Walker Edison D42CORMB User manual

Parts List
14
1 厂问
Copyright©2019 by Walker Edison Furniture Co., LLC. All rights reseed. P.3






F


J



Hardware List
荨 
邸 
五）  
  
｀ 
三 
尸 
切 
  
Q
  
I) 
Philips head screwdriver required r assembly
(not included)



 
 
 
 
 
 
 
 
 
 
 
 


Step 1
�
/
/
Copyright©2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.5
Attach part (1) to part (2,3) , secure bolt (G )onto part (1) with hex key (L) per diagram.

Insert wooden dowel (C) into part (6,7,8) , secure cam bolt (A) to
part (4) with Philips head screwdriver.

Attach part (4) onto part (3) , using bolt (G) with hex key (L).

Insert part (6,7,8) to part (4),then secure cam lock (B)to part (6,7,8)
with Philips head screwdriver.

Insert part (5) to part (4,6,8) as per diagram .

Using screw (D) attach part (9) to part (6,7,8)
to secure with hex key (L) .

Using bolt (G) to attach part (10,11) to part (9) , insert to part (11) with hex key (L),
using bolt (J) insert to part (10) to secure with hex key (L) .

Using bolt (G,H) attach part (13,6,10,11,12) secure with hex key (L) per diagram .

Using bolt (G,H) attach part (13) onto part (8,10,11,12) , secure part (8,10,11,12) with
hex key (L) per diagram.

Using screw (F) attach plastic wedge (E) onto part (5) with Philips head screwdriver
as per diagram.

Put the hole cover (K) to part (4), put part (14) to part (2) as per diagram .