Walker Edison W58SGRD User manual

.1
Assembly Instructions
Item # : W58SGRD
Revised 27/05/2019 (E)
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
lease visit our website for the most current instructions, assembly tips, report damage,
or request parts. .alkeredison.com
Walker Edison
TM

.2
Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A hillips head screwdriver is required for the assembly of this product.
VII. ower tools should not be used to assemble this product.
VIII. Drill may be needed for securing product to wall.

.3
arts List
1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
2
10
8
3
5
4
6
6
7
9
11
13
12
14
15
16
17
15
17
18
19
20
21

A
B
C
D
E
F
G
J
K
pcs
pcs
L
M
N
30 pcs
Wooden dowel
Ø8x30mm
Ø6x35mm Cam bolt 21
Ø6x50mm 10
Bolt
pcs
pc
pcs
1
lastic wedge 12
Screw
Ø3x17mm
M 4 Hex Key
12
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
hilips head screwdriver required for assembly
(not included)
.4
pcs
Cam lock
Ø15x11mm 21
pcs
Ø30mm 21
Sticker
pcs
Ø6x12mm 14
Bolt
pcs
2
Handle
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
pcs
12
Shelf support pin
pcs
Ø4x22mm 4
Bolt
Q
R
Slate
pcs
Ø6x12mm 8
Bolt
pcs
4
ulley
T
pcs
56x27x27mm 7
Connector
U 1 pc Glue tube
pcs
4
pcs
8
Screw
Ø4x12mm

.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
A
A
A
A
C
C
C
C
C
C
C
C
C
C
C
1
8
Insert wooden dowel (A) to part (8) ,using cam bolt (C) secure part (1) with Philips head
screwdriver as per diagram.

.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
AA
AA
A
A
A
A
AA
AA
A
A
10
11 12
13
Insert wooden dowel (A) to parts (10,11,12,13) .

Step 3
.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
A A
C
C
C
C
CCC
C
C
C
7
920 21
Insert wooden dowel (A) to parts (20,21). using cam bolt (C) secure parts (7,9,20,21) with Philips
head screwdriver as per diagram.

Step 4
.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
BB
BB
11 13
20 21
Using cam lock (B) secure parts (11,13) to parts (20,21) with Philips head screwdriver as per
diagram.

.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5 21 3
B B
BB
79
10
12
Using cam lock (B) secure parts (7,9) to parts (10,12) with Philips head screwdriver as per
diagram.

.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 6 21 3
B
B
7
8
9
20
21
Using cam lock (B) secure part (8) to parts (7,9,20,21) with Philips head screwdriver as per
diagram.