Walker Edison W60CMC User manual

Item # : W60CMC
Assembly Instructions
  

Revised 03/2018
   P.1

P. 2
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.

P. 3
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Parts List

P. 4
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Philips head screwdriver required for assembly
(not included)
Hardware List

P. 5
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
Step 2
Insert wooden dowel (A) into side panels (3) and middle side panel (5,6). Secure cam bolt (B)
to middle side panel (5,6) and top panel (1).
Insert wooden dowel (A) into middle cross bar (4). Secure cam bolt (B) to drawer front panels
(11,15). Attach knob (G) to drawer front panels (11,15) by using handle screw (H).

P. 6
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 3
Step 4
Secure cam bolt (B) to both sides of bottom panel (2).
Insert wooden dowel (A) into base cross bar (21). Use wrench (S) to secure legs (20) with bolt
(J), spring washer (L), washer (M), locking plate (N). Secure cam bolt (B) to legs (20).

P. 7
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5
Step 6
Insert the base cross bar (21) into legs (20), then insert and secure cam lock (C) into base
cross bar (21) to lock it.
Insert the legs (20) into bottom panel (2), then insert and secure cam lock (C) into legs (20) to
lock it. Use wrench (S) to secure legs (20) to bottom panel (2) with bolt (K), spring washer (L),
and washer (M).

P. 8
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 7
Step 8
3
Insert middle cross bar into middle side panel (5,6), then insert and secure cam lock (C) into
middle cross bars (4) to lock it.
Insert side panels (3) and middle side panel (5,6) into bottom panel (2), then insert and secure
cam lock (C) into side panels (3) and middle side panel (5,6) to lock it.

P. 9
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 9
Step 10
Insert the top panel (1) to side panels (3) and middle side panel (5,6), then insert and secure
cam lock (C) into side panels (3) and middle side panel (5,6) to lock it.
Secure back panels (18,19) with screw (Q)

P. 10
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 11
Step 12
Secure drawer side panels (9,10) to drawer back panel (12) with screw (R).
Insert drawer base panel (17) as per diagram. Insert drawer front panel (11) into drawer side
panel (9,10), then insert and secure cam lock (C) to drawer side panel (9,10) to lock it.

P. 11
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 13
Step 14
Secure drawer side panels (13,14) to drawer back panel (16) with screw (R).
Insert drawer base panel (17) as per diagram. Insert drawer front panel (15) into drawer side
panel (13,14), then insert and secure cam lock (C) to drawer side panel (13,14) to lock it.

P. 12
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 15
Step 16
Place sticker (T) over holes inside drawers as per diagram.
Insert the drawer (11,15) carefully as per diagram.

P. 13
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 17
Step 18
Insert shelf support pins (P) into side panels (3) and middle side panel (5,6).
Place shelfs (22) on top of the support pins (P).

P. 14
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 19
Step 20
Attach handle (F) to door (7,8) with handle screw (H). Secure hinge (D) to door (7,8) with
door hinge screws (E).
Secure hinge (D) and door (7,8) to side panels (3) with door hinge screw (E).

P. 15
Copyright © 2017, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 21
Step 22
Final Assembly
Options
For security, please remove the drawers and doors and using the Anti-Flip screw (U) set to
secure the console against the wall.