Walker Edison WQ44CS User manual

Copyright © 2008, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Screw cam bolts (B) into stand top (1).
Screw cam bolts (B) into panel (2). Insert dowels (A) into slat (16).

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach slat (16) to panel (2) using cam bolts and dowels as guides. Insert cam locks (C) into
slat (16) and tighten with a screwdriver.
Attach support leg (15) to panel (2) using long bolts (D). Tighten long bolts (D) with wrench (R).
Screw cam bolts (B) into panels (2,3,4). Insert dowels (A) into panels (2,3,4).

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Screw cam bolts (B) into legs (5,6,7,8). Insert dowels (A) into legs (5,6,7,8).
Insert dowels (A) into shelf (9), panel (10) and slat (11). Screw cam bolts (B) into shelf (9).
Attach door stoppers (E) to shelf (9) using medium screws (F).

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C)
into panel (3) and tighten with a screwdriver.
Attach legs (7,8) to panel (4) using cam bolts and dowels as guides. Insert cam locks (C)
into panel (4) and tighten with a screwdriver.

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach panel (10) to panel (2) using cam bolts and dowels as guides. Insert cam locks (C)
into panel (10) and tighten with a screwdriver.
Attach shelf (9) to panel (10) using cam bolts and dowels as guides. Insert cam locks (C)
into panel (10) and tighten with a screwdriver.

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach the assembly from the previous step to the panel (3) assembly using cam bolts and
dowels as guides. Insert cam locks (C) into panel (2) and shelf (9) and tighten with a
screwdriver. Two cam locks (C) will be inserted into panel (2) and into shelf (9).
Slide back panel (12) into place. Back panel (12) will fit into the grooves of panels (2,3).

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach slat (11) to the frame assembly using cam bolt and dowel as guides. Insert cam
lock (C) into slat (11) and tighten with a screwdriver.
Insert cam locks (C) into panel (2), shelf (9) and slat (11). Attach the panel (4) assembly
to the frame assembly using cam bolts and dowels as guides. Tighten cam locks (C) with
a screwdriver.

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert cam locks (C) into the frame assembly. Attach top (1) to the frame assembly using
cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver.
Cover all visible cam locks (C) with stickers (T) as desired.

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Attach handles (G) to doors (13,14) using short bolts (H). Attach door stopper plates (J) to
doors (13,14) using small screws (K).
Attach door hinge (M) to door (13) using small screws (K). Attach door hinge (L) to door (14)
using small screws (K).

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert plastic pivots (N) into panel (2) and shelf (9).
Insert door hinge (L) into left bottom plastic pivot (N). Slide door (13) into place. Attach door
hinge (L) to door (13) using small screws (K). Insert door hinge (M) into right bottom plastic
pivot (N). Slide door (14) into place. Attach door hinge (M) to door (14) using small screws (K).

Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure back panel (12) to the frame assembly using plastic wedges (P) and large screws (Q).