Walker Edison LEEBD User manual

Assembly Instructions
Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved.
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Revised 06/2022
P.1
LEEBD

I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate
the appropriate hole for the dowel, place a small amount of glue in the hole and insert
the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts together,
place a small amount of glue on the end of the dowel before attaching parts together.
Wipe away excess glue immediately.
VI. A Phillips head screwdriver and hammer is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
General Assembly Guidelines
P.2

P.3
2
10
16
Top panel
1 0 pcs1
Left side panel
2 01 pcs
Right side panel
3 01 pcs
40 pcs1
5Middle panel 01 pcs
706 pcs
14 0 pcs1
9 0 pcs2
Drawer left side
10 0 pcs2
Description QtyPart# Description QtyPart#
Drawer right side
11 0 pcs6
12 06 pcs
Drawer bottom
8 01 pcs
16 0 pcs4
15 0 pcs6
Back anelp low
606 pcs
Parts List
Base panel
Drawer front
Drawer back
Top crossbeam
Bottom front crossbeam
Bottom side crossbeam Leg
6
12
15
7
13
25 0 pc1 s
Central Leg
12x
6x
11
17
17
3
16
16
16
10
9
9
25
17
17
17 0 pcs4
Front crossbeam
18 0 pcs1
Back anelp up
13 12 pcs
Drawer runner
Description QtyPart#
4
1
18
8
14
5
The side drawer with WARNING LABEL,
nshould be mou ted in highest drawer.
12

Philips head screwdriver required for assembly
(not included)
Hammer recommended for assembly
(not included)
Hardware List
A
B
C
D
E
F
G
H
J
K
L
M
Ø8*20mm Wood dowel 24 pcs
Ø8*30mm Wood dowel 90 pcs
Ø3,0*12mm Screw 24 pcs
Ø4,0*25mm Screw 24 pcs
Ø6mm 01 pc
Ø7,0*70mm Screw 05 pcs
-Hex Key 01 pc
- Handle 12 pcs
Washer 02 pcs
Ø4,0*30mm Screw 83 pcs
Ø4,0*40mm Screw 17 pcs
I- Glue 01 pc
Wall anchor 01 pc
-
P.4
-
-
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
O24 pc
Nail
Ø8,0*8mm
NØ3,5*20mm Screw 04 pcs

Insert wood dowel (B) and glue (I) 1 3into part ( ), ( ),
4 (5), (9), 1 2 , 7 .( ), (8), (1 ), (1 ) (1 )
Insert ood dowel ( ) into part ( ).w A and glue ( ) 13I
Step 1
P.5
B66
Ø8*30mm
A24
Ø8*20mm
I01
B
B
B
B
B
B
8
B
B
B
3
A
A
13
12x
B
B
B
4
B
B
B
B
B
B
1
B
B
9
2x
B
B
B
B
4x 17
B
B
B
B
B
B
5
6x 11
B
B
6x 12
B
B
Please assemble on
a clean soft surface
to avoid damage.
A

Step 2
D
Secure parts (13) to
part (3) and (4) with screw (D)
and screwdriver (not included).
P.6
D
D
D
D
D
3
13
13
13
Step 3
1
8
Secure part (8) to part (1) with screw (E) and screwdriver (not included).
D
D
D
D
D
D
4
13
13
13
D12
Ø4,0*25mm
E
Ø4,0*30mm 02
8
1
E
E
TOP
TOP
Please assemble on
a clean soft surface
to avoid damage.
E
1
3
13
D

Step 5
Step 4
Secure parts (17) to part (5)
with screw (E) and screwdriver (not included).
P.7
E1
1
Secure part (5) to part (1) with screw (E)
and screwdriver (not included).
E
1
E
E
E
E03
Ø4,0*30mm
E02
Ø4,0*30mm
E
17
5
5
17
5
8
E
unpainted!
beveled side!
17
E
1
8

Step 7
Step 6
Secure parts (17) to part (5)
with screw (E) and screwdriver (not included).
P.8
Secure parts (1) (17) to part (4) with screw (E)and
and screwdriver (not included).
4
E05
Ø4,0*30mm
E02
Ø4,0*30mm
E
E
17
1
5
17
5
E
E
E
E
E
17
17
E
E
beveled side!
unpainted!

Step 9
Step 8
P.9
Secure parts (1) and ( ) to part (3)17
with screw (E) and screwdriver (not included).
E
E
F
2x
Secure part ( ) to part ( ),9 s 16
Fwith screw ( ) and
screwdriver (not included).
16
16
9
F
E
3
E05
Ø4,0*30mm
F04
Ø4,0*40mm
17 E
E
17
E
1
9
F

Step 10
Step 11
Secure part ( ) to part ( ),s 10 s 16
Fwith screw ( ) and
screwdriver (not included).
Secure the part (1 ) to part (16),0
Fwith screw ( ) and
screwdriver (not included).
P.10
F
F
16
16
10
10
F
F
10
10
16
16
9
F02
Ø4,0*40mm
F02
Ø4,0*40mm
F
F

Step 13
Step 12
P.11
2
G
G
G
G
Secure part (2) to part (16)
.with screw (G) and hex key (H)
2
16
16
16
s (9) andSecure part (10) to part (2)
and attach with screw (E) and
screwdriver (not included).
E
E
E
E
E
E
E
E
E
E
9
10
9
10
Ø * 0mm7,0 7
G04
H01
E10
Ø4,0*30mm
G
H
E

Step 14
25
G
H
G
2
Attach part 25( ) to part (2)
with screw (G) and hex key (H).
Ø * 0mm7,0 7
G01
H01
Step 15
Secure part ( ) to part ( )2 3 ,
(4) and (5) Fwith screw ( )
and screwdriver (not included).
F
F
F
F
F
F
F
F
F
2
F09
Ø4,0*40mm
P.12
3
5
4
F3

Step 17
Step 16
P.13
E
8
E
8
At ach part (8) to part ( ) and (4) with screw (E)t 3
and screwdriver (not included).
Secure back panel (14) as show atlow
above to body with screw (N)
and screwdriver (not included).
N
N
Secure back panel up (18) as shown
at above view to body with nails (O)
and hammer (not included).
4
3
E04
Ø4,0*30mm
14
E
N
N
E
Ø3,5*20mm
N04
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Ø8*8mm
O24
18 O
Name and address of
the supplier and date of
production.
N
14
E

Secure parts (13) to part (5) with screw (D)
and screwdriver (not included).
P.14
Step 18
13
13
13
13
D12
Ø4,0*25mm
5
D
5
13

P.15
Step 20
Step 19
EEEE
E
E
11
12
6
7
6
15 6x
11
12
E
E
7
11
12
Secure handle (J) with screw (C) and
screwdriver (not included), in the pre holes on the drawer front.
E48
Ø4,0*30mm
Secure part (11) and (12) to part (6)
with screw (E) and screwdriver (not included).
Insert part (15) and (7) between parts (11) and (12).
Secure part (7) with screw (E) and
screwdriver (not included).
C24
Ø3,0*12mm
J12
E
E
CC
J
6
CC
J
6x
C

Step 21
P.16
Insert ood dowel ( ) into part ( )w B 13
to be the stop of the drawer.
B
B
B
B
13
B
B12
Ø8*30mm
25
13
B
B
B
B
B
B
B
B

Step 22
Drawer Stop
Insert wood dowel ( ) on the inside of all drawers while drawer is inside the unit.B
Make sure dowel is flush with panel.
P.17
B12
Ø8*30mm
B
B
B
B
B
B
The side drawer with WARNING LABEL,
nshould be mou ted in highest drawer.
B

Step 23
Ø6mm
P.18
=
=
WARNING
Serious or fatal injuries can occur from furniture tipping over. To prevent the
furniture from tipping over we recommend that it is permanently fixed to the wall.
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before installing, as different
wall materials may require different types of anchors.
Name and address information for the manufacturer responsible
for the anti-tip hardware and date of production can be found on
the label on the back of the furniture.
K01
E02
Ø4,0*30mm
L02
M01
Attach screw (E) into washer (L),
securing wall anchor (M) at the top
middle part (1).
Drill your wall with a 6mm drill (not included)
and insert hardware (K), securing wall anchor
(M) gift asher (L) and screw (E) in the wall.
Back panel
Top
Top
Wall
1º 2º
E
L
M
M
L
E
K

Assembly Complete!
Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1.Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood)
3.Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.
Step 24
P.19
75
lbs
20
lbs