Walker Edison BS64LAN1D User manual

P.2
GeneralAssembly Guidelines
I.Ensurethatallpartsandhardwareareavailablebeforebeginning assembly.
II. Followeachstepcarefullytoensure theproper assembly of this product.
21
III.Twopeoplearerecommendedfor easeintheassembly of this product.
IV.Thethreemain typesofhardware usedtoassemblethis product are: wood
dowels,screwsandbolts.
V.Theprovidedglueistosecurewooddowelsin place.Whenfirst inserting dowels,
locatetheappropriatehole forthedowel,placeasmallamount of glue inthe hole
andinsertthedowel.Wipeawayexcessglueimmediately.
Infutureassemblystepswhendowelsarenecessary toattachassembly parts
together,placeasmallamountofglueonthe endofthedowelbeforeattaching
partstogether.Wipeawayexcessglueimmediately.
VI.APhillipsheadscrewdriverisrequiredfortheassemblyofthis product.
VII.Power toolsshould notbeusedtoassemblethis product.
.Concealedhingesarethree-way adjustable.
Horizontal
byscrewadjustment In-and-Out
bylooseningthehinge-arm
mountingscrewor viacam
adjustment
Vertical
Viaslotsin themounting
plateorvia camadjustment
Door
Side panels Side panels Side panels
Door Door
VIII.Drillmaybeneededforsecuringproduct towall.
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.

P.5
Step 1
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
389
A
A
A
A
A
A
A
A
B
B
B
B
Insert wooden dowel (A) into parts (8,9)，then secure Cam bolt (B) to part (3) with Philips head
screwdriver as per diagram.

P.6
Step 2
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
2
2
6F
G
Using Bolt (F) attach part (6) into parts (1,2) with hex key (G) as per diagram.
Note: Do not fully tighten all bolts .

Repeat the last step as per diagram.

Using Bolt (T) attach part (3) to parts (6,13) with hex key (G) as per diagram.
Note：Fully tighten all bolts.

Using Screw (R) connecting both parts (7) to Nut (Q) with Wrench (X) ,then using Screw (S) attach
part (7) to parts (6,13) with Philips head screwdriver as per diagram.

Step 6
P.10
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
21 3
3
9
C
C
Using Cam lock(C) secure part (9) to part (3) with Philips head screwdriver as per diagram.

P.11
Step 7
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
21 3
38
C
C
Using Cam lock(C) secure part (8) to part (3) with Philips head screwdriver as per diagram.

P.12
Step 8
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
8
3
9
11
Put part (11) as per diagram.

Step 9
P.13
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
5
12
12
12
12
G
U
U
U
U
Using Bolt (U) attach part (5) to part (12) with Hex key (G) as per diagram.

Step 10
P.14
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
5
8
9
E
G
Using Screw (E) attach part (5) to parts (8,9) with Hex key (G) as per diagram.

Step 11
P.15
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
1
11
H
J
J
F
VG
Using bolt (F) attach Bracket (V) to part (1) with Hex key (G) . Then using screw (H) secure
plastic wedge (J) to part (11) with Philips head screwdriver as per diagram.

Step 12
P.16
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
D
Place sticker (D) cover the holes as per diagram .

Step 13
P.17
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.
Finished edge
4
89
P
P
Insert shelf support pin (P) into parts (8,9) as per diagram. Make sure you place the shelf
support pins (P) in the same level. So the shelf is not titled .Put part (4) into unit as per diagram.
Tilt and rest the adjustable shelf(4) onto the shelf support pins .

Using handle bolt (N) attach handle (M) to part (10) ,and using Screw (L) attach Europe Hinge (AA)
to part (10) with Philips head screwdriver as per diagram.

Using Screw (L) attach Europe Hinge (AA) to part (8) with Philips head screwdriver as per diagram.

Using Screw (L) attach Europe Hinge (AA) to part (9) with Philips head screwdriver as per diagram.