Walker Edison BU62LAU4D User manual

Securely screw the cam bolts (B) on parts (1 and 2) with a Philips screwdriver as per diagram .

Insert wooden dowels into parts (3,4). Securely screw the cam bolts (B) on parts (3 and 4) with a
Philips screwdriver as per diagram.

Insert wooden dowels into parts (5,6,7). Securely screw the cam bolts (B) on parts (6 and 7)
with a Philips screwdriver as per diagram.

Using screw (N) attach the leg (10) to bottom panel (2) with a Philips screwdriver as per
diagram. Please kindly noted the legs placed the same direction as the AI shows .

Using cam locks(C) attach part (3) to part(5) and then using cam locks(C)attach the other side
of part (3) to part (6)with a Philips screwdriver as per diagram.

Using cam locks(C) attach part (4) to part(5) and then using cam locks(C)attach the other side
of part (4) to part (7)with a Philips screwdriver as per diagram.

Using cam locks (C) attach parts(5,6) to part (2) with a Philips screwdriver as per diagram.

Using cam locks (C) attach parts(5,7) to part (2) with a Philips screwdriver as per diagram.

Align and attach part(1) with parts(6,7) with cam locks (C) with a Philips screwdriver as per
diagram.

Using screw (E) secure part(11) to parts (2,3,5);part (12)to parts (2,4,5) with a Philips
screwdriver as per diagram.

Attach parts(13,14) with part (17) as per diagram

Using screw (E) secure part (13) to parts (2,6,7,11,12),part (14) to parts(1,6,7,11,12) with Philips
screwdriver as per diagram.

Using sticker (F) cover the cam lock holes as per diagram.

Insert shelf support pin (D) into parts (5,6,7) as per diagram .

Make sure you place the four shelf pins in the same level so the shelf is not tilted .
Tilt and rest the adjustable shelves (8,9) onto the shelf support pin (D)as per diagram .