Walker Edison DM42CHMG User manual

Item#: DM42CHMG
Assembly Instructions
  
 

   P.1

Insert wooden dowel (A) to side panel (4,5) and back panel (2). Secure cam bolt (B) to side
panel (4,5).
Insert side panel (4,5) to back panel (2), then insert and secure cam lock (C) to back panel (2)
to lock it.

Use wrench (M) to secure bottom panel (3) to side panel (4,5) and back panel (2) with bolt (F).
Screw adjuster (J) to leg frame (7,8) as per diagram.

Use wrench (M) to secure back support frame (6) to leg frame (7,8) with bolt (D).
Use wrench (M) to secure leg frame (7,8) to bottom panel (3) with bolt (E).

Place rubber bumper (H) and sticker (K) over holes as per diagram.
Secure flat plate (I) to side panel (4,5) with screw (G).

Place top glass (1) carefully as per diagram.