Walker Edison CHW User manual

General Assembly Guidelines
I. Insure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to insure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main types of hardware used to assemble this product are bolts, washers and
screws.
V. A Phillips head screwdriver is required for the assembly of this product.
VI. Power tools should not be used to assemble this product.
P.2

Hardware List
Bolt
Bolt
Bolt
Screw
Screw
Wrench

Attach seat frame (2) to chair back (1) using bolt (C), spring washer (D) and washer (E) at the center point and
bolts (A), spring washers (D) and washers (E) in the corners. Tighten all bolts (A,C) with wrench (H).
Attach crossbars (6,7) to crossbar (5) using dowels as guides.

Attach crossbars (6,7) with crossbar (5) to chair back (1) using dowels as guides.
Attach legs (3,4) to the chair assembly using bolts (B), spring washers (D) and washers (E). Tighten all bolts (B)
with wrench (H).

Secure crossbar (5) to crossbars (6,7) using screws (G). Secure crossbars (6,7) to chair legs using screws (F).
Attach seat (8) to seat frame (2) using screws (G).