Wacker Neuson BPU 4045 User manual
Operator´s manual
Vibrating plate
BPU
4045, 5545
Manufacturer
Wacker Neuson Produktion GmbH & Co. KG
Preußenstraße 41
80809 München
www.wackerneuson.com
Tel.: +49-(0)89-354 02-0
Fax: +49-(0)89-354 02-390
Translation of the original operator's manual in German
5100010141IVZ.fm 3
Foreword ............................................................................................................................ 4
Introduction ........................................................................................................................ 5
Safety ................................................................................................................................10
Safety and information labels ........................................................................................ 23
Description ....................................................................................................................... 25
Max. admissible inclination.....................................................................................................25
Description of function........................................................................................................... 25
Transport ......................................................................................................................... 27
Operation .......................................................................................................................... 29
Maintenance ..................................................................................................................... 33
Engine ...............................................................................................................................40
Faults ................................................................................................................................42
Technical data .................................................................................................................. 44
Combustion engine ............................................................................................................... 46
14.2 Combustion engine ...................................................................................................... 63
Emission control systems information and warranty .................................................. 47
Glossary ........................................................................................................................... 48
1Foreword
BBIP
1Foreword
7KLVRSHUDWRUVPDQXDOFRQWDLQVLQIRUPDWLRQDQGSURFHGXUHVIRUWKHVDIHRSHUD
WLRQDQGPDLQWHQDQFHRI\RXU:DFNHU1HXVRQPDFKLQH,QWKHLQWHUHVWRI\RXU
RZQVDIHW\DQGWRSUHYHQWDFFLGHQWV\RXVKRXOGFDUHIXOO\UHDGWKURXJKWKHVDIHW\
LQIRUPDWLRQIDPLOLDUL]H\RXUVHOIZLWKLWDQGREVHUYHLWDWDOOWLPHV
7KLVRSHUDWRUVPDQXDOLVQRWDPDQXDOIRUH[WHQVLYHPDLQWHQDQFHDQGUHSDLU
ZRUN6XFKZRUNVKRXOGEHFDUULHGRXWE\:DFNHU1HXVRQVHUYLFHRUDXWKRUL]HG
VSHFLDOLVWV
7KHVDIHW\RIWKHRSHUDWRUZDVRQHRIWKHPRVWLPSRUWDQWDVSHFWVWDNHQLQWRFRQ
VLGHUDWLRQZKHQWKLVPDFKLQHZDVGHVLJQHG1HYHUWKHOHVVLPSURSHUXVHRULQ
FRUUHFWPDLQWHQDQFHFDQSRVHDULVN3OHDVHRSHUDWHDQGPDLQWDLQ\RXU:DFNHU
1HXVRQPDFKLQHLQDFFRUGDQFHZLWKWKHLQVWUXFWLRQVLQWKLVRSHUDWRUVPDQXDO
<RXUUHZDUGZLOOEHWURXEOHIUHHRSHUDWLRQDQGDKLJKGHJUHHRIDYDLODELOLW\
'HIHFWLYHPDFKLQHSDUWVPXVWEHUHSODFHGLPPHGLDWHO\
3OHDVHFRQWDFW\RXU:DFNHU1HXVRQUHSUHVHQWDWLYHLI\RXKDYHDQ\TXHVWLRQV
FRQFHUQLQJRSHUDWLRQRUPDLQWHQDQFH
$OOULJKWVUHVHUYHGHVSHFLDOO\UHSURGXFWLRQDQGGLVWULEXWLRQULJKWV
&RS\ULJKW:DFNHU1HXVRQ3URGXNWLRQ*PE+&R.*
1RSDUWRIWKLVSXEOLFDWLRQPD\EHUHSURGXFHGLQDQ\IRUPRUE\DQ\PHDQVHOHF
WURQLFRUPHFKDQLFDOLQFOXGLQJSKRWRFRS\LQJZLWKRXWWKHH[SUHVVHGZULWWHQSHU
PLVVLRQRI:DFNHU1HXVRQ
$Q\W\SHRIUHSURGXFWLRQGLVWULEXWLRQRUVWRUDJHRQGDWDPHGLDRIDQ\W\SHDQG
IRUPQRWDXWKRUL]HGE\:DFNHU1HXVRQUHSUHVHQWVDQLQIULQJHPHQWRIFRS\ULJKW
DQGZLOOEHSURVHFXWHG
:HH[SUHVVO\UHVHUYHWKHULJKWWRPDNHWHFKQLFDOPRGLILFDWLRQV±HYHQZLWKRXW
VSHFLDOQRWLFH±ZKLFKDLPDWIXUWKHULPSURYLQJRXUPDFKLQHVRUWKHLUVDIHW\VWDQ
GDUGV
2 Introduction
BBIP
2 Introduction
2.1 Use of the manual
7KLVPDQXDOLVFRQVLGHUHGDVSDUWRIWKHPDFKLQHDQGPXVWEHNHSWLQDVDIH
SODFHWKURXJKRXWWKHHQWLUHOLIHF\FOH7KLVPDQXDOPXVWEHKDQGHGRYHUWRHYHU\
VXEVHTXHQWRZQHURUXVHURIWKHPDFKLQH
2.2 Storing the manual
7KLVPDQXDOLVSDUWRIWKHPDFKLQHDQGPXVWEHVWRUHGLQWKHLPPHGLDWHYLFLQLW\
RIWKHPDFKLQHDQGEHDYDLODEOHWRVWDIIDWDOOWLPHV
,QWKHFDVHRIORVVRULIDVHFRQGFRS\RIWKLVPDQXDOLVUHTXLUHGWKHUHDUHWZR
RSWLRQVIRUREWDLQLQJDUHSODFHPHQW
'RZQORDGIURPWKH,QWHUQHWZZZZDFNHUQHXVRQFRP
&RQWDFW\RXU:DFNHU1HXVRQUHSUHVHQWDWLYH
2.3 Accident prevention regulations
/RFDODFFLGHQWSUHYHQWLRQUHJXODWLRQVDQGQDWLRQDORFFXSDWLRQDOVDIHW\SURYL
VLRQVDSSO\LQDGGLWLRQWRWKHQRWHVDQGVDIHW\LQIRUPDWLRQFRQWDLQHGLQWKLVPDQ
XDO
2.4 Further information
7KLVPDQXDOLVYDOLGIRUGLIIHUHQWPDFKLQHW\SHVIURPDSURGXFWUDQJH$VVXFK
VRPHLOOXVWUDWLRQVPD\GLIIHUIURPWKHDSSHDUDQFHRI\RXUPDFKLQH9DULDQWGH
SHQGHQWFRPSRQHQWVPD\DOVREHGHVFULEHGWKDWDUHQRWLQFOXGHGLQWKHGHOLYHU\
7KHLQIRUPDWLRQFRQWDLQHGLQWKLVPDQXDOLVEDVHGRQPDFKLQHVZKLFKKDYHEHHQ
PDQXIDFWXUHGDWWKHWLPHRISULQWLQJ:DFNHU1HXVRQUHVHUYHVWKHULJKWWRDPHQG
WKLVLQIRUPDWLRQZLWKRXWQRWLILFDWLRQ
,WPXVWEHHQVXUHGWKDWDQ\SRWHQWLDODPHQGPHQWVRUVXSSOHPHQWVIURPWKHPDQ
XIDFWXUHUDUHLQFOXGHGLPPHGLDWHO\LQWKLVPDQXDO
2 Introduction
BBIP
2.5 Target group
Note: 3HUVRQVZRUNLQJZLWKWKLVPDFKLQHPXVWUHFHLYHUHJXODUWUDLQLQJDERXWWKH
ULVNVDQGKD]DUGVRIWKLVPDFKLQH
This operator's manual is aimed at the following persons:
Operatives:
7KHVHSHUVRQVDUHLQWURGXFHGWRWKHPDFKLQHDQGLQIRUPHGDERXWSRWHQWLDOKD]
DUGVDULVLQJIURPLPSURSHUEHKDYLRU
Specialist staff:
7KHVHSHUVRQVKDYHVSHFLDOLVWWUDLQLQJDVZHOODVDGGLWLRQDONQRZOHGJHDQGH[
SHULHQFH7KH\DUHDEOHWRDVVHVVWKHWDVNVHQWUXVWHGWRWKHPDQGUHFRJQL]HSR
WHQWLDOULVNVDQGKD]DUGV
2 Introduction
BBIP
2.6 Symbol explanation
7KLVPDQXDOFRQWDLQVSURPLQHQWVDIHW\LQIRUPDWLRQUHODWLQJWRFDWHJRU\W\SHV
DANGER, WARNING, CAUTIONDQGNOTE.
%HIRUHFRPPHQFLQJDQ\ZRUNRQRUZLWKWKLVPDFKLQHQRWHVDQGVDIHW\LQIRUPD
WLRQPXVWEHUHDGDQGXQGHUVWRRG$OOQRWHVDQGVDIHW\LQIRUPDWLRQFRQWDLQHGLQ
WKLVPDQXDOPXVWDOVREHVKDUHGZLWKPDLQWHQDQFHUHSDLUDQGWUDQVSRUWVWDII
Notes
Note: )XUWKHULQIRUPDWLRQ
DANGER
7KLVFRPELQDWLRQRIV\PERODQGVLJQDOZRUGLQGLFDWHVDKD]DUGRXVVLWXDWLRQ
ZKLFKLILJQRUHGZLOOOHDGWRGHDWKRUVHULRXVLQMXULHV
WARNING
7KLVFRPELQDWLRQRIV\PERODQGVLJQDOZRUGLQGLFDWHVDKD]DUGRXVVLWXDWLRQ
ZKLFKLILJQRUHGPD\OHDGWRGHDWKRUVHULRXVLQMXULHV
CAUTION
7KLVFRPELQDWLRQRIV\PERODQGVLJQDOZRUGLQGLFDWHVDSRWHQWLDOO\KD]DUGRXV
VLWXDWLRQZKLFKLILJQRUHGPD\OHDGWRPLQRULQMXULHVDQGGDPDJHWRWKHPD
FKLQH
2 Introduction
BBIP
2.7 Wacker Neuson representative
'HSHQGLQJRQ\RXUFRXQWU\WKH:DFNHU1HXVRQUHSUHVHQWDWLYHLVD:DFNHU
1HXVRQVHUYLFHD:DFNHU1HXVRQDIILOLDWHRUD:DFNHU1HXVRQGHDOHU
2QWKH,QWHUQHWDWZZZZDFNHUQHXVRQFRP
7KHDGGUHVVRIWKHPDQXIDFWXUHULVORFDWHGDWWKHEHJLQQLQJRIWKLVPDQXDO
2.8 Limitation of liability
:DFNHU1HXVRQZLOOUHIXVHWRDFFHSWOLDELOLW\IRULQMXULHVWRSHUVRQVRUIRUGDPDJH
WRPDWHULDOVLQWKHIROORZLQJFDVHV
)DLOXUHWRFRPSO\ZLWKWKLVPDQXDO
,PSURSHUXVH
8VHRIXQWUDLQHGVWDII
8VHRIQRQDXWKRUL]HGVSDUHSDUWVDQGDFFHVVRULHV
,PSURSHUKDQGOLQJ
$Q\W\SHRIVWUXFWXUDODOWHUDWLRQ
1RQFRPSOLDQFHZLWKZLWKWKH*HQHUDO7HUPVDQG&RQGLWLRQVRI%XVLQHVV
7&
2 Introduction
BBIP
2.9 Identification of the machine
Nameplate data
7KHQDPHSODWHOLVWVLQIRUPDWLRQWKDWXQLTXHO\LGHQWLILHVWKLVPDFKLQH7KLVLQIRU
PDWLRQLVQHHGHGWRRUGHUVSDUHSDUWVDQGZKHQUHTXHVWLQJDGGLWLRQDOWHFKQLFDO
LQIRUPDWLRQ
X(QWHUGHWDLOVRQWKHPDFKLQHLQWKHIROORZLQJWDEOH
Item Designation Your information
*URXSDQGW\SH
&RQVWUXFWLRQ\HDU
0DFKLQHQR
9HUVLRQQR
,WHPQR
BPU 2 Safety
2Safety
2.1 Principle
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine must only be used for the following purposes:
Compaction of soils.
Compaction of asphalt.
Shaking in of paving stones.
The machine may not be used for the following purposes:
Compaction of intensely cohesive soils.
Compaction of frozen soils.
Compaction of hard, non-compactable soils.
Compaction of soils that are not capable of bearing a load.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and mainte-
nance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the man-
ufacturer. To do so will endanger your safety and the safety of other people! In
addition, this will void the warranty and the liability on behalf of the manufacturer.
Especially the following are cases of structural modifications:
Opening the machine and the permanent removal of components from
Wacker Neuson.
Installing new components which are not from Wacker Neuson and not equiv-
alent to the original parts in design and quality.
Installation of accessories which are not from Wacker Neuson.
It is no problem to install spare parts from Wacker Neuson.
It is no problem to install accessories that are available in the Wacker Neuson
product range of your machine. Please refer to the installation regulations in this
operator's manual.
2 Safety BPU
Requirements for operation
The ability to operate the machine safely requires:
Proper transport, storage and setup.
Careful operation.
Careful service and maintenance.
Operation
Operate the machine only as intended and only when in proper working condi-
tion.
Operate the machine in a safety-conscious manner with all safety devices at-
tached and enabled. Do not modify or disable any safety devices.
Before starting operation, check that all control and safety devices are function-
ing properly.
Never operate the machine in a potentially explosive environment.
Supervision
Never leave the machine running unattended!
Maintenance
Regular maintenance work is required in order for the machine to operate prop-
erly and reliably over time. Failure to perform adequate maintenance reduces the
safety of the machine.
Strictly observe the prescribed maintenance intervals.
Do not use the machine if it requires maintenance or repairs.
Malfunctions
If you detect a malfunction, you must shut down and secure the machine imme-
diately.
Eliminate the malfunctions that impair safety immediately!
Have damaged or defective components replaced immediately!
For further information, refer to chapter Troubleshooting.
Spare parts, accessories
Use only spare parts from Wacker Neuson or such that are equivalent to the orig-
inal parts in design and quality.
Only use accessories from Wacker Neuson.
Non-compliance will exempt the manufacturer from all liability.
BPU 2 Safety
Exclusion of liability
Wacker Neuson will refuse to accept liability for injuries to persons or for damage
to materials in the following cases:
Structural modifications.
Improper use.
Failure to comply with this operator's manual.
Improper handling.
Using of spare parts which are not from Wacker Neuson and not equivalent
to the original parts in design and quality.
Using of accessories which are not from Wacker Neuson.
Operator's manual
Always keep the operator's manual near the machine or near the worksite for
quick reference.
If you have misplaced the operator's manual or require an additional copy, con-
tact your Wacker Neuson representative or download the operator's manual from
the Internet (www.wackerneuson.com).
Always hand over this operator's manual to other operators or to the future owner
of the machine.
Country-specific regulations
Observe the country-specific regulations, standards and guidelines in reference
to accident prevention and environmental safety, for example those pertaining to
hazardous materials and wearing protective gear.
Complement the operator's manual with additional instructions taking into ac-
count the operational, regulatory, national or generally applicable safety guide-
lines.
Operator's controls
Always keep the operator's controls of the machine dry, clean and free of oil or
grease.
Operating elements such as ON/OFF switch, gas handles etc. may not be
locked, manipulated or changed without authorization.
Cleaning
Always keep the machine clean and be sure to clean it each time you have fin-
ished using it.
Do not use gasoline or solvents. Danger of explosion!
Do not use high pressure washers. Permeating water can damage the machine.
When electrical equipment is present, this can pose a serious injury risk from
electric shocks.
2 Safety BPU
Checking for signs of damage
Inspect the machine when it is switched off for any signs of damage at least once
per work shift.
Do not operate the machine if there is visible damage or defects.
Have any damage or defects eliminated immediately.
2.2 Qualification of the operating personnel
Operator qualifications
Only trained personnel are permitted to start and operate the machine. The fol-
lowing rules also apply:
You are at least 18 years of age.
You are physically and mentally fit.
You have received instruction on how to independently operate the machine.
You have received instruction in the proper use of the machine.
You are familiar with required safety devices.
You are authorized to start machines and systems in accordance with the
standards governing safety.
Your company or the operator has assigned you to work independently with
this machine.
Incorrect operation
Incorrect operation or misuse by untrained personnel can endanger the health
and safety of the operator or third persons and also cause machine and material
damage.
Operating company responsibilities
The operating company must make the operator's manual available to the oper-
ator and ensure that the operator has read and understood it.
Work recommendations
Please observe the recommendations below:
Work only if you are in a good physical condition.
Work attentively, particularly as you finish.
Do not operate the machine when you are tired.
Carry out all work calmly, circumspectly and carefully.
Never operate the machine under the influence of alcohol, drugs or medica-
tion. This can impair your vision, reactions and your judgment.
Work in a manner that does not endanger others.
Ensure that no persons or animals are within the danger zone.
BPU 2 Safety
2.3 Protective gear
Work clothing
Clothing should be appropriate, i.e. should be close-fitting but not restrict your
movement.
When on construction sites, do not wear long hair loosely, loose clothing or jew-
elry including rings. These objects can easily get caught or be drawn in by mov-
ing machine parts.
Only wear clothing made of material that is not easily flammable.
Personal protective gear
Wear personal protective gear to avoid injuries or health hazards:
Non-skid, hard-toed shoes.
Work gloves made of durable material.
Overalls made of durable material.
Hard hat.
Ear protection.
Ear protection
This machine generates noise that exceeds the country-specific permissible
noise levels (individual rating level). It may therefore be necessary to wear ear
protection. You can find the exact value in the chapter Technical Data.
When wearing ear protection while working, you must pay attention and exercise
caution because your hearing is limited, e.g. in case someone screams or a sig-
nal tone sounds.
Wacker Neuson recommends that you always wear ear protection.
2.4 Transport
Switching off the machine
Before you transport the machine, it must be switched off, and the engine must
be given sufficient time to cool down.
Center pole in transport position
Before commencing transport, move the center pole to the transport position. Let
the center pole latch into its lock.
Observing hazardous materials regulations
Observe the national safety guidelines and the hazardous materials regulations
that apply to the respective means of transportation.
2 Safety BPU
1
Lifting
When lifting the machine, observe the following instructions:
Designate a skilled person to guide you for the lifting procedure.
You must be able to see or hear this person.
Use only suitable and certified hoisting gear, lifting tackle and load-bearing
equipment with sufficient lifting capacities.
Only use the attachment points described in the operator's manual.
Attach the machine securely to the hoisting gear.
Ensure that no one is nearby or under the machine.
Do not climb onto the machine.
Loading the machine
Loading ramps must be able to bear the load and be in a stable position.
Make sure that no one can be endangered if the machine slips away or tips over
or if machine parts suddenly move upward or downward.
Put the operating controls and moving parts in their transport position.
Secure the machine with load-securing straps so that it cannot tip over, fall down
or slide away. Only use the attachment points described in the operator's manu-
al.
Transport vehicle
Use only suitable transport vehicles with sufficient load-carrying capacity and
suitable tie-down lugs.
Transporting the machine
Secure the machine on the transport device against tilting, falling or slipping.
Only use the lashing points listed in the operating instructions.
Also observe the country-specific regulations, standards and guidelines.
Restarting
Machines, machine parts, accessories or tools that were detached for transport
purposes must be re-mounted and fastened before restarting.
Only operate in accordance with the operating instructions.
2.5 Operating safety
Explosible environment
Never operate the machine in a potentially explosive environment.
BPU 2 Safety
1
Work environment
Familiarize yourself with your work environment before you start work. This in-
cludes e.g. the following items:
Obstacles in the work and traffic area.
Load-bearing capacity of the ground.
The measures needed to cordon off the construction site from public traffic in
particular.
The measures needed to secure walls and ceilings.
Options available in the event of an accident.
Safety in the work area
When working with the machine especially pay attention to the following points:
Electric lines or pipes in work area.
Gas lines or water lines in the work area.
Starting the machine
Observe the safety information and warning notices located on the machine and
in the operator's manual.
Never attempt to start a machine that requires maintenance or repairs.
Start the machine as directed in the operator's manual.
Vertical stability
Always ensure that the machine is vertically stable and cannot tip over, roll or
slide away.
Proper operator position
Do not leave the proper operator position while operating the machine.
The proper operator position is behind the center pole of the machine.
Leaving the danger area
Injury may be caused by moving machines or flying materials.
Ensure that other persons observe a minimum safety distance of 2 m from the
machine.
Caution with movable parts
Keep your hands, feet and loose clothing away from moving or rotating machine
parts. Parts of your body being pulled in or crushed can cause serious injuries.
2 Safety BPU
1
Switching off the machine
Switch off the engine in the following situations:
Before breaks.
If you are not using the machine.
Store the machine in such a way that it cannot tilt, fall or slip.
Storage location
After operation, allow the machine to cool and then store it in a sealed-off, clean
and dry location protected against frost and inaccessible to children.
Not using starter sprays
Highly flammable starter sprays pose a fire hazard.
Do not use any starter sprays.
Starter sprays are highly flammable and can cause backfiring and engine dam-
age.
Vibrations
When manually operated machines are intensively used, long-term damage
caused by vibrations cannot be precluded.
Observe the relevant legal instructions and guidelines to minimize vibration
stress.
Details on vibration stress associated with the machine can be found in the chap-
ter Technical Data.
2.6 Safety during the operation of vibratory plates
Belt guard
Never operate the machine without a belt guard!
Exposed belts and belt pulleys are dangerous and can cause serious injuries if
they pull in any part of your body or if parts are ejected.
Danger of falling over
Operate the machine so that it cannot tip over or fall down from bordered areas,
edges and steps.
Load-carrying capacity of the ground
Keep in mind that the load-carrying capacity of the earth to be compressed or
bed can be greatly reduced by the effects of vibration, for example near slopes.
Avoiding crushing
When operating the machine, pay particular attention to avoid being squeezed
between the machine and an obstacle. Always look in the direction of travel!
BPU 2 Safety
1
Compacting on slopes
The following points must be observed if you plan to compact inclined surfaces
(slopes, escarpments):
Always stand above the machine on a slope.
Start at the bottom of a slope (slopes that can be easily managed in an up-
ward direction can be safely traveled in a downward direction also).
Never stand in a position where the machine could possibly fall. A slipping or
tipping machine can cause serious injuries.
Not exceeding the maximum tilt position
Do not exceed the maximum tilt position (see chapter Technical Data).
Only operate the machine at maximum tilt for short periods of time.
If you exceed the maximum tilt, the engine lubrication system will fail and thus
inevitably damage important engine parts.
Check the effects of vibration
Compacting work in the vicinity of buildings can lead to structural damage. For
this reason you must always check the possible effects of vibrations on surround-
ing buildings in the run-up to work.
You must take the following points into special consideration when evaluating the
effects of vibration:
Vibration behavior, sensitivity and resonance frequency of surrounding build-
ings.
Distance of the buildings from the vibrationsite (= worksite).
Condition of the soil.
You may need to carry out measurements to determine the vibration speed.
You must also comply with the relevant guidelines and regulations, particularly
DIN 4150-3.
The foundation must also have sufficient load-bearing capacity to withstand the
compaction energy. In case of doubt involve a soil mechanics specialist in the
evaluation.
Wacker Neuson is not liable for any structural damage.
2.7 Safety during the operation of combustion engines
Checking for signs of damage
Check the engine while switched off for leaks and cracks in the fuel line, tank and
fuel cap at least once per work shift.
Do not operate the machine if there is visible damage or defects.
Have any damage or defects eliminated immediately.
2 Safety BPU
1
Dangers during operation
Combustion engines can be dangerous, particularly during operation and when
refueling.
Read and follow all safety instructions. Otherwise there is a risk of personal injury
and/or damage to property!
Do not start the engine near spilt fuel or if you smell fuel – this may cause an ex-
plosion!
Remove the machine from such areas.
Remove the spilt fuel immediately!
Not changing the engine speed
Do not change the preset engine speed, as this may cause engine damage.
Preventing fires
Open flames and smoking are strictly prohibited in the immediate vicinity of the
machine.
Make sure that waste, such as paper, dry leaves or grass do not accumulate
around the exhaust muffler. The waste materials may ignite.
Safety precautions when refueling
Please observe the following safety-relevant instructions when refueling:
Do not refuel near open flames.
Do not smoke.
Turn off the engine before refueling and allow it to cool down.
Refuel in a well-ventilated environment.
Wear fuel-proof protective gloves and, if there is the possibility of spraying,
protective goggles and clothing.
Do not inhale fuel vapors.
Avoid skin and eye contact with fuel.
For refueling, use clean tools such as a hopper.
Do not spill fuel, especially onto hot parts.
Remove any spilt fuel immediately.
Use the correct fuel grade.
Do not mix fuel with other liquids.
Fill the tank only up to the maximum marking. If there is no Maximum mark-
ing, do not fill up the tank completely.
Lock the fuel cap securely after refueling.
BPU 2 Safety
Operation in closed rooms
In closed or partially closed rooms such as tunnels, drifts or deep trenches, en-
sure sufficient ventilation and extraction by, for example, providing a powerful ex-
haust air fan.
Danger of poisoning! Do not inhale exhaust fumes. They contain toxic carbon
monoxide that can lead to unconsciousness or death.
Caution with hot parts
Do not touch any hot parts such as the engine block or exhaust muffler during
operation or directly afterwards. These parts can become very hot and cause se-
vere burns.
Shutting off the fuel tap
When the machine stops, shut off the fuel tap.
Cleaning the engine
Clean the engine when it is cool to remove any dirt.
Do not use gasoline or solvents. Danger of explosion!
Notes on the EPA engine
Caution
This machine is equipped with an EPA-certified engine.
Modifying the motor speed influences the EPA certification and emission. The
motor may only be set by a skilled technician.
For more detailed information, contact your nearest motor or Wacker Neuson
representative.
Health hazard due to exhaust fumes
Warning
The engine's exhaust fumes contain chemicals which are known to the State of
California to cause cancer, congenital defects or other reproductive anomalies.
This manual suits for next models
4
Table of contents
Other Wacker Neuson Power Tools manuals
Wacker Neuson
Wacker Neuson VP 1135A User manual
Wacker Neuson
Wacker Neuson IEC User manual
Wacker Neuson
Wacker Neuson BPS1030 User manual
Wacker Neuson
Wacker Neuson DPU Series User manual
Wacker Neuson
Wacker Neuson BV50A-H User manual
Wacker Neuson
Wacker Neuson WP User manual
Wacker Neuson
Wacker Neuson DPU 6055 User manual
Wacker Neuson
Wacker Neuson DPU 3050H User manual
Wacker Neuson
Wacker Neuson BS 50-4 User manual
Wacker Neuson
Wacker Neuson DPU 6555He User manual
Wacker Neuson
Wacker Neuson VP 1135R User manual
Wacker Neuson
Wacker Neuson EH 9 BL/230 User manual
Wacker Neuson
Wacker Neuson BPU 3050A User manual
Wacker Neuson
Wacker Neuson BS 50-4s User manual
Wacker Neuson
Wacker Neuson VP1340A US User manual
Wacker Neuson
Wacker Neuson APS1030 User manual
Wacker Neuson
Wacker Neuson BH23 User manual
Wacker Neuson
Wacker Neuson BPU 2540A User manual
Wacker Neuson
Wacker Neuson EH 23 Low Vib User manual
Wacker Neuson
Wacker Neuson BS 50-2 User manual
