Walker Edison AF30BELMC User manual

P.1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 30/12/2019 (E)
®
Walker Edison
TM
Item # : AF30BELMC
Assembly Instructions

P.2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product .
VIII. Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door

P.3
Parts List
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
1
2
3
2
4
9
5
6
8
7
7

P.4
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
Ø8x30mm Wooden dowelA 12 pcs
Ø6x32mm Cam boltB 12 pcs
Ø15x9.5mm Cam lockC 12 pcs
StickerD 12 pcs
E
F
G
H
J
K
L
M
Shelf support pin
N
4 pcs
P
Q
R
S
1 pc
Ø4x18mm Handle Bolt 4 pcs
Handle 2 pcs
Europe hinge 4 pcs
Ø4x12mm Bolt 24 pcs
Screw 14 pcs
Ø3x16mm Screw 1
Ø4x25mm Screw 1
Plastic strap 1
Nut 1
Door stopper 1 pc
pc
pc
pc
pc
T
U
V
W
X
M 4 Hex Key
Lock washer 12 pcs
Flat washer 12 pcs
Ø6x30mm Bolt 4 pcs
Ø6x15mm Bolt 8 pcs
Ø3x15mm Screw 2 pcs
Glue tube 1 pcY
4 pcsPlate

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
3
3
B
B
B
B
B
B
B
B
Secure cam bolt (B) into part (3) with Philips head screwdriver as per diagram.

P.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
x 2
1
2
A
A
A
A
B
B
B
B
Q
R
Insert wooden dowel (A) into part (2), secure cam bolt (B) into part (1) ,using screw (Q) attach
stopper (R) to part (1) with Philips head screwdriver as per diagram.

Step 3
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
x 2
7
A
A
F
F
G
G
H
H
W
X
X
Insert wooden dowel (A) to part (7),then using bolt (F) with lock washer (H),flat washer (G)secure
plate (X) to part (7) with hex key (W) as per diagram.

Step 4
P.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
1
2
C
C
Using cam lock(C) secure part (2) to part (1) with Philips head screwdriver as per diagram.

P.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5 21 3
1
2
C
C
Using cam lock(C) secure part (2) to part (1) with Philips head screwdriver as per diagram.

P.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 6 21 3
2
2
3
C
C
C
C
Using cam lock(C) secure part (3) to part (2) with Philips head screwdriver as per diagram.