Walker Edison AF30ZANCT User manual

P.2
Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
VIII. Drill may be needed for securing product to wall.

P.3
Parts List
1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
2
3
4
5
6
7
8
9
999

A
B
C
D
E
F
G
J
K
pcs
10 pcs
Wooden dowel
Ø8x30mm
Ø6x35mm Cam bolt 4
pc
1
M 4 Hex Key
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
P.4
pcs
Cam lock
Ø15x11mm 4
pcs
4
Sticker
pcs
Ø6x12mm 19
Bolt
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
1pc
Glue tube
pcs
Ø6x25mm 4
Bolt
pcs
Screw
Ø4x38mm 4

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
C
C
C
C
1
Secure cam bolt (C) into part (1) with Philips head screwdriver as per diagram.