Walker Edison D51L29 User manual

Assembly Diagram
Model No. D51L29
1
For our most up to date assembly instructions or to request missing, lost, or broken parts, or for any other
customer service issue, please visit our website at www.walkeredison.com or call us toll free at 877-207-5906.
Important
*Note: These parts come preassembled for shipping purposes and must be disassembled for assembly
1
wrench
A
B
C
D
E
F
G
H*
I*
J
K
L
M
N
O
P
Q
R
S
T
small screws 8
medium bolts 16
4
16
4
8
2
2
L = 1, R = 1
2
1
1
4
2
2
2
1
1
1
large bolts
rubber suction
cups
CPU feet
desk feet
keyboard tray
bracket
keyboard tray
arm
keyboard tray
support frame
desk glass
middle glass
keyboard tray
glass
desk leg
cross bar
cross bar for
frame keyboard
side
cross bar for
frame non key-
board side
CPU stand
middle frame
keyboard tray
frame
Component List

2
Step 1
Attach middle frame (S) to left side of the desk at leg (N) using large bolts (D).
Assembly Diagram Model No. D51Z29Model No. D51L29
For the right side of the desk, attach middle frame (S) to leg (N) and upper right cross bars (Q) using
large bolts (D). Attach final leg (N) to right upper cross bars (Q) using medium bolts (C).
Now attach legs (N) to to cross bar (O) using medium bolts (C).
Step 3
Step 4
Screw desk feet (G) into the bottom
of desk legs (N).
Step 2
For the left side of the desk, take leg (N) and screw in the medium bolts (C) into and through the
leg (N) and into the left upper cross bar (P). Now take the cross bar (O) and screw it into legs (N)
using medium bolts (C).
P

Assembly Diagram Model No. D51L29
3
Step 5
Step 7
Disassemble the keyboard tray brackets (H) and the keyboard tray arm (I)
by pressing down the small lever and pulling up.
H
I
Secure rubber suction cups (E) to the table by placing the small ends into the holes on the top of the
desk frame.
Screw in keyboard support tray frame (J) between left upper cross bars (P) using medium bolts (C).
Step 6
P
P
O

Assembly Diagram Model No. D51L29
4
Push down on small
lever to allow keyboard
bracket to slide along
keyboard arm.
Step 9
Place rubber suction cups (E) on keyboard tray frame (Q) and place keyboard tray glass (M) on top of
the rubber suction cups. Now take the keyboard tray and slide it into the keyboard tray arm (I). Find
desk glass (K) and (L). Place the glass on top of the desk frame according to the above illustration.
To construct the keyboard tray you need to take the keyboard tray brackets (H) and secure them to the
keyboard frame (T) using small screws (B) as shown in the illustration.
*Note: Ensure the open end of keyboard tray arm (I) faces front side of desk.
Step 8
T

Assembly Diagram Model No. D51L29
5
Step 10
Final Assembly
R
F
FF
F
Find the CPU stand (R) and screw
in the CPU feet (F) into the under
side of the frame.
For our most up to date assembly instructions or to request missing, lost, or broken parts, or for any other customer
service issue, please visit our website at www.walkeredison.com or call us toll free at 877-207-5906.