Walker Edison TW60S User manual

Item #: CHWN
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 11/2010

Parts List

Hardware List
Large screw
Small screw
Large screw
Bolt
Spring washer

Attach chair back (1) to leg assembly (5) using dowels as guides. Secure chair back (1) to leg assembly (5)
using bolt (D) and spring washer (E). Tighten bolt (D) with wrench (A).
Insert slat (2) into leg assembly (5) using dowels as guides. Insert slat (3) into leg assembly (5). Secure slat
(2) to leg assembly (5) using bolt (D) and spring washer (E). Tighten bolt (D) with wrench (A).

Secure leg assembly (4) to chair back (1) and slat (2) using bolts (D) and washers (E). Tighten bolts (D) with
wrench (A).
Attach leg assembly (4) to the chair assembly using dowels and slat (3) as guides.

Carefully slide chair seat (6) under the inverted chair assembly. Secure slats (3) to leg assemblies (4,5)
using long screws (B). You will screw a long screw (B) into each end of both slats (3). Secure chair seat (6)
to the chair assembly using short screws (C). The pre-drilled holes of chair seat (6) are for manufacturing
purposes only. Short screws (C) will be screwed directly into the solid wood of chair seat (6) at chair back
(1), slat (2) and leg assemblies (4,5).
4
5
3
3
2
1