WAGO WAGO-PERSPECTO 762 Series User manual

Pos:2/Dokumentationallgemein/Einband/EinbandHandbuch- F ro nts ei t e 2015 - mit DocV ari abl e n (Sta nd ar d)@ 9\mod_1285229289866_0.docx@ 64941 @ @ 1
WAGO-PERSPECTO® 762
Manual
762-1057
WP 57 QVGA
PERSPECTO® WP -
Web Panel
Version 1.4.0
Pos: 3 / All e Seri e n ( Al lg e m ein e M od ul e) /R ec htl ic h es , A ll ge mei n es /I mpr e ss um für Sta nd ard h an d büc h er - al lg . A ng a be n, Ansc hri ft en, T elef o nn u m mer n und E -Mai l-Adr es s e n @ 3\mod_1219151118203_21.docx @ 21060@ @ 1

2 WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
© 2016 by WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: [phone] – 0
Fax: [phone] – 1 69
E-Mail: [email protected]om
Web: http://www.wago.com
Technical Support
Phone: [phone] – 5 55
Fax: [phone] – 85 55
E-Mail: [email protected]om
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: [e-mail]
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
===Ende der List e f ür Te xtm ar ke Ei nb a nd _ vor n e = ==

WAGO-PERSPECTO® 762 Table of Contents 3
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 5 /D o ku ment ati on allg e mei n /Ver zei c hni ss e/I nh alt s verz ei ch nis - Ü b er schr if t oG und Ver zei ch nis @ 3\mod_1219151230875_21.docx@21063 @ @ 1
Table of Contents
1Notes about this Documentation................................................................. 5
1.1 Scope of Validity....................................................................................... 5
1.2 Copyright................................................................................................... 5
1.3 Symbols..................................................................................................... 6
1.4 Number Notation....................................................................................... 8
1.5 Font Conventions ...................................................................................... 8
2Important Notes ........................................................................................... 9
2.1 Legal Bases ............................................................................................... 9
2.1.1 Subject to Changes ............................................................................... 9
2.1.2 Personnel Qualification ........................................................................ 9
2.1.3 Use of the 762 Series in Compliance with Underlying Provisions ...... 9
2.1.4 Technical Condition of Specified Devices ........................................... 9
2.2 Safety Advice (Precautions).................................................................... 11
2.3 Characteristics of the CODESYS Web Visualization............................. 13
2.3.1 Description of the Function "CookieHandling()"............................... 14
3Device Description ..................................................................................... 15
3.1 PERSPECTO WP Web Panel ................................................................. 15
3.2 View ........................................................................................................ 16
3.2.1 Front View.......................................................................................... 16
3.2.2 Back View .......................................................................................... 17
3.3 Connectors............................................................................................... 18
3.3.1 X1 – Supply Voltage .......................................................................... 18
3.3.2 X6 – ETHERNET Interface ............................................................... 19
3.3.3 X8/X9 – USB Interfaces..................................................................... 20
3.4 Battery Case ............................................................................................ 21
3.5 Slot for Memory Card ............................................................................. 22
3.6 Operating Elements................................................................................. 23
3.6.1 Service Button .................................................................................... 23
3.7 Technical Data ........................................................................................ 24
3.7.1 Housing............................................................................................... 24
3.7.2 Power Supply...................................................................................... 24
3.7.3 Display................................................................................................ 24
3.7.4 Hardware ............................................................................................ 25
3.7.5 Software.............................................................................................. 25
3.7.6 Interfaces ............................................................................................ 25
3.8 Approvals ................................................................................................ 26
3.9 Standards and Guidelines ........................................................................ 26
4Mounting..................................................................................................... 27
4.1 Front Panel Installation ........................................................................... 27
5Connect Devices ......................................................................................... 29
6Commissioning ........................................................................................... 30
6.1 Switch on................................................................................................. 30
6.2 IP Address of the Device......................................................................... 31
6.2.1 General ............................................................................................... 31

4 Table of Contents WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
6.2.2 Setting the IP Address ........................................................................ 31
6.2.3 IP Address .......................................................................................... 32
6.3 The WAGO Control Center .................................................................... 33
6.3.1 Starting the WAGO Control Center ................................................... 33
6.3.2 “General” Tab..................................................................................... 34
6.3.3 “Autostart Applications” Tab ............................................................. 35
6.3.4 “Users” Tab ........................................................................................ 36
6.3.5 “FTP” Tab .......................................................................................... 37
6.3.6 “HTTP” Tab ....................................................................................... 38
6.3.7 “RAS” Tab.......................................................................................... 39
6.3.8 “Backup/Restore” Tab........................................................................ 40
6.3.9 "Advanced" Tab ................................................................................. 41
6.3.9.1 Read Memory Consumption.......................................................... 41
6.3.10 Saving the Configuration.................................................................... 42
6.4 Optimizing Web Visualization................................................................ 43
6.4.1 Starting the Java Virtual Machine as an Applet Viewer .................... 43
6.4.2 Starting Internet Explorer in Full-Screen Mode................................. 43
6.4.3 Adjustments in the WEBVISU.htm of the Controller........................ 44
7Service ......................................................................................................... 45
7.1 Battery Maintenance ............................................................................... 45
List of Figures ...................................................................................................... 46
List of Tables........................................................................................................ 47
=== En de der Lis te für T extmar ke Verz eich nis_vor ne == =

WAGO-PERSPECTO® 762 Notes about this Documentation 5
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 7 / All e Seri e n ( Al lg e m ein e M od ul e) /Ü b ers c hri ft en/ N e ue Ü b ers c hri ft en /E be n e 1H in w eis e z u dies er Do kum e nt ati on - Ü b er schr i f t 1 @ 4\mod_1237987661750_21.docx@ 29029 @ 1@ 1
1 Notes about this Documentation
Pos: 8 /S eri e 76 2 ( PER S PEC TO un d e! DI SPL AY) /Hi n weis e zu di eser D o ku ment ati o n/Hi nw eis e z ur D o kum enta tio n 0762-P ER SPEC T O @ 9\mod_1294732681438_21.docx@ 68130@ @ 1
The WP 57 QVGA 762-1057 shall only be installed and operated according to the
instructions in these operating.
Pos: 9 /Al le S eri en ( Allg em ein e Mod ul e)/Si cher h eits- unds onstige Hinweise/HinweisHinweis:Dokumentation aufbewahren @ 4\mod_1237987339812_21.docx@ 29026@ @ 1
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation is
included, if necessary.
Pos: 10 /S er ie 76 2 (P ER S PEC TO und e!D IS P LA Y) /H in w eis e z u di es er Do k u ment at i on/ G ül ti g kei ts b er eic h 07 6 2-xxxx @ 9\mod_1294732838794_21.docx@ 68133@ 2 @ 1
1.1 Scope of Validity
This documentation applies to PERSPECTO-Panel 762-1057 (WP 57 QVGA).
Pos: 11.1 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/ Ebe ne 2/Ur h eber sc hutz - Über sc hr ift 2 @ 23\mod_1435647042188_21.d ocx @ 18480 8 @ 2@ 1
1.2 Copyright
Pos: 11.2 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes /U rh eb ersc hu tz aus führ li ch @ 4\mod_1235565145234_21.docx @ 27691@ @1
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Pos:11.3/Dokumentationallgemein/Gliederungselemente/---Seite nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

6 Notes about this Documentation WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 11 .4 /All e Seri en ( All ge mei ne M od ule) /Ü bers c hrif te n/N eu e Ü ber schr if te n/E be ne 2 Sy mbol e - Ü ber sc hri ft 2 @ 13\mod_1351068042408_21.docx@ 105270@ 2@ 1
1.3 Symbols
Pos: 11 .5.1 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons tig e H i n weis e/ Ge fa hr /G ef a hr : _ War nu ng vor P ersonenschäden allgemein_- Erl äuter ung @ 13\mod_1343309450020_21.docx@ 101029@ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 11 .5.2 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sonstigeHi nwei s e/ Ge fa hr/ G ef ahr : _War nu ng vor Per s on ens ch ä de n d ur ch ele ktr isc he n St ro m _ - Erläuterung@ 13\mod_1343309694914_21.docx@ 101030 @ @ 1
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 11.5 .3 / All e Serie n ( Al lg emei ne Module)/Sicherheits-u nd s ons t ig e H i nwei s e/ War nung / W arn ung: _W ar nu ng vor P er so nens c häd e n al lg em ei n_ - Erläuterung@ 13\mod_1343309877041_21.docx@ 101035@ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 11 .5.4 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Vors ic ht /V ors ic ht: _War n ung vor Per s one nsc hä d en al lg em ein _ - Erläuterung@ 13\mod_1343310028762_21.docx@ 101038@ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 11 .5.5 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Ac htu ng/ Ac htu ng : _War nu ng vor Sachs c häd en allg e mei n_ - Erläuterung@ 13\mod_1343310134623_21.docx@ 101041@ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 11 .5.6 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti g e Hi n weis e/ Ac htu ng/ Ac htu ng : _War nu ng vor Sachs c häd en durc h ele ktr ost atis c he Aufl a dung _ - Erl äut er ung @ 13\mod_1343310227702_21.docx@ 101044@ @ 1
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 11 .5.7 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sonstige Hi nweise/Hinweis/Hinweis:_Wichtiger Hin weis allgemein_- Er läut er u ng @ 13\mod_1343310326906_21.docx@ 101047@ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 11 .5.8 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- und sonstigeHi nwei s e/I nf or ma ti o n/I nf or ma ti on: _W ei ter e I nf or mat io n allg e mei n_ - E rl äu ter ung @ 13 \mod_1343310439814_21.docx@ 101051@ @ 1

WAGO-PERSPECTO® 762 Notes about this Documentation 7
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos:11.6/Dokumentationallgemein/Gliederungselemente/---Seite nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

8 Notes about this Documentation WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 11.7 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/ Ebe ne 2/Dar st ell ung der Z a hle ns yst em e - Ü bers c hri ft 2 @ 23\mod_1435647128078_21.docx @ 184811@ 2@ 1
1.4 Number Notation
Pos: 11.8 /All e Seri en ( Al lg emei ne M o dul e)/ R ec htli ch es , Al lg e mei nes / Za hle ns yst e me @ 3\mod_1221059454015_21.docx@ 21711@ @ 1
Table 1: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated with
dots (.)
Pos: 11.9 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/ Ebe ne 2/Sc hri ft ko nvent i one n - Ü ber sc hri ft 2 @ 23\mod_1435647186005_21.docx@ 184814@ 2@ 1
1.5 Font Conventions
Pos:11.10/AlleSerien(AllgemeineModule) /R e ch tl ich es , A ll ge m ei nes / Sc hr ift k on ve nti on en @ 3 \mod_1221059521437_21.docx@ 21714@ @ 1
Table 2: Font Conventions
Font Type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Program Files\WAGO Software
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under Start of measurement range.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]
Pos: 12 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-PERSPECTO® 762 Important Notes 9
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 13 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/NeueÜberschriften/Ebene1Wichtige Erläuterungen-Ü b ers chr if t 1 @ 4\mod_1241428899156_21.docx@ 32170 @ 1@ 1
2 Important Notes
Pos: 14.1 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes Wic ht ig e Er lä ut er u ng en - Ei nl ei t ung @ 3\mod_1221059818031_21.docx@ 21717@ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 14.2 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/N eu e Ü b ersc hrif te n/ Ebe ne 2R ec htl ic he Gru ndl age n - Ü b ers chr if t 2 @ 3\mod_1221060626343_21.docx@ 21726 @ 2@ 1
2.1 Legal Bases
Pos: 14.3 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nes Ä nder u ngs vor be h alt - Ü b er sc hri f t 3 un d I n halt @ 3 \mod_1221060036484_21.docx @ 21720@ 3@ 1
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.
Pos: 14.4 /Ser ie 76 2 ( P ERS PEC TO und e!D IS P LA Y) / Wi ch ti g e Er l ä uter u ng en /P er s on al q u ali fi ka ti o n 07 62-xxxx @ 9\mod_1294733290824_21.docx@ 68136@ 3@ 1
2.1.2 Personnel Qualification
All sequences implemented on Series 762 devices may only be carried out by
electrical specialists with sufficient knowledge in automation technology. These
specialists must be familiar with the current standards and guidelines for the
devices and the automated environments.
All changes to the controller shall always be performed by qualified personnel
with sufficient skills in PLC programming.
Pos: 14.5 /Ser ie 76 2 ( P ERS PEC TO und e!D IS P LA Y) / Wi ch tig e E rlä uter u ngen /Bes ti mm ungsg e mäß e Ver w end ung 076 2-xxxx @ 9\mod_1294733371727_21.docx @ 68139 @ 3 @ 1
2.1.3 Use of the 762 Series in Compliance with Underlying
Provisions
762 Series modules are suitable for use in the area of time control and automation.
Their use extends beyond residential and commercial areas, as well as industrial
areas. Technical data must be observed for all types of applications.
Radio interference in residential areas
This is a class A device. This device can cause radio interference in residential
areas. In this case, the operator may be required to take appropriate measures.
Pos: 14.6 /All e Seri en ( Al lg emei ne Mo d ule) /R ec htli ch es , A llg e mei nesT ec hni s ch er Z us tan d der G er ät e - Ü bersc hrift 3 u nd Inhal t @ 3\mod_1221060446109_21.docx@ 21723@ 3 @ 1
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. WAGO

10 Important Notes WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of
changes in hardware or software as well as to non-compliant usage of devices.
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos: 14.7 /Ser ie 76 2 ( P ERS PEC TO und e!D IS P LA Y) / Wi ch ti g e Er l ä uter u ngen/Sicherheitshinweise/Hinweis/Hinweis:Pixelfehleri m T FT-Display @ 10\mod_1306840913476_21.docx@ 73481@ @ 1
Pixel error in TFT display
Any pixel errors of the TFT display due to production reasons do not represent
grounds for complaint!
Pos: 14.8 /Dokumentationallgemein/Gliederungselemente/---Seiten wec hs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-PERSPECTO® 762 Important Notes 11
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 14.9 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n/N eu e Ü b ersc hrif te n/ Ebe ne 2 Sic her hei ts hi nwei se - Ü b ers chr if t 2 @ 6\mod_1260180299987_21.docx @ 4672 4@ 2 @ 1
2.2 Safety Advice (Precautions)
Pos: 14.1 0 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä ut er ung en /Si c h er hei ts hi n wei se /Ei nlei t u ng Si c h er hei tshi nw eise Har d ware @ 6\mod_1260180170493_21.docx@46720 @ @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos: 14.1 1. 1 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Nicht an Gerät en unter Sp a nn ung ar beit e n! @ 6\mod_1260180365327_21.docx @ 46727@ @ 1
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Pos: 14.1 1. 2 / S er ie 762 ( P ER SP EC T O und e!D IS PL AY) / Wic hti g e Er l äut er u ng e n/ Sic her hei t shi n weis e/ Ge fa hr/ G ef ahr : Ein bau nur in G eh ä use n, Schr ä n ke n od er ele ktri sc h en B etr ie bs r äu m en! @ 10\mod_1300116248588_21.docx@ 70737@ @1
Install only in appropriate housings, cabinets or in electrical operation
rooms!
The device is an open unit. As such, install it exclusively in appropriate housings,
cabinets or in electrical operation rooms. Allow access to authorized staff only by
means of specific keys or tools.
Pos:14.11.3/Alle Serien(AllgemeineDokumente) (AllgemeineM o dul e) / Wic ht ig e Erlä uter u ngen /Si c h er hei ts hi n wei se /G ef ahr /G ef ahr : Unfal l v erh üt ung s vor sc hri ft en bea ch te n! @ 6\mod_1260180657000_21.docx @ 46735 @ @ 1
Pos: 14.1 1. 4 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Auf normg er ec ht e n A ns c hlu ss ac ht en! @ 6 \mod_1260180753479_21.docx@ 46739@ @ 1
Pos: 14.1 2. 1 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: D e fe kt e oder besc h ädig t e Ger ät e aus ta usc h en! @ 6 \mod_1260180857358_21.docx@ 46743 @ @ 1
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts), since the long-term functionality of device/module involved can no
longer be ensured.
Pos: 14.1 2. 2 / AlleSerien(AllgemeineDokumente)(AllgemeineModule)/WichtigeErläuterungen/Sicherheitshinweise/Achtung/Achtung:Geräte vor kriec hende n und isol iere nden Sto ffen sc hütze n! @ 6\mod_1260181036216_21.docx@ 46747@ @ 1
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for handling
devices/modules.
Pos:14.12.3/Alle Serien(AllgemeineDokumente) (Allgemeine M o dul e) / Wich ti g e Er l äut er u ng en /Sic h erh ei ts hin w eis e /Ac ht u ng /Ac ht u ng : Rei nig u ng nur mit zul ässi g en M at er ial ie n! @ 6\mod_1260181203293_21.docx @ 46751@ @ 1
Clean only with permitted materials!
Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.
Pos: 14.12.4/AlleSerien(AllgemeineDokumente)(AllgemeineModule)/WichtigeErläuterungen/Sicherheitshinweise/Achtung/Achtung:Kei n K o nt a kts pr a y verw e nd en! @ 6\mod_1260181290808_21.docx@ 46755@ @ 1

12 Important Notes WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Pos: 14.1 2.5 / All e S eri en (Al lg em eine M o dul e)/Si ch erh eits- un d s o nsti g e H in wei se /A cht ung /Ac ht u ng : N ic ht i n T el ek om muni kati ons n etz en ei ns etz en! (Z usa tz R J-45) @ 3\mod_1224065187468_21.docx@ 24076@ @ 1
Do not use in telecommunication circuits!
Only use devices equipped with ETHERNET or RJ-45 connectors in LANs.
Never connect these devices with telecommunication networks.
Pos: 14.1 2. 6 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: E l e ktr ost at isc h e Ent l a du ng vermei den! @ 6\mod_1260181364729_21.docx@ 46759@ @ 1
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Pos: 15 /D oku ment ation all g emei n/ Gli e der ung s el e me nte /---Sei t e n wechs el--- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1

WAGO-PERSPECTO® 762 Important Notes 13
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 16 /S er ie 76 2 (P ER S PEC TO und e!D IS P LA Y) / Wic h tig e Erl äut eru ng en /B es on d er h eit en d er CoD e S ys-We b-Visualisierung @ 10\mod_1313500936135_21.docx@ 77143@ 23 @ 1
2.3 Characteristics of the CODESYS Web Visualization
Depending on the version of CODESYS installed
The functionality of the Web visualization depends on the version of CODESYS
"webvisu.jar" Java applet used.
This file is normally the same version as the CODESYS version installed. The
general function of the file is the responsibility of the company 3S. The version
and function be explicitely checked. Always use the most current CODESYS
version from the WAGO-I/O-PRO-CD released by WAGO Kontakttechnik
GmbH & Co. KG.
Please also observe the chapter "CODESYS Web Visualization" in the
CODESYS online help.
The file "webvisu.htm" is the base HTML page for Web visualization and is
copied when installing the WAGO-IO-PRO or WAGO-AUTOMATION-
COCKPIT to the subdirectory <3S Software Installation Directory>\Visu.
Settings can be made in this file to optimize and adjust Web visualization.
Observe the CODESYS online help, chapter "Editing the 'webvisu.htm' file" and
chapter "Optimization of the Web Visualization" > "Adjustments in the
WEBVISU.htm of the Controller".
Limitations of the CODESYS Web visualization
The CODESYS Web visualization contains some limitations and particularities.
In connection with the Web panel, the following description must be observed for
continuous operation: To use this file with the WAGO Web panel, the call for the
function "CookieHandling()" is disabled.
Depending on the visualization elements and Web server used, memory
requirements may continuously increase in the panel. Please regularly check the
memory requirements of the panel. Observe the chapter "The WAGO Control
Center" > "Advanced Tab".

14 Important Notes WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Response time depends on the number, type and form of the objects
displayed
This device has been designed for presentation of simple CODESYS Web
visualizations. The device establishes communication with a controller (e.g. from
the series 750-88x or 758-8xx) and displays the visualization pages stored there.
Due to the limitations of the technologies used, the following points should be
observed:
The response time depends on the number, type and form of the objects displayed.
The fewer the objects displayed per page, the faster the device responds.
More time is required the first time a visualization page is called up than
subsequent calls.
There is a delay the first time a visualization page is displayed because it is first
fully compiled in the working memory.
Should it take more than 1 second to compile, a message appears with the text
"Loading ..." to indicate that background activity is underway. When switching to
another visualization page, a copy of the page remains in the cache and
subsequent calls of the page are much faster. Because the size of the cache is
limited, it may not always be possible to store all pages in memory entirely
depending on the application. As a result, you may experience delays later when
calling up the same page.
2.3.1 Description of the Function "CookieHandling()"
The use of this Java Script function results in a continuous memory consumption
on the Web panel.
The last set language for dynamic texts is stored by this mechanism and is
automatically reset at the next call-up of the Web visualization.
This function is not possible on the Web panels. The response corresponds with
that of an Internet browser that does not accept cookies.
Pos: 17 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-PERSPECTO® 762 Device Description 15
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 18 /A lle Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/ Ebe ne 1 Ger ät ebes c hrei b ung - Ü b ers chr if t 1 @ 3 \mod_1233756084656_21.docx@ 27096@ 1 @ 1
3 Device Description
Pos: 19 /S er ie 76 2 (P ER S PEC TO und e!D IS P LA Y) /G er ä te b esc hr ei b ung / Eig e nsc h aft en /Ei nlei tu ng der Besc hr ei b ung / Ger ät eb esc hrei b ung 076 2-xxxx allg emein @ 9\mod_1294144990053_21.docx @ 67820@ @ 1
The 762 Series panels are used to operate and visualize the controllers of the
WAGO-I/O-SYSTEM. The integrated WAGO-AUTOMATION COCKPIT
development environment is used to program the panels and controllers.
Pos: 20 /S er ie 76 2 (P ER S PEC TO und e!D IS P LA Y) /G er ä te b esc hr ei b ung / Eig e nsc h aft en /Ei nlei tu ng der Besc hr eib ung / Ger ät eb esc hrei b ung 0762-1xxx WP@ 9\mod_1295609853784_21.docx @ 68637@ 2@ 1
3.1 PERSPECTO WP Web Panel
Featuring specialized software, the Web Panel functions as Web browser,
connecting a controller with its own Web server.
With the Web Panels, more control units are easy to add.
The display of CODESYS 2.3 Web visualization is optimized for the Web Panel.
The Web Panels are simple display and HMI devices and have no CODESYS and
HMI runtime of their own.
Pos: 21 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

16 Device Description WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 22 /A ll e Ser i en ( All ge mei neModule)/Überschriften/NeueÜ berschriften/Ebene2Ansicht- Über sc hr ift 2 @ 4\mod_1240984217343_21.docx@ 31958@ 2 @ 1
3.2 View
Pos: 23 /S er ie 76 2 (P ER S PEC TO und e!D IS P LA Y) /G er ä te b esc hr ei b ung / Eig e nsc h aft en /A nsi c ht / Fr o nt ansi c ht 07 62- x057/xxxx- xxxx @ 9\mod_1294145233531_21.docx@ 67823@ 3 @ 1
3.2.1 Front View
Figure 1: Front View
Table 3: Legend for Figure “Front View”
No.
Description
1
Front panel
2
Touch screen display
Pos: 24 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-PERSPECTO® 762 Device Description 17
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos:25/Serie762 (PERSPECTO unde! D ISP LA Y) /G erä te bes c hrei bu ng /Eig e nsc h aft en /Ans ic ht/ R üc ka nsic ht 076 2-1 057 @ 10\mod_1313592168717_21.docx@ 77214 @ 3@ 1
3.2.2 Back View
Figure 2: Back View
Table 4: Legend for Figure “Back View”
No.
Designation
Description
1
-
Housing
2
X1
Connection for 24VDC power supply
3 X2
RS-232 serial interface (COM 3) or RS-485/RS-422 serial
interfaces (COM 2) as D-sub 9 connector
4
X3
RS-232 serial interface as D-sub 9 connector
5
X5
CAN-Bus 0 (CANopen) interface as RJ45 jack
6
X8/X9
USB host interfaces
7
X6
ETHERNET interface as RJ45 jack
8
Service
Service button
9
3V Battery
CR1/2AA
Battery case
10
X13
Slot for SD memory card
Pos: 26 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

18 Device Description WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos: 27 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n/N eu e Ü ber schr if te n/E be ne 2 Ans chl üss e - Ü b ers chr if t 2 @ 4\mod_1240984262656_21. docx @ 3196 1 @ 2@ 1
3.3 Connectors
Pos:28.1/Serie762(PERSPECTOund e!DISPLAY)/Gerätebeschreibung/Eigenschaften/Anschlüsse/Anschluss X1– Versorgungsspannung@ 9\mod_1294223878130_21.docx@ 67929@ 3 @ 1
3.3.1 X1 – Supply Voltage
Use the X1 connection for the device power supply. More information about the
power supply and power consumption is available in the "Technical Data" section.
Figure 3: Connector X1 – Supply Voltage
Table 5: X1 Pin Assignment
Pin
Assignment
Function
1
+24 V
Supply Voltage
2
0 V GND
Reference potential GND
3
FE
Ground conductor
Pos:28.2/Dokumentationall ge mei n/ G li e der ung s el em en te /---Sei t en we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-PERSPECTO® 762 Device Description 19
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos:28.3/Serie762(PERSPECTOund e!DISPLAY)/Gerätebeschreibung/Eigenschaften/Anschlüsse/Anschluss X6- ETH ER NE T-Sc hni t tst el le 10/ 10 0 M Bi t @ 9\mod_1294225066866_21. docx @ 679 49 @ 3 @ 1
3.3.2 X6 – ETHERNET Interface
An RJ45 jack is used for the ETHERNET interface.
The connections and cables must meet CAT.5 and the guidelines for ETHERNET
interfaces.
If there are more than 2 devices in a network, then they must be connected to each
other by a HUB or SWITCH. A "1:1" cable is used here.
If there are only 2 devices in a network, a crossover cable can be used.
Figure 4: Connector X6 ‒ ETHERNET RJ45
Table 6: X6 Pin Assignment
Pin
Assignment
Function
1
TX+
Transmit Data +
2
TX-
Transmit Data -
3
RX+
Receive Data +
4
n.c.
-
5
n.c.
-
6
RX-
Receive Data -
7
n.c.
-
8
n.c.
-
Pos:28.4/Dokumentationallgemein/Gliederungselemente/---Seite nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

20 Device Description WAGO-PERSPECTO® 762
762-1057 WP 57 QVGA
Manual
Version 1.4.0
Pos:28.5/Serie762(PERSPECTOund e!DISPLAY)/Gerätebeschreibung/Eigenschaften/Anschlüsse/Anschluss X8/X9-U SB-Sc h nitt s t ell e n T yp A @ 9\mod_1294225243422_21.docx@ 67953@ 3 @ 1
3.3.3 X8/X9 – USB Interfaces
The interfaces are designed as USB host interfaces, type A.
The following table and illustration provide information on the pin assignment of
the interfaces. The interface connection meets the USB specification 2.0.
Figure 5: Connectors X8/X9 – USB Interfaces
Table 7: X8/X9 Pin Assignment
Pin
Assignment
Function
1
USB_VCC1
USB +5V DC
2
USB_N1
USB data line N1
3
USB_P1
USB data line P1
4
USB_GND
USB GND
Pos: 29 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1