Walker Edison BS68CLHUT User manual

P.1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 02/12/2019 (E)
®
Walker Edison
TM
Item # : BS68CLHUT
Assembly Instructions

P.2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
. Ensure that all parts and hardware are available before beginning assembly.
. Follow each step carefully to ensure the proper assembly of this product.
21
. Two people are recommended for ease in the assembly of this product.
V. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
V . A Phillips head screwdriver is required for the assembly of this product .
V . Power tools should not be used to assemble this product .
V . Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door

P.3
Parts List
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
1
x 2
2
3
4
4
5
7
6
8
9
9
9
9
10
10 11
11
12
12
13
13
14
17
16
19 18
15

P.4
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Ø8x30mm Wooden dowelA 20 pcs
Ø6x35mm Cam boltB 18 pcs
Ø15x9mm Cam lock
C
8 pcs
Sticker
D
18 pcsE
F
G
H
J
K
L
M
Shelf support pin
N
8 pcs
P
Q
Ø3x17mm ScrewR 14 pcs
S
Ø15x11mm Cam lock 10 pcs
Handle 2 pcs
Ø4x32mm Screw 10 pcs
Europe hinge 6 pcs
Ø4x12mm Screw 2 pcs
Ø4x25mm Screw 2 pcs
Plastic strap 2 pcs
Nut 2 pcs
T
U
V
W
Ø3.5x14mm Screw 36 pcs
Screw 4 pcsØ6x30mm
Ø6x12mm Bolt 12 pcs
M4 Hex Key 1 pc
Plastic wedge 14 pcs
Philips head screwdriver required for assembly
(not included)
Screw 4 pcsØ6x50mm
Ø4x22mm Handle Bolt 4 pcs

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
X
Y Ø3x12mm Screw 24 pcs
Glue tube 1 pc
Drawer slider 2 sets
*Note: This piece comes preassembled for
shipping purposes and must be disassembled
to complete the desk assembly.
Z

P.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
x 2
A
A
A
AAA
A
A
3
4
19
Insert wooden dowel (A) into parts (3,4,19) as per diagram.

Step 2
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
A
A
A
A
A
A
A
A
B
B
BB
B
B
5
7
Insert wooden dowel (A) into parts (5,7) , then secure cam bolt (B) into parts (5,7) with Philips
head screwdriver as per diagram.

Slider arm
Slider bracket
Slider arm
Slider bracket
Step 3
P.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Z
Z
Separate the slide bracket from the slide arm as per diagram.

P.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 4
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Z
Z
Z
Z
5
7
Using screw(Y) secure drawer slider arm (Z) to parts (5,7) with Philips head screwdriver
as per diagram.

P.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5
Y
Y
Y
Y
Y
Y
x 2
Z
Z
16
18
Using screw(Y) secure drawer slider bracket (Z) to parts (16,18) with Philips head screwdriver
as per diagram.