Walker Edison BR9DRLEEDR User manual

Assembly Instructions
Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved.
BR9DRLEEDR
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Revised 11/2021
P.1

I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate
the appropriate hole for the dowel, place a small amount of glue in the hole and insert
the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts together,
place a small amount of glue on the end of the dowel before attaching parts together.
Wipe away excess glue immediately.
VI. A Phillips head screwdriver and hammer is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
General Assembly Guidelines
P.2

P.3
5
1
2
23
10
16
14
8
12
Top panel
1 0 pcs1
Left side panel
2 01 pcs
Right side panel
3 01 pcs
40 pcs1
5Middle panel 02 pcs
706 pcs
14 0 pcs2
9 0 pcs2
Large left drawer side
10 0 pcs2
Description QtyPart# Description QtyPart#
Large right drawer side
11 0 pcs6
12 06 pcs
Large drawer bottom
13 18 pcs
8 01 pcs
16 0 pcs4
15 0 pcs6
Back Panel
6 06 pcs
Parts List
Base panel
Drawer runner
Large Drawer front
Large backDrawer
Top crossbeam
Bottom front crossbeam
Bottom side crossbeam
Leg
Large front crossbeam
17 0 pcs2
18 0 pcs3
6
12
15
7
13
23 0 pcs3
Drawer bottom
Drawer front
24 0 pc1 s
Large middle panel
25 0 pc1 s
Central Leg
Description QtyPart#
19 0 pcs3
21 0 pcs3
20 0 pcs3
22 0 pcs4
Front crossbeam
Right idedrawer s
Left drawer side
Drawer back
18x
6x
3x
11
14
5
17
22
22
17
22
22
4
3
16
16
16
10
9
9
25
24
19
18
21
20
The side drawer with
WARNING LABEL,
nshould be mou ted
in highest drawer.

Philips head screwdriver required for assembly
(not included)
Hammer recommended for assembly
(not included)
Hardware List
A
B
C
D
E
F
G
H
J
K
L
M
Ø8*20mm Wooden dowel 36 pcs
Ø8*30mm Wooden dowel 127 pcs
Ø3,0*12mm Screw 30 pcs
Ø4,0*25mm Screw 36 pcs
Ø6mm 01 pc
Ø7,0*70mm Screw 05 pcs
-Hex Key 01 pc
- Handle 15 pcs
Washer 02 pcs
Ø4,0*30mm Screw 112 pcs
Ø4,0*40mm Screw 23 pcs
I- Glue 01 pc
Wall anchor 01 pc
-
N01 pc
1454 mm
P.4
-
-
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
‘H’ Profile
O46 pc
Nail
Ø8,0*8mm

Insert Wooden dowel (B) and glue (I)
1 3 4 (5), (9), 1 2 , 7 , (19), (20), (22) and (24).into part ( ), ( ), ( ), (8), (1 ), (1 ) (1 )
Insert Wooden dowel ( )A
and glue ( ) 13Iinto part ( ).
Step 1
6x 11
B
B
6x 12
B
B
A
A
13
18x
B
B
B5
B
B
3x 20
B
B
3x 19
B
Please assemble on
a clean soft surface
to avoid damage.
P.5
B
B
B
B
B
B
B
B
B
B
B
B
B
2x
B
B
B
B
17
B
B
B
4x 22
1
4
3
2x
B
B
B
B
B
24
B
B
B
B
B
B
8
B
9
2x
B91
Ø8*30mm
A36
Ø8*20mm
I01

Step 2 DD
13
Secure parts (13) to
part (3) and (4) with screw (D)
and screwdriver (not included).
P.6
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
3
13
13
13
13
13
13
13
13
4
3
TOP
TOP
Step 3
8
1
F
F
1
8
Secure part (8) to part (1) with screw (F) and screwdriver (not included).
Please assemble on
a clean soft surface
to avoid damage.
D16
Ø4,0*25mm
F02
Ø4,0*40mm

Step 4
Step 5
E
Secure part (5) to part (1) with screw (E) and screwdriver (not included).
P.7
E
EE
E
E
1
5
5
Secure part (17) to parts (5) with
screw (F) and screwdriver (not included) in the pre holes.
F
F
F
F
17
17
5
5
F
5
17
F
5
17
5
8
1
E06
Ø4,0*30mm
F04
Ø4,0*40mm

Step 7
Step 6
Secure parts (22) to part (24)
with screw (E) and screwdriver (not included).
P.8
24
E
E
24
17
17
17
Secure part (24) to parts (17) with screw (E)
and screwdriver (not included).
22
22
17
E
E
24
1
17
E
E
E02
Ø4,0*30mm
E02
Ø4,0*30mm

Step 9
Step 8
Secure parts (22) to part (24)
with screw (E) and screwdriver (not included).
P.9
1
Secure parts (1), (17), and (22) to part (4) with screw (E)
and screwdriver (not included).
E
E
EE
E
EE
4
22
22
17
17
E
E
22
22
24
E
E
E07
Ø4,0*30mm
E02
Ø4,0*30mm

Step 11
Step 10
P.10
Secure parts (1), (17) and (22) to part (3)
with screw (E) and screwdriver (not included).
E
E
17
3
22
22
E
EE
1
E
E
F
2x
F
Secure part ( ) to part ( ),9 s 16
Fwith screw ( ) and
screwdriver (not included).
16
16
9
9
F
E
17
E07
Ø4,0*30mm
F04
Ø4,0*40mm

Step 12
Step 13
Secure part ( ) to part ( ),s 10 s 16
Fwith screw ( ) and
screwdriver (not included).
Secure the part (1) to part (16),
Fwith screw ( ) and
screwdriver (not included).
F
F
P.11
F
F
16
16
10
10
F
F
10
10
16
16
9
F02
Ø4,0*40mm
F02
Ø4,0*40mm

25
Step 15
Step 14
P.12
G
H
G
2
G
H
G
G
G
G
Secure part (2) to part (16)
.with screw (G) and hex key (H)
2
16
16
16
Atach part 25( ) to part (2)
with screw (G) and hex key (H).
s (9) andSecure part (10) to part (2)
and attach with screw (E) and
screwdriver (not included).
E
E
E
E
E
E
E
E
E
E
E
9
10
9
10
Ø * 0mm7,0 7
G04
H01
Ø * 0mm7,0 7
G01
H01
E10
Ø4,0*30mm

Step 17
Step 16
Secure part ( ) to part ( )2 3 ,
(24) and (4) Fwith screw ( )
and screwdriver (not included).
4
P.13
F
F
F
F
F
F
F
F
F
23
24
F
14
N
1454mm
N
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
738mm
14
14
14
3
E
E
8
E
8
Name and
address of
the supplier
and date of
production.
Atach part (8) to part ( ) and (4) with screw (E)3
and screwdriver (not included).
Secure back panel (14) and part (N)
to body with nails (O)
and hammer (not included)
Ø8*8mm
4
3
F09
Ø4,0*40mm
O46
N01
E02
Ø4,0*30mm

Secure parts (13) to parts (5) and (24)
with screw (D) and screwdriver (not included).
P.14
D
13
5
13 13
13 13
13
Step 18
13
13
13
13
13
24
5
5
D20
Ø4,0*25mm

P.15
Step 20
Step 19
EEEE
E
E
11
12
6
7
6
15 6x
C
C
J
6
E
E
11
12
E
E
7
11
12
11
C
C
J
6x
Secure handle (J) with screw (C) and
screwdriver (not included), in the pre holes on the drawer front.
E48
Ø4,0*30mm
Secure part (11) and (12) to part (6)
with screw (E) and screwdriver (not included).
Insert part (15) and (7) betweenparts (11) and (12).
Secure part (7) with screw (E) and
screwdriver (not included).
C24
Ø3,0*12mm
J12

Step 22
Step 21
C
C
J
E
EE
EE
3x
E
E
E
E
18
19
20
23
21
20
19
21
20
19
18
E
19
21
3x
18
P.16
E
Secure handle (J) with screw (C) and
screwdriver (not included), in the pre holes on the drawer front.
Secure part (20) and (19) to part (18)
with screw (E) and screwdriver (not included).
Insert part (23) and (21) between parts (19) and (20).
Secure part (21) with screw (E) and screwdriver (not included). E24
Ø4,0*30mm
C06
Ø3,0*12mm
J03

Step 23
P.17
B
13
Insert ooden dowel ( ) into part ( )w B 13
to be the stop of the drawer.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
13
25
B18
Ø8*30mm

Step 24
Drawer Stop
Insert wood dowel ( ) on the inside of all drawers while drawer is inside the unit.B
Make sure dowel is flush with panel.
P.18
B
B
B
B
B
B
B
B
B
B
The side drawer with
WARNING LABEL,
nshould be mou ted
in highest drawer.
B18
Ø8*30mm

Step 25
Ø6mm
Top
Top
Wall
1º 2º
E
L
M
M
L
E
K
P.19
Back panel
=
=
WARNING
Serious or fatal injuries can occur from furniture tipping over. To prevent the
furniture from tipping over we recommend that it is permanently fixed to the wall.
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before installing, as different
wall materials may require different types of anchors.
Name and address information for the manufacturer responsible
for the anti-tip hardware and date of production can be found on
the label on the back of the furniture.
Atach screw (E) into washer (L),
securing wall anchor (M) at the top
middle part (1).
Drill your wall with a 6mm drill (not included)
and insert hardware (K), securing wall anchor
(M) gift asher (L) and screw (E) in the wall.
K01
E02
Ø4,0*30mm
L02
M01

Assembly Complete!
Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1.Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood)
3.Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.
Step 26
P.20
15
lbs
20
lbs
75
lbs