Walker Edison BTOTMM User manual

P.1
AssemblyInstructions
Item# : BTOTMM
Revised 28/06/2019
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com
Walker Edison
TM

InstructionManual
IMPORTANTINFORMATIONMUSTREADBEFOREASSEMBLINGPRODUCT
-Follow theinformation on thewarningsappearingonthe upper bunk end structure and on the carton.
WARNING
!
Donotremovewarninglabelfrom bed.
-Useonlyamattress whichis 75-76"Lx 37.5-38.5"Wx9"Honupperbunk, 75"-76" long and37.5-38.5"Wwide on
lower bunk.
-ReplacementParts--Replacementparts, including additionalguardrails, maybe obtained fromany of Walker
EdisonFurniture’dealers orby contactingWalkerEdison Furnitureonlineat www.walkeredison.com.
-Follow theinformationonthe warningsappearingontheupperbunkendstructure and on the carton.
DONOTremovewarninglabel from bed.
-Always usethe recommended sizemattressor mattresssupport, orboth, tohelpprevent the likelihood of
entrapment orfalls.
-Surfaceof mattress mustbe at least5in. (127mm) belowtheupper edgeofguardrails. Mattress must
notexceed amaximumthickness of 9inches.
-DONOTallow childrenunder6yearsofagetousethe upper bunk.
-Periodicallycheckandensure that the guardrail, ladder,andothercomponentsareintheirproper position,
freefromdamage,andthat allconnectorsaretight.
-DONOTallow horseplay onorunderthe bedandprohibit jumpingonthe bed.
-Alwaysusethe ladderforenteringand leavingthe upper bunk.
-DO NOTusesubstitutepars. Contact the manufactureror dealer for replacement parts.
-Useofanightlightmayprovide added safetyprecaution forachildusing the upper bunk.
-Alwaysuseguardrailsonbothlongsides of the upper bunk. If thebunkbedwill be placed next tothe wall,
theguardrailthatrunsthefull lengthofthebed shouldbeplacedagainstthewall toprevent entrapment
betweenthe bedandwall.
Theuseof waterorsleepflotation mattresses is prohibited.
-
STRANGULATIONHAZARD -Neverattachor hangitems toanypart of the bunk bed that are not designed
-for usewiththebed; for example,butnotlimited to,hooks, beltsandjumpropes.
Prohibitmorethan one persononupper bunk.
-
Keeptheseinstructionsfor future reference.
-
P.2
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.

PartsList
14
14
7
14
14
1
3
2
4
3
54
5
1
3
2
3
13 15
16
8
13
9
12 12
12
12
11
11
11 1010
P.3
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
6

The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
HardwareList
Bolt 53 pcs
AØ1/4"x15mm
B
C
D
E
F
G
H
J
58 pcs
3pcs
3pcs
6pcs
6pcs
8pcs
88 pcs
42 pcs
Small washer
Ø16mm
Ø18mm
Ø5/16"x57mm
Ø1/4"x32mm
Large washer
Bolt
Bolt
Plastic end cap
Washer
Plastic tab lock
Plastic link
P.4
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.

The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
HardwareList
K22 pcs
L 1 pc
Hexkey
M 1 pc
M4mm
M5mm Hexkey
Plastic plug
P.5
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
N6pcs
Ø1/4"x57mm Bolt

P.6
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.

Step 1
1
3
21
3
2
4
3
54
3
5
P.7
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
Assembly the four support posts by combining parts (2, 3) and (1), then parts (5, 3) and (4) as shown
in the illustration.

Step 2
A
A
B
L
A
BA
B
B
1
3
2
1
3
2
4
3
5
4
3
5
P.8
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
Secure these parts together using screws (A) and small washers (B). Be sure to tighten firmly with
hex key (L).

Using bolt (A) secure small washer (B) to part (14) into parts (1,4) , using bolt (A) secure small washer (B)
to part (14) into parts (2,5) with hex key (L).

Step 4
B
A
L
12
12
12
12
8
9
P.10
Copyright
201
9, by Walker Edison Furniture Co., LLC. All rightsreserved.
Attach legs (12) to the lower cross bars using screws (A) and small washers (B) as shown in the illustration.
Tighten screws using hex key (L).