Walker Edison BR2DRLEENS User manual

Assembly Instructions
BR2DRLEENS
Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved.
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Revised 11/2021
P.1

I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate
the appropriate hole for the dowel, place a small amount of glue in the hole and insert
the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts together,
place a small amount of glue on the end of the dowel before attaching parts together.
Wipe away excess glue immediately.
VI. A Phillips head screwdriver and hammer is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
VIII. Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers, we recommend
applying wax to the wooden guide rails.
1. Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact
when opening and closing the drawer. (Wax should be room temperature, do not melt the wax
onto the wood)
3. Wax should be applied every few months for the first year and then only when needed after
that to keep the drawers sliding smoothly.
General Assembly Guidelines
P.2

Top panel
10 pcs2
Left side panel
201 pcs
Right side panel
301 pcs
40 pcs1
5Middle panel 01 pcs Drawer Right Side
Description Qty
Part# Description Qty
Part#
Drawer Left Side
19 0 pcs2
20 0 pcs2
801 pcs
2x
602 pcs
Parts List
1
3
1
8
9
910
10
16
2
4
5
6
13
13
13
13
14
16
16
16
Base panel
Drawer front
Top crossbeam
Drawer botton
23 02 pcs
21 0 pcs2
Drawer back
90 pcs2
Bottom Front crossbeam
10 0 pcs2
Bottom side crossbeam
13 0 pcs4
Drawer runner
14 01 pcs
Back Panel
16 0 pcs4
Leg
23
20
19
21
P.3

Philips head screwdriver required for assembly
(not included)
Hammer recommended for assembly
(not included)
Hardware List
A
B
C
D
E
F
G
H
J
K
L
Ø8*20mm Wooden dowel 08 pcs
Ø8*30mm Wooden dowel 46 pcs
Ø3,0*12mm Screw 04 pcs
Ø4,0*25mm Screw 08 pcs
-02 pcs
Ø7,0*70mm Screw 04 pcs
-Hex Key 01 pc
- Handle 02 pcs
Ø8*8mm Nail 26 pcs
Ø4,0*30mm Screw 45 pcs
Ø4,0*40mm Screw 14 pcs
I- Glue 01 pc
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
M-04 pcs
Plastic cap
Slap hole
P.4

Insert ooden dowel ( )w B and glue (I) into
part (1), (3), (4), (5), (8), (9), (19), and (20).
Insert ooden dowel ( )w A
and glue (I) 13into part ( ).
Step 1
2x
4
3
1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
8
B
B
BB
A
A
13
4x
5
Step 2
B
Please assemble on
a clean soft surface
to avoid damage.
E
E
E
E
E
E
1
1
3
Secure part (1) and (8) to part (3), attach part (1) to part (3) with screw (E)
.and screwdriver (not included)
E
8
B38
Ø8*30mm
A08
Ø8*20mm
I01
P.5
9
2x
BB
2x
BB
2x
20
19
E06
Ø4,0*30mm

Step 3
E
E
1
1
4
E
Secure part (1) and (8) to part (4),
attach part (1) to part (4) with screw (E)
.and screwdriver (not included)
Step 4
3
Secure part ( ) to part ( ), with screw ( )5 1 E
and screwdriver (not included).
E
E8
4
1
1
3
5
E
E
E
E
41
1
3
5
Assembly instruction shows
drawers in the right side
Drawers can be fitted left hand or right hand.
5
4
1
1
3
P.6
E06
Ø4,0*30mm
E03
Ø4,0*30mm

Step 5
Step 6
9
16
16
F
F
2x
F
F
9
10
10
Step 7
Secure part ( ) to part ( ), with screw ( ) and screwdriver (not included).10 s 16 F
F
F
10
10
9
16
16
16
16
Secure part (10) to parts (16),
Fwith screw ( ) and
screwdriver (not included).
F
F
F
Secure part ( ) to part ( ), with screw ( )9 s 16 F
and screwdriver (not included).
P.7
9
F02
Ø4,0*40mm
F04
Ø4,0*40mm
F02
Ø4,0*40mm

Step 9
Step 8
2
Ø * 0mm7,0 7
Secure part (2) to part (16)
.with screw (G) and hex key (H)
Secure part ( ) to part ( ),2 3 (4) and (5)
Fwith screw ( ) and screwdriver (not included).
G
G
G
G
G
H
P.8
2
F
4
5
3
F
F
F
F
F
Please assemble on
a clean soft surface
to avoid damage.
4
2
F
2
16
16
16
G04
H01
F06
Ø4,0*40mm

Step 11
Step 10
Secure part ( ) to part ( ) with screw ( )5 2 E
and screwdriver (not included).
P.9
2
Secure part (10) tos (9) and
part (2) with screw (E) and
screwdriver (not included).
E
E
E
E
E
E
E
E
E
EE
E
E
2
5
9
10
10
9
E08
Ø4,0*30mm
E03
Ø4,0*30mm

Step 12
D
D
D
D
D
D
D
D
13
13
13
13
B
B
B
B
D
13
B
Insert ooden dowel ( ) into part ( )w B 13
to be the stop of the drawer.
13
13
Secure part ( ) to part ( ) and ( ) with screw (D)s 13 5 3
and screwdriver (not included).
3
5
5
Step 13
P.10
B04
Ø8*30mm
D08
Ø4,0*25mm

Step 15
Step 14
E
E
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
14 L
Name and address of
the supplier and date of
production.
Secure part (8) to part (3) and (4) with screw (E)
and screwdriver (not included).
L
Secure back panel (1 )4 as shown at above view
L ato body with nails ( ) nd hammer (not included).
E
Ø * mm8 8
P.11
8E
4
3
E03
Ø4,0*30mm
L26

P.12
Step 17
Step 16
C
C
J
E
EE
EE
2x
E
E
E
E
6
19
20
23
21
20
19
21
20
19
6
E
19
21
2x
Secure handle (J) with screw (C) and screwdriver (not included),
in the pre holes on the drawer front.
Secure part (20) and (19) to part (6)
with screw (E) and screwdriver (not included).
Insert part (23) and (21) between parts (19) and (20).
Secure part (21) with screw (E) and screwdriver (not included).
6
E
E16
Ø4,0*30mm
C04
Ø3,0*12mm
J02

Step 19
Step 18
B
B
Drawer Stop
Insert wood dowel ( ) on the inside of all drawers while drawer is inside the unitB ,
after having passed the dowel added the drawer runner.
Make sure dowel is flush with panel.
B
K
K
K
Insert the cap (K) into the screw head.
P.13
There are colors options
for the caps, choose the
cap according to the color
of your item.
K02
B04
Ø8*30mm

Step 20
Assembly Complete!
75
lbs
Step 21
20
lbs
20
lbs
20
lbs
M
Insert the ( ) into the .slap hole M niche
M
M
P.14
There are colors options
slapsfor the , choose the
slap according to the color
of your item.
M04