Walker Edison W70IV3D User manual

P.1
Item #: W70IV3D
Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
c
Revised 05/2022 V4
Assembly Instruction
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com

Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1. Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood).
3. Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.

P.3
Part# Description Qty
1 Top panel 01 pcs
2 Shelf 01 pcs
3 Base 01 pcs
4 Center upper panel 02 pcs
5 Center bottom panel 02 pcs
6 Left side panel 01 pcs
7 Right side panel 01 pcs
8 Feet 02 pcs
Part# Description
10 Back panel
11 Drawer front
12 Drawer left side
13 Drawer right side
14 Drawer bottom
Qty
01 pcs
03 pcs
03 pcs
03 pcs
03 pcs
15 Drawer back
16 Center foot
17 Drawer slide
03 pcs
01 pcs
06 pcs
9 Upper back panel 01 pcs
1
2
3
6
7
9
8
10
8
4
5
5
4
16
17
17
17
17
17
17
11
12
13
14
15
(3x)

KWood dowel 06 pcs
JDrawer Limiter 03 pcs
LWasher 02 pcs
MØ6mm 01 pc
A
B
C
D
E
F
Ø5,5*28mm Cam Bolt 10 pcs
10 pcs
Screw 52 pcs
Ø8*30mm Wood dowel 48 pcs
Ø3,5*16mm Screw 39 pcs
Ø8*20mm Wood dowel 12 pcs
Ø4*40mm Screw
G16 pcs
Screw 24 pcs
Ø14*14mm Cam Lock
Ø3,5*30mm
Tape measure and hammer
recommended for assembly
(not included)
I
08 pcs
H
Ø4*16mm
Ø8*50mm
NWall anchor 01 pc

Step 2
P.5
Qty
06
Ø 8,0x50 mm
Step 1 Insert wood dowel (D) into parts (2), (4), (5), (6), (7), (8), (12), (13) and (16).
Insert wood dowel (K) into part (4).
Qty
48
D
Ø 8,0x30 mm
K
8
D
(2x)
D
16
DD
2
D
D
D
D
D
D
DD
DD
13
12
(3x)
(3x)
7
6
D
D
DD
DD
D
D
D
D
DD
4
(2x)
(2x)
5
D
D
D
K
K
K
D
D
D
Step 2 Attach the Drawer Slide (17) into part (6) and (7) using Screw (I) and a Phillips
head screwdriver. Complete this step twice.
I
+
( x) 8I6
7
III
17
17
+
+
IIII
17
Qty
04
F
Ø 8,0x20 mm
Qty
08
I
Ø 4,0x16 mm
Insert wood dowel ( ) into part ( ).F 17
17
(2x)
F
F

P.6
Step 4 Attach part (2) in the holes of parts (4) using screw (G) and a Phillips head
screwdriver.
Qty
04
G
Ø 4,0x40 mm
4
2
4
4
(4x)
G
G
GG
G
Step 3 Attach the Drawer Slide (17) into part (5) using Screw (I) and a Phillips head
screwdriver. Complete this step twice.
2x
(180º) 5
I
-
-
III
5
+
17
IIII
Insert wood dowel ( ) into part ( ).F 17
(16x) I
17
(4x)
F
F
Qty
08
F
Ø 8,0x20 mm
Qty
16
I
Ø 4,0x16 mm
+
17
17
17

Qty
06
C
Ø 3,5x30 mm
C
(6x)
C
(6x)
Qty
06
C
Ø 3,5x30 mm
Step 5 Attach parts (5) in the holes of part (2) using screw (C) and a Phillips head
screwdriver.
P.7
2
5C
5C
Step 6 Attach holes part (6) and (7) in the wood dowels of part (2) using screw (C) and a
Phillips head screwdriver.
7
6
2
C
C
C
C
C
C
C
C
C
C

C
(14x)
Qty
14
C
Ø 3,5x30 mm
P.8
Step 7 Attach Cam Bolt (A) into the holes in the part (1).
Qty
10
A
Ø 5,5x28 mm
1
Step 8 Attach parts 8, 16 to part 3 using Use screw (C) and a Phillips head screwdriver.
screw (E) to attach piece (J) into part 3.
A
( )
10x
A
A
A
A
A
A
A
A
A
A
16
CC
CC
CC
CC
CC
CC
CC
8
8
3
Qty
03
J
Qty
03
E
Ø 3,5x16 mm
E
J
( x)3
(180º)
3
E
J
E
J
E
J

E
H+E
EE
E
E
E
E
E
E
E
EE
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
H+E
H+E
H+E
H+E
H+E
H+E
H+E
9
10
B
Step 10
7
3
P.9
Step 9 Attach part (1) and (3) in the wood dowels of part (6) and (7) using screw (G) and
cam bolt (B) and Phillips head screwdriver.
B
B
1
(10x)
B
B
6
Qty
12
G
Ø 4,0x40 mm
(12x)
G
Qty
10
B
Attach part (9) and (10) using screw (E) and hardware (H) and Phillips head
screwdriver.
Qty
08
H
Qty
36
E
Ø 3,5x16 mm
E
E
H
(28x)
(8x)
G
G
G
G
G
G
G
G
G
G
G
G

Qty
24
C
Ø 3,5x30 mm
Step 11
P.10
Attach part (12) and (13) in the part (11) using screw (C)
and Phillips head screwdriver.
3x
Step 12
14
Insert part (14).
15
11
12
13
C
CC
C
C
C
C
Attach part (12) and (13) in the part (15)
using screw (C) and Phillips
head screwdriver.

P.11
Ø6mm
Back panel
Top
Top
Wall
1º 2º
Attach screw (C) into washer (L), securing
wall anchor (N), in the frame of superior
Drill your wall with a 6mm drill (not included) and
insert hardware (M), securing wall anchor (N) with
washer (L) and screw (C) in the wall.
C
L
N
C
L
M
panel unit.
N
L02
M01
N01
Step 13
Name and address information for the manufacturer responsible for the
anti-tip hardware and date of production can be found on the label on
the back of the furniture.
Qty
02
C
Ø 3,5x30 mm
WARNING
!
Serious or fatal crushing injuries can occur from tip-over. To help prevent tip-over, install tip
restraints per instructions. If using to support a television or monitor:
 For use with televisions weighing 35lbs (15.8Kg) or less and no wider than this product. Use with heavier
televisions may result in instability causing tip over resulting in death or serious injury.
 Death or serious injury may occur when children climb on audio/or video equipment furniture. Remote
control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result
the furnishing.
 Do not place TV near front the edge of the product.
To further reduce the risk of serious injury and death from tip-overs:
 Place heaviest items in the lowest compartments or drawers.
 Never allow children to climb or hang on drawers, doors or shelves.
 Never open more than one drawer at a time.
The use of tip-over restraints may only reduce, but not eliminate the risk of tip-over.
For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e., plaster, drywall,
concrete, etc). Mount to wood studs whenever possible. Note: if you are unsure about your wall type or
what mounting the method you should use, consult a qualified professional or your local hardware
store.
=
TELEVISION MAXIMUM LOAD 35LBS
ACORDING TO UL 1678
PRODUCT
PRODUCT WEIGHING 50LBS MAXIMUM
WEIGHING 25LBS MAXIMUM
=