Walker Edison D52HARL User manual

P.1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 28/11/2019 (E)
®
Walker Edison
TM
Item # : D52HARL
Assembly Instructions

P.2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product .

P.3
Parts List
1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
2
3
5
4
66
88
7
7
7
9
10
10
10
10
11
12
13
13
14
14
19
15
17
17
16
18

P.4
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
Ø8x30mm Wooden dowelA 16 pcs
Ø6x35mm Cam boltB 8 pcs
Ø15x11mm Cam lockC 8 pcs
StickerD 8 pcs
Ø6x50mm ScrewE 8 pcs
M 4 Hex KeyF 1 pc
Ø1/4"x12mm BoltG 38 pcs
Ø1/4"x15mm BoltH 2 pcs
Ø1/4"x25mm BoltJ 3 pcs
BoltK 3 pcs
NutL 2 pcs
WrenchM 1 pc
Shelf support pin
N
12 pcs
Plastic wedge
P
12 pcs
Ø3x17mm Screw
Q
12 pcs
Ø4x12mm Screw
R
8 pcs
S
Drawer slider
T
1 set
U
V
Glue tube 1 pc
Hole cover 1 pc
*Note: This piece comes preassembled for
shipping purposes and must be disassembled
to complete the desk assembly.
Ø1/4"x45mm Bolt 3 pcs

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
3
5
U
U
U
U
V
V
Using screw (U) attach drawer slider (V) to parts (3,5) with Philips head screwdriver as per
diagram.

P.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
15
16
17 17
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Insert wooden dowel (A) into parts (15,16,17) as per diagram.

Step 3
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
11
B
B
B
B
B
B
B
B
Secure cam bolt (B) into part (11) with Philips head screwdriver as per diagram.

Step 4
P.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
11
17
17
15
C
C
C
CC
C
Using cam lock(C) secure parts (15,17) to part (11) with Philips head screwdriver as per diagram.

P.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5 21 3
11
16
C
C
Using cam lock(C) secure part (16) to part (11) with Philips head screwdriver as per diagram.

P.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 6
11
16
17
17
15
12
13
13
Put parts (12,13) as per diagram.