Walker Edison BU44ABMD User manual

P.1
Assembly Instructions
Copyright
201
9b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com Revised 26/07/2019 (E)
Walker Edison
TM
Item# : BU44ABMD

.2
Copyright
©
201
9, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I.Ensure that all parts and hardware are available before beginning assembly.
II.Follow each step carefully to ensure the proper assembly of this product.
21
III.Two people are recommended for ease in the assembly of this product.
IV.The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V.The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI.A hillips head screwdriver is required for the assembly of this product.
VII.ower tools should not be used to assemble this product.
VIII.Drill may be needed for securing product to wall.

P.3
PartsList
1
Copyright
201
9b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
3
2
6
7
458
914
10
10
11
13
12
14

A
B
C
D
E
F
G
J
K
pcs
pcs
L
M
N
P
20 pcs
Wooden dowel
8x30mm
6x35mm Cambolt 18
6x50mm 2
Bolt
pcs
pc
pcs
1
Plastic wedge 6
Screw
3x17mm
M4 HexKey
6
HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
Philipshead screwdriverrequired forassembly
(not included)
P.4
pcs
Camlock
15x11mm 18
pcs
30mm 18
Sticker
pcs
6x12mm 8
Bolt
pcs
2
Handle
Copyright
©
201
9b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
pcs
8
Shelf support pin
pcs
4x22mm 4
Bolt
Q
R
S
T
U
V
1pc Glue tube
4pcs Screw
2pcs Screw
2pcs Plastic strap
2pcs Nut
4pcs
Hinge
pcs
4
Connecting iron sheet
2pcs
Doorstopper
pcs
2
Bolt
3x15mm
4x32mm
W
H
X
Y
28 pcs Screw
4x12mm
2pcs Screw
3x15mm

.5
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
C
C
C
C
C
C
Q
S
1
1
Using cam bolt (C) secure part (1) , then using screw (S) attach door stopper (Q) to part (1) with
Philips head screwdriver as per diagram .

.6
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
F
G
H
3
14
Using bolt (G) attach connecting iron sheet (H) into part (3) with hex key (F) ,then secure part (14)
into part (3) as per diagram.

tep 3
P.7
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
2
8
14
9
Insert wooden dowel (A) into parts (2,8,9,14) as per diagram.

Step 4
.8
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
A A A A
CC
C
CC
C
C
4
5
67
Insert wooden dowel (A) into parts (4,5,6,7) ,then using cam bolt (C) secure parts (4,5,6,7) with
Philips head screwdriver as per diagram.

P.9
Copyright
2019
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 5 21 3
BB
B
BB
B
BB
4
5
6
7
814
Using cam lock(B) secure parts (4,5) to part (8) , parts (6,7) to part (14) with Philips head screwdriver
as per diagram.

.10
Copyright
©
2019
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 6
E
F
2
9
Using bolt (E) attach part (2) to part (9) with hex key (F) as per diagram.