reset
Reset button, (press on button at least 5 seconds)
PWR
Power connector
7.5～32VDC
I/O
DI-1 and DI-2 are digital input, and DO is digital
output.
Console
RJ45-DB9 cable for CLI configuration.

WL-G510 Series Router User Manual
6
1.2 LED Status
Table 1-3 Router LED indictor Status
silk-screen
status
Indication
Signal
Signal
Solid Light
LED1: weak (CSQ0~10).
LED2: good (CSQ11~19)
LED3: strong (CSQ20~31)
Signal 1
Blink
dialing
Solid Light
online
PWR
Solid Light
System power operation.
WLAN
Solid light
WLAN enable, but no data communication.
Blinking quickly
Data in transmitting
Dark
WLAN disable
ERR
Dark
System operation and LTE/3G online.
Solid Light(Red)
System fail indicator. It indicates SIM card/ module
fail.
LAN
Green
Solid light
Connected
Green
Blinking
Data in transmitting.
Green
Dark
Disconnection.
There are some difference in the LED indicator of the router with expanded Wi-Fi, GPS function
and single module dual SIM.

WL-G510 Series Router User Manual
7
1.3 Dimension
Figure 1-2 G510 Series Router Dimension
1.4 How to Install
1.4.1 SIM/UIM card install
Please insert the dual SIM cards before configure the router.

WL-G510 Series Router User Manual
8
Before connecting, please disconnect any power resource of router
1.4.2 Ethernet Cable Connection
Connect the router with a computer by an Ethernet cable for GUI configuration, or transit by a switch.
1.4.3 4G and Wi-Fi Antenna Plug
Connect the two magnetic 4G antennas to Main and Aux interfaces, and the two paddle shape Wi-Fi
antennas to Wi-Fi1 and Wi-Fi2 interfaces.
Wi-Fi antenna supports dual-band 2.4G and 5G band.
1.4.4 Serial Port (Terminal block) Connection
The serial port supports alternative RS232/RS485 port, and RS232 port as default. It might be requested
serial port for RS485 when place order. The serial port feature supports TCP/UDP client/server as
optional, also supports Modbus protocol. You may check the feature in Serial App of Advanced Network
UI. Below is RS232 connection sequence as reference.
Pin
Instruction
Remark
1
V+
Power V+, Anti reverse
2
V-
Power V-
3
GND
GND for RS232 communication
4
RXD/A
RS232 RXD, 57600bps as default
5
TXD/B
RS232 TXD, RS485 optional
6
DI-1
Digital Input, Dry Contact
7
DI-2
Digital Input, Dry Contact
8
DO
Short to GND

WL-G510 Series Router User Manual
9
The serial port will be unavailable in WL-G510 standalone GPS model.
1.4.5 Console Port Connection
Connect the router to a computer by an RJ45-DB9 cable for CLI configuration and router
system debugging.
Pin
Instruction
Remark
1
CTS
Input
2
RTS
Output
3
RXD
Input
4
TXD
Output
5
GND
GND
6
DSR
Input
7
DCD
Output
8
DTR
Output
1.4.6 Power Supply
Plug in power adaptor.Voltage input range:+7.5~32VDC. (Extended models: 7.5~ 48VDC)
1.4.7 Review
After insert the SIM/UIM card and connect Ethernet cable and antenna, connect power
supply adaptor or power cable.
Please connect the antenna before power on, otherwise the signal maybe poor
because of impedance mismatching.
Notice:
Step 1 Check the antenna connection.
Step 2 Check SIM/UIM card, confirm SIM/UIM card is available.
Step 3 Power on the industrial Router
----END

WL-G510 Series Router User Manual
10
2Router Configuration
WL-G510 Series routers support GUI and CLI configuration. This chapter introduce GUI
configuration via Ethernet port, if need CLI configuration guide, please contact our
technical support department by email: [e-mail].
2.1 Local Configure
The router supports to be configured by local Ethernet port, you could specify a static IP or
set as DHCP. The default IP address is 192.168.1.1 ，subnet mask is 255.255.255.0,
please refer to followings:
Step 1 Click “start > control panel”,find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 2-3 Network Connection
Step 2 Obtain a IP address automatically or set up IP address,192.168.1.xxx(XXX can be
any number between 2～254)
Step 3 Run an Internet Explorer and visit “http://192.168.1.1/”, to enter identify page.