Walker Edison AF24NYM2D User manual

P.1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 29/11/2019 (I)
®
Walker Edison
TM
Item # : AF24NYM2D
Assembly Instructions

P.2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
. Ensure that all parts and hardware are available before beginning assembly.
. Follow each step carefully to ensure the proper assembly of this product.
21
. Two people are recommended for ease in the assembly of this product.
V. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
V . A Phillips head screwdriver is required for the assembly of this product .
V . Power tools should not be used to assemble this product .
V . Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door

P.3
Parts List
1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
2
3
4
5
5
6
9
10
13
13
11
11
12
8
7

P.4
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
Ø8x30mm Wooden dowelA 6 pcs
Ø6x35mm Cam boltB 4 pcs
Ø15x11mm Cam lockC 4 pcs
Ø30mm StickerD 4 pcs
Ø6x50mm ScrewE 4 pcs
F 4 pcs
Ø5x12mm ScrewG
Ø6x25mm BoltH
4 pcs
Ø4x45mm ScrewJ
8 pcs
Plastic wedgeK
3 pcs
Ø3x17mm ScrewL
6 pcs
M4 Hex KeyM
6 pcs
N
1 pc
Europe hinge
P
4 pcs
Ø3.5x14mm Screw
Q
24 pcs
Velcro strap
R
1 pc
Nut
S
1 pc
Ø4x25mm Screw
T
1 pc
Ø4x15mm Screw
U
1 pc
Glue tube 1 pc
Shelf support pin

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
4
A
A
A
A
3
2
A
A
Insert wooden dowel (A) into parts (2,3,4) as per diagram.

P.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
1
12
B
B
B
B
J
J
J
Secure cam bolt (B) into part (1), then using screw (J) attach part (2) to part (1) with Philips
head screwdriver as per diagram.

Step 3
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
1
4
C
C
Using cam lock(C) secure part (4) to part (1) with Philips head screwdriver as per diagram.

Step 4
P.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
1
3
C
C
Using cam lock(C) secure part (3) to part (1) with Philips head screwdriver as per diagram.

Step 5
P.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
5
5
Put part (5) as per diagram.

P.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 6
6
Put part (6) as per diagram.