Walker Edison W60CMP User manual

P.1
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 02/03/2020 (I)
®
Walker Edison
TM
Assembly Instructions
Item # : W60CMP

P.2
General Assembly Guidelines
. Ensure that all parts and hardware are available before beginning assembly.
. Follow each step carefully to ensure the proper assembly of this product.
21
. Two people are recommended for ease in the assembly of this product.
V. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
V . A Phillips head screwdriver is required for the assembly of this product .
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

P.3
Parts List
1
2
3
4
4
5
5
6
6
7
8
9
10
16
11
12
12
13
13
14
15
17
18
19
16
15
17
18
20
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

P.4
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
Ø8x30mm Wooden dowelA 38 pcs
Ø6x35mm Cam boltB 30 pcs
Ø15x11mm Cam lockC 22 pcs
Ø15x9mm Cam lockD 8 pcs
Ø30mm StickerE 34 pcs
Ø6x50mm BoltF 16 pcs
M4 Hex KeyG 1 pc
Ø5x16mm Shelf support pinH 8 pcs
Ø3x17mm ScrewJ 12 pcs
Ø3x12mm Screw
K
24 pcs
Handle
L
2 pcs
Ø4x22mm Handle Bolt
M
4 pcs
Glue tube
N
1 pc
Right Glide Track
P
2 pcs
Q
Ø4x38mm Screw 8 pcs
Plastic wedge 12 pcs
R
S
T
U
Left Glide Runner
Left Glide Track
Right Glide Runner
2 pcs
2 pcs
2 pcs
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

P.5
Step 1
1
B
B
B
B
B
B
B
B
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Secure cam bolt (B) into part (1) with Philips head screwdriver as per diagram.

P.6
Step 2
10
14
FF
G
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Using screw (F) attach part (10) into part (14) with hex key (G) as per diagram.

Step 3
P.7
54
A
A
A
A
A
A2X
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Insert wooden dowel (A) into parts (4,5) as per diagram.

Step 4
P.8
22
33
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Insert wooden dowel (A) into parts (2,3) ,then secure cam bolt (B) into parts (2,3) with Philips head
screwdriver as per diagram.

Step 5
P.9
A
A
A
A
AA
11 12
13
2X
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Insert wooden dowel (A) into parts (11,12,13) as per diagram.

2
3
11
11
L
L
L
L
L
R
T
T
R
L
L
L
L
L
L
L
Step 6
P.10
Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
Finished edge
Finished edge
Using screw (L) attach part (R) to parts (2,11)，part (T) to parts (3,11) with Philips head
screwdriver as per diagram.