Walker Edison B48CLY User manual

P.1
AssemblyInstructions
Item# : B48CLY
Revised 10/07/2019 (E)
Copyright
201
9b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. .alkeredison.com
alker Edison
TM

P.2
Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
VIII. Drill may be needed for securing product to wall.

P.3
PartsList
1
Copyright
201
9b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
9
3
2
4
5
7
8
6
3
10

A
B
C
D
E
F
G
J
K
pcs
L
M
N
4pcs
Wooden dowel
8x30mm
6x35mm Cambolt 4
pcs
pc
pcs
1
Plastic wedge 3
Screw
3x17mm
M4 HexKey
3
HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
Philipshead screwdriverrequired forassembly
(not included)
P.4
pcs
Camlock
15x11mm 4
pcs
30mm 4
Sticker
pcs
6x12mm 2
Bolt
Copyright
©
201
9b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
pcs
4
Shelf support pin
1pc Glue tube
pcs
6x25mm 12
Bolt
pcs
Screw
4x38mm 2

P.5
Copyright
2019
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 1
C
C
1
Using cam bolt (C) secure part (1) with Philips head screwdriver as per diagram.

P.6
Copyright
2019
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 2
A
A
A
A
6
8
C
C
Insert wooden dowel (A) into parts (6,8) and screw cam bolt (C) into designated hole on the
side panel as per diagram.

Step 3
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
EG
2
10
3
3
4
5
Using bolt (G) secure parts (4,5) into parts (2,3,10 ) with hex key (E) as per diagram.

Step 4
P.8
Copyright
2019
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
6
8
B
B
21 3
Attach and align the bottom panel (8) to side panel (6) using cam lock (B).

P.9
Copyright
2019
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 5
K
5
8
Using screw (K) secure part (5) into part (8) with Philips head screwdriver as per diagram.

P.10
Copyright
2019
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 6
5
6
8
9
Put part (9) into parts (5,6,8) as per diagram.