Walker Edison BU60BALWM User manual

P.2
GeneralAssembly Guidelines
I.Ensurethatallpartsandhardwareareavailablebeforebeginning assembly.
II. Followeachstepcarefullytoensure theproper assembly of this product.
21
III.Twopeoplearerecommendedfor easeintheassembly of this product.
IV.Thethreemain typesofhardware usedtoassemblethis product are: wood
dowels,screwsandbolts.
V.Theprovidedglueistosecurewooddowelsin place.Whenfirst inserting dowels,
locatetheappropriatehole forthedowel,placeasmallamount of glue inthe hole
andinsertthedowel.Wipeawayexcessglueimmediately.
Infutureassemblystepswhendowelsarenecessary toattachassembly parts
together,placeasmallamountofglueonthe endofthedowelbeforeattaching
partstogether.Wipeawayexcessglueimmediately.
VI.APhillipsheadscrewdriverisrequiredfortheassemblyofthis product.
VII.Power toolsshould notbeusedtoassemblethis product.
.Concealedhingesarethree-way adjustable.
Horizontal
byscrewadjustment In-and-Out
bylooseningthehinge-arm
mountingscrewor viacam
adjustment
Vertical
Viaslotsin themounting
plateorvia camadjustment
Door
Side panels Side panels Side panels
Door Door
VIII.Drillmaybeneededforsecuringproduct towall.
Copyright
2020
, by Walker Edison Furniture Co., LLC. All rightsreserved.

Insert wooden dowel (A) into parts (4,5,12,13,14,22) as per diagram.

Insert wooden dowel (A) into part (3), secure cam bolt (D) into parts (1,3,4,5) with Philips head
screwdriver as per diagram.

Pick up the slider arm (Z) and separate the slide Runner for the following Steps. Extend
the Slide .Runner all the way forward,press the plastic release lever of the alider arm up
and pull the Slide Runner Complete out .

Using screw (L) attach part (Z) into parts (4,5) with Philips head screwdriver as per diagram.

Using screw (L) attach part (Z) into parts (12) , then using screw (L) attach part (Z) into
parts (18,19) with Philips head screwdriver as per diagram.